Commit 20118ff9 authored by Andrew Victor's avatar Andrew Victor Committed by Russell King

[ARM] 4603/1: KS8695: debugfs interface to view pin state

This patch adds a debug interface (if CONFIG_DEBUG_FS is selected) to
display the basic configuration and current state of the GPIO pins on
the Kendin/Micrel KS8695 processor.
Signed-off-by: default avatarAndrew Victor <andrew@sanpeople.com>
Signed-off-by: default avatarRussell King <rmk+kernel@arm.linux.org.uk>
parent 7d77ce8f
......@@ -20,6 +20,8 @@
#include <linux/kernel.h>
#include <linux/mm.h>
#include <linux/init.h>
#include <linux/debugfs.h>
#include <linux/seq_file.h>
#include <linux/module.h>
#include <asm/io.h>
......@@ -216,3 +218,84 @@ int irq_to_gpio(unsigned int irq)
return (irq - KS8695_IRQ_EXTERN0);
}
EXPORT_SYMBOL(irq_to_gpio);
/* .... Debug interface ..................................................... */
#ifdef CONFIG_DEBUG_FS
static int ks8695_gpio_show(struct seq_file *s, void *unused)
{
unsigned int enable[] = { IOPC_IOEINT0EN, IOPC_IOEINT1EN, IOPC_IOEINT2EN, IOPC_IOEINT3EN, IOPC_IOTIM0EN, IOPC_IOTIM1EN };
unsigned int intmask[] = { IOPC_IOEINT0TM, IOPC_IOEINT1TM, IOPC_IOEINT2TM, IOPC_IOEINT3TM };
unsigned long mode, ctrl, data;
int i;
mode = __raw_readl(KS8695_GPIO_VA + KS8695_IOPM);
ctrl = __raw_readl(KS8695_GPIO_VA + KS8695_IOPC);
data = __raw_readl(KS8695_GPIO_VA + KS8695_IOPD);
seq_printf(s, "Pin\tI/O\tFunction\tState\n\n");
for (i = KS8695_GPIO_0; i <= KS8695_GPIO_15 ; i++) {
seq_printf(s, "%i:\t", i);
seq_printf(s, "%s\t", (mode & IOPM_(i)) ? "Output" : "Input");
if (i <= KS8695_GPIO_3) {
if (ctrl & enable[i]) {
seq_printf(s, "EXT%i ", i);
switch ((ctrl & intmask[i]) >> (4 * i)) {
case IOPC_TM_LOW:
seq_printf(s, "(Low)"); break;
case IOPC_TM_HIGH:
seq_printf(s, "(High)"); break;
case IOPC_TM_RISING:
seq_printf(s, "(Rising)"); break;
case IOPC_TM_FALLING:
seq_printf(s, "(Falling)"); break;
case IOPC_TM_EDGE:
seq_printf(s, "(Edges)"); break;
}
}
else
seq_printf(s, "GPIO\t");
}
else if (i <= KS8695_GPIO_5) {
if (ctrl & enable[i])
seq_printf(s, "TOUT%i\t", i - KS8695_GPIO_4);
else
seq_printf(s, "GPIO\t");
}
else
seq_printf(s, "GPIO\t");
seq_printf(s, "\t");
seq_printf(s, "%i\n", (data & IOPD_(i)) ? 1 : 0);
}
return 0;
}
static int ks8695_gpio_open(struct inode *inode, struct file *file)
{
return single_open(file, ks8695_gpio_show, NULL);
}
static const struct file_operations ks8695_gpio_operations = {
.open = ks8695_gpio_open,
.read = seq_read,
.llseek = seq_lseek,
.release = single_release,
};
static int __init ks8695_gpio_debugfs_init(void)
{
/* /sys/kernel/debug/ks8695_gpio */
(void) debugfs_create_file("ks8695_gpio", S_IFREG | S_IRUGO, NULL, NULL, &ks8695_gpio_operations);
return 0;
}
postcore_initcall(ks8695_gpio_debugfs_init);
#endif
......@@ -49,5 +49,7 @@
#define IOPC_TM_FALLING (4) /* Falling Edge Detection */
#define IOPC_TM_EDGE (6) /* Both Edge Detection */
/* Port Data Register */
#define IOPD_(x) (1 << (x)) /* Signal Level of GPIO Pin x */
#endif
Markdown is supported
0%
or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment