mx2_camera: Add soc_camera support for i.MX25/i.MX27

This is the soc_camera support developed by Sascha Hauer for the i.MX27.  Alan
Carvalho de Assis modified the original driver to get it working on more recent
kernels. I modified it further to add support for i.MX25. This driver has been
tested on i.MX25 and i.MX27 based platforms.
Signed-off-by: Baruch Siach <baruch@tkos.co.il>
Acked-by: Guennadi Liakhovetski <g.liakhovetski@gmx.de>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>

arch/arm/plat-mxc/include/mach/memory.h

@@ -44,12 +44,12 @@
  */
 #define CONSISTENT_DMA_SIZE SZ_8M
 
-#elif defined(CONFIG_MX1_VIDEO)
+#elif defined(CONFIG_MX1_VIDEO) || defined(CONFIG_VIDEO_MX2_HOSTSUPPORT)
 /*
  * Increase size of DMA-consistent memory region.
  * This is required for i.MX camera driver to capture at least four VGA frames.
  */
 #define CONSISTENT_DMA_SIZE SZ_4M
-#endif /* CONFIG_MX1_VIDEO */
+#endif /* CONFIG_MX1_VIDEO || CONFIG_VIDEO_MX2_HOSTSUPPORT */
 
 #endif /* __ASM_ARCH_MXC_MEMORY_H__ */

arch/arm/plat-mxc/include/mach/mx2_cam.h

+/*
+ * mx2-cam.h - i.MX27/i.MX25 camera driver header file
+ *
+ * Copyright (C) 2003, Intel Corporation
+ * Copyright (C) 2008, Sascha Hauer <s.hauer@pengutronix.de>
+ * Copyright (C) 2010, Baruch Siach <baruch@tkos.co.il>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 51 Franklin St - Fifth Floor, Boston, MA 02110-1301 USA.
+ */
+
+#ifndef __MACH_MX2_CAM_H_
+#define __MACH_MX2_CAM_H_
+
+#define MX2_CAMERA_SWAP16		(1 << 0)
+#define MX2_CAMERA_EXT_VSYNC		(1 << 1)
+#define MX2_CAMERA_CCIR			(1 << 2)
+#define MX2_CAMERA_CCIR_INTERLACE	(1 << 3)
+#define MX2_CAMERA_HSYNC_HIGH		(1 << 4)
+#define MX2_CAMERA_GATED_CLOCK		(1 << 5)
+#define MX2_CAMERA_INV_DATA		(1 << 6)
+#define MX2_CAMERA_PCLK_SAMPLE_RISING	(1 << 7)
+#define MX2_CAMERA_PACK_DIR_MSB		(1 << 8)
+
+/**
+ * struct mx2_camera_platform_data - optional platform data for mx2_camera
+ * @flags: any combination of MX2_CAMERA_*
+ * @clk: clock rate of the csi block / 2
+ */
+struct mx2_camera_platform_data {
+	unsigned long flags;
+	unsigned long clk;
+};
+
+#endif /* __MACH_MX2_CAM_H_ */

drivers/media/video/Kconfig

@@ -969,6 +969,19 @@ config VIDEO_OMAP2
 	---help---
 	  This is a v4l2 driver for the TI OMAP2 camera capture interface
 
+config VIDEO_MX2_HOSTSUPPORT
+        bool
+
+config VIDEO_MX2
+	tristate "i.MX27/i.MX25 Camera Sensor Interface driver"
+	depends on VIDEO_DEV && SOC_CAMERA && (MACH_MX27 || ARCH_MX25)
+	select VIDEOBUF_DMA_CONTIG
+	select VIDEO_MX2_HOSTSUPPORT
+	---help---
+	  This is a v4l2 driver for the i.MX27 and the i.MX25 Camera Sensor
+	  Interface
+
+
 #
 # USB Multimedia device configuration
 #

drivers/media/video/Makefile

@@ -162,6 +162,7 @@ obj-$(CONFIG_SOC_CAMERA)		+= soc_camera.o soc_mediabus.o
 obj-$(CONFIG_SOC_CAMERA_PLATFORM)	+= soc_camera_platform.o
 # soc-camera host drivers have to be linked after camera drivers
 obj-$(CONFIG_VIDEO_MX1)			+= mx1_camera.o
+obj-$(CONFIG_VIDEO_MX2)			+= mx2_camera.o
 obj-$(CONFIG_VIDEO_MX3)			+= mx3_camera.o
 obj-$(CONFIG_VIDEO_PXA27x)		+= pxa_camera.o
 obj-$(CONFIG_VIDEO_SH_MOBILE_CEU)	+= sh_mobile_ceu_camera.o