ARM: OMAP: duplicate plat-omap/clock.c into mach-omap[12]/clock.c

Duplicate arch/arm/plat-omap/clock.c into arch/arm/mach-omap1/clock.c
and arch/arm/mach-omap2/clock.c.  This is to support people who are working
on the ARM single image kernel and the OMAP common clock framework
conversion.
Signed-off-by: Paul Walmsley <paul@pwsan.com>
Cc: Tony Lindgren <tony@atomide.com>
Signed-off-by: Tony Lindgren <tony@atomide.com>

arch/arm/mach-omap1/clock_data.c

@@ -766,14 +766,6 @@ static struct omap_clk omap_clks[] = {
  * init
  */
 
-static struct clk_functions omap1_clk_functions = {
-	.clk_enable		= omap1_clk_enable,
-	.clk_disable		= omap1_clk_disable,
-	.clk_round_rate		= omap1_clk_round_rate,
-	.clk_set_rate		= omap1_clk_set_rate,
-	.clk_disable_unused	= omap1_clk_disable_unused,
-};
-
 static void __init omap1_show_rates(void)
 {
 	pr_notice("Clocking rate (xtal/DPLL1/MPU): %ld.%01ld/%ld.%01ld/%ld.%01ld MHz\n",
@@ -804,8 +796,6 @@ int __init omap1_clk_init(void)
 	if (!cpu_is_omap15xx())
 		omap_writew(0, SOFT_REQ_REG2);
 
-	clk_init(&omap1_clk_functions);
-
 	/* By default all idlect1 clocks are allowed to idle */
 	arm_idlect1_mask = ~0;
 

arch/arm/mach-omap2/clock2420_data.c

@@ -1935,8 +1935,6 @@ int __init omap2420_clk_init(void)
 	cpu_mask = RATE_IN_242X;
 	rate_table = omap2420_rate_table;
 
-	clk_init(&omap2_clk_functions);
-
 	for (c = omap2420_clks; c < omap2420_clks + ARRAY_SIZE(omap2420_clks);
 	     c++)
 		clk_preinit(c->lk.clk);

arch/arm/mach-omap2/clock2430_data.c

@@ -2034,8 +2034,6 @@ int __init omap2430_clk_init(void)
 	cpu_mask = RATE_IN_243X;
 	rate_table = omap2430_rate_table;
 
-	clk_init(&omap2_clk_functions);
-
 	for (c = omap2430_clks; c < omap2430_clks + ARRAY_SIZE(omap2430_clks);
 	     c++)
 		clk_preinit(c->lk.clk);

arch/arm/mach-omap2/clock33xx_data.c

@@ -1085,8 +1085,6 @@ int __init am33xx_clk_init(void)
 		cpu_clkflg = CK_AM33XX;
 	}
 
-	clk_init(&omap2_clk_functions);
-
 	for (c = am33xx_clks; c < am33xx_clks + ARRAY_SIZE(am33xx_clks); c++)
 		clk_preinit(c->lk.clk);
 

arch/arm/mach-omap2/clock3xxx_data.c

@@ -3573,8 +3573,6 @@ int __init omap3xxx_clk_init(void)
 	else
 		dpll4_dd = dpll4_dd_34xx;
 
-	clk_init(&omap2_clk_functions);
-
 	for (c = omap3xxx_clks; c < omap3xxx_clks + ARRAY_SIZE(omap3xxx_clks);
 	     c++)
 		clk_preinit(c->lk.clk);

arch/arm/mach-omap2/clock44xx_data.c

@@ -3366,8 +3366,6 @@ int __init omap4xxx_clk_init(void)
 		return 0;
 	}
 
-	clk_init(&omap2_clk_functions);
-
 	/*
 	 * Must stay commented until all OMAP SoC drivers are
 	 * converted to runtime PM, or drivers may start crashing

arch/arm/plat-omap/Makefile

@@ -3,7 +3,7 @@
 #
 
 # Common support
-obj-y := common.o sram.o clock.o dma.o fb.o counter_32k.o
+obj-y := common.o sram.o dma.o fb.o counter_32k.o
 obj-m :=
 obj-n :=
 obj-  :=