phy: Enable compile testing for some of drivers

Some of the phy drivers can be compile tested to increase build
coverage.
Signed-off-by: Krzysztof Kozlowski <krzk@kernel.org>
Link: https://lore.kernel.org/r/20200103164710.4829-2-krzk@kernel.orgSigned-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

drivers/phy/allwinner/Kconfig

@@ -48,7 +48,8 @@ config PHY_SUN9I_USB
 
 config PHY_SUN50I_USB3
 	tristate "Allwinner H6 SoC USB3 PHY driver"
-	depends on ARCH_SUNXI && HAS_IOMEM && OF
+	depends on ARCH_SUNXI || COMPILE_TEST
+	depends on HAS_IOMEM && OF
 	depends on RESET_CONTROLLER
 	select GENERIC_PHY
 	help

drivers/phy/broadcom/Kconfig

@@ -50,7 +50,7 @@ config PHY_BCM_NS_USB3
 
 config PHY_NS2_PCIE
 	tristate "Broadcom Northstar2 PCIe PHY driver"
-	depends on OF && MDIO_BUS_MUX_BCM_IPROC
+	depends on (OF && MDIO_BUS_MUX_BCM_IPROC) || (COMPILE_TEST && MDIO_BUS)
 	select GENERIC_PHY
 	default ARCH_BCM_IPROC
 	help
@@ -83,7 +83,7 @@ config PHY_BRCM_SATA
 
 config PHY_BRCM_USB
 	tristate "Broadcom STB USB PHY driver"
-	depends on ARCH_BRCMSTB
+	depends on ARCH_BRCMSTB || COMPILE_TEST
 	depends on OF
 	select GENERIC_PHY
 	select SOC_BRCMSTB

drivers/phy/marvell/Kconfig

@@ -10,14 +10,16 @@ config ARMADA375_USBCLUSTER_PHY
 
 config PHY_BERLIN_SATA
 	tristate "Marvell Berlin SATA PHY driver"
-	depends on ARCH_BERLIN && HAS_IOMEM && OF
+	depends on ARCH_BERLIN || COMPILE_TEST
+	depends on OF && HAS_IOMEM
 	select GENERIC_PHY
 	help
 	  Enable this to support the SATA PHY on Marvell Berlin SoCs.
 
 config PHY_BERLIN_USB
 	tristate "Marvell Berlin USB PHY Driver"
-	depends on ARCH_BERLIN && RESET_CONTROLLER && HAS_IOMEM && OF
+	depends on ARCH_BERLIN || COMPILE_TEST
+	depends on OF && HAS_IOMEM && RESET_CONTROLLER
 	select GENERIC_PHY
 	help
 	  Enable this to support the USB PHY on Marvell Berlin SoCs.
@@ -95,7 +97,7 @@ config PHY_PXA_28NM_USB2
 
 config PHY_PXA_USB
 	tristate "Marvell PXA USB PHY Driver"
-	depends on ARCH_PXA || ARCH_MMP
+	depends on ARCH_PXA || ARCH_MMP || COMPILE_TEST
 	select GENERIC_PHY
 	help
 	  Enable this to support Marvell PXA USB PHY driver for Marvell

drivers/phy/mediatek/Kconfig

@@ -4,7 +4,9 @@
 #
 config PHY_MTK_TPHY
     tristate "MediaTek T-PHY Driver"
-    depends on ARCH_MEDIATEK && OF
+	depends on ARCH_MEDIATEK && OF
+	depends on ARCH_MEDIATEK || COMPILE_TEST
+	depends on OF
     select GENERIC_PHY
     help
       Say 'Y' here to add support for MediaTek T-PHY driver,
@@ -16,7 +18,8 @@ config PHY_MTK_TPHY
 
 config PHY_MTK_UFS
 	tristate "MediaTek UFS M-PHY driver"
-	depends on ARCH_MEDIATEK && OF
+	depends on ARCH_MEDIATEK || COMPILE_TEST
+	depends on OF
 	select GENERIC_PHY
 	help
 	  Support for UFS M-PHY on MediaTek chipsets.
@@ -26,7 +29,8 @@ config PHY_MTK_UFS
 
 config PHY_MTK_XSPHY
     tristate "MediaTek XS-PHY Driver"
-    depends on ARCH_MEDIATEK && OF
+	depends on ARCH_MEDIATEK || COMPILE_TEST
+	depends on OF
     select GENERIC_PHY
     help
 	  Enable this to support the SuperSpeedPlus XS-PHY transceiver for

drivers/phy/samsung/Kconfig

@@ -32,7 +32,7 @@ config PHY_EXYNOS_PCIE
 config PHY_SAMSUNG_USB2
 	tristate "Samsung USB 2.0 PHY driver"
 	depends on HAS_IOMEM
-	depends on USB_EHCI_EXYNOS || USB_OHCI_EXYNOS || USB_DWC2
+	depends on USB_EHCI_EXYNOS || USB_OHCI_EXYNOS || USB_DWC2 || COMPILE_TEST
 	select GENERIC_PHY
 	select MFD_SYSCON
 	default ARCH_EXYNOS
@@ -60,7 +60,7 @@ config PHY_EXYNOS5250_USB2
 config PHY_S5PV210_USB2
 	bool "Support for S5PV210"
 	depends on PHY_SAMSUNG_USB2
-	depends on ARCH_S5PV210
+	depends on ARCH_S5PV210 || COMPILE_TEST
 	help
 	  Enable USB PHY support for S5PV210. This option requires that Samsung
 	  USB 2.0 PHY driver is enabled and means that support for this
@@ -69,7 +69,7 @@ config PHY_S5PV210_USB2
 
 config PHY_EXYNOS5_USBDRD
 	tristate "Exynos5 SoC series USB DRD PHY driver"
-	depends on ARCH_EXYNOS && OF
+	depends on (ARCH_EXYNOS && OF) || COMPILE_TEST
 	depends on HAS_IOMEM
 	depends on USB_DWC3_EXYNOS
 	select GENERIC_PHY
@@ -82,7 +82,7 @@ config PHY_EXYNOS5_USBDRD
 
 config PHY_EXYNOS5250_SATA
 	tristate "Exynos5250 Sata SerDes/PHY driver"
-	depends on SOC_EXYNOS5250
+	depends on SOC_EXYNOS5250 || COMPILE_TEST
 	depends on HAS_IOMEM
 	depends on OF
 	select GENERIC_PHY

drivers/phy/ti/Kconfig

@@ -4,7 +4,7 @@
 #
 config PHY_DA8XX_USB
 	tristate "TI DA8xx USB PHY Driver"
-	depends on ARCH_DAVINCI_DA8XX
+	depends on ARCH_DAVINCI_DA8XX || COMPILE_TEST
 	select GENERIC_PHY
 	select MFD_SYSCON
 	help
@@ -14,7 +14,7 @@ config PHY_DA8XX_USB
 
 config PHY_DM816X_USB
 	tristate "TI dm816x USB PHY driver"
-	depends on ARCH_OMAP2PLUS
+	depends on ARCH_OMAP2PLUS || COMPILE_TEST
 	depends on USB_SUPPORT
 	select GENERIC_PHY
 	select USB_PHY