Commit 20780fcc authored by Sangbeom Kim's avatar Sangbeom Kim Committed by Kukjin Kim

ARM: S5P: Update machine of S5P64X0 and S5PV210 for HRT

This patch adds support HRT for machines of S5P64X0 and S5PV210.
Basically, PWM Timer3 is used for clockevent and PWM Timer4 is
used for clocksource. Since PWM Timer3 is used for other purpose,
PWM Timer2 is used on SMDKV210.
Signed-off-by: default avatarSangbeom Kim <sbkim73@samsung.com>
Signed-off-by: default avatarKukjin Kim <kgene.kim@samsung.com>
parent f8bfff8e
......@@ -45,6 +45,7 @@
#include <plat/pll.h>
#include <plat/adc.h>
#include <plat/ts.h>
#include <plat/s5p-time.h>
#define SMDK6440_UCON_DEFAULT (S3C2410_UCON_TXILEVEL | \
S3C2410_UCON_RXILEVEL | \
......@@ -179,6 +180,7 @@ static void __init smdk6440_map_io(void)
s5p_init_io(NULL, 0, S5P64X0_SYS_ID);
s3c24xx_init_clocks(12000000);
s3c24xx_init_uarts(smdk6440_uartcfgs, ARRAY_SIZE(smdk6440_uartcfgs));
s5p_set_timer_source(S5P_PWM3, S5P_PWM4);
}
static void __init smdk6440_machine_init(void)
......@@ -202,5 +204,5 @@ MACHINE_START(SMDK6440, "SMDK6440")
.init_irq = s5p6440_init_irq,
.map_io = smdk6440_map_io,
.init_machine = smdk6440_machine_init,
.timer = &s3c24xx_timer,
.timer = &s5p_timer,
MACHINE_END
......@@ -45,6 +45,7 @@
#include <plat/pll.h>
#include <plat/adc.h>
#include <plat/ts.h>
#include <plat/s5p-time.h>
#define SMDK6450_UCON_DEFAULT (S3C2410_UCON_TXILEVEL | \
S3C2410_UCON_RXILEVEL | \
......@@ -198,6 +199,7 @@ static void __init smdk6450_map_io(void)
s5p_init_io(NULL, 0, S5P64X0_SYS_ID);
s3c24xx_init_clocks(19200000);
s3c24xx_init_uarts(smdk6450_uartcfgs, ARRAY_SIZE(smdk6450_uartcfgs));
s5p_set_timer_source(S5P_PWM3, S5P_PWM4);
}
static void __init smdk6450_machine_init(void)
......@@ -221,5 +223,5 @@ MACHINE_START(SMDK6450, "SMDK6450")
.init_irq = s5p6450_init_irq,
.map_io = smdk6450_map_io,
.init_machine = smdk6450_machine_init,
.timer = &s3c24xx_timer,
.timer = &s5p_timer,
MACHINE_END
......@@ -39,6 +39,7 @@
#include <plat/fb.h>
#include <plat/fimc-core.h>
#include <plat/sdhci.h>
#include <plat/s5p-time.h>
/* Following are default values for UCON, ULCON and UFCON UART registers */
#define AQUILA_UCON_DEFAULT (S3C2410_UCON_TXILEVEL | \
......@@ -646,6 +647,7 @@ static void __init aquila_map_io(void)
s5p_init_io(NULL, 0, S5P_VA_CHIPID);
s3c24xx_init_clocks(24000000);
s3c24xx_init_uarts(aquila_uartcfgs, ARRAY_SIZE(aquila_uartcfgs));
s5p_set_timer_source(S5P_PWM3, S5P_PWM4);
}
static void __init aquila_machine_init(void)
......@@ -680,5 +682,5 @@ MACHINE_START(AQUILA, "Aquila")
.init_irq = s5pv210_init_irq,
.map_io = aquila_map_io,
.init_machine = aquila_machine_init,
.timer = &s3c24xx_timer,
.timer = &s5p_timer,
MACHINE_END
......@@ -45,6 +45,7 @@
#include <plat/keypad.h>
#include <plat/sdhci.h>
#include <plat/clock.h>
#include <plat/s5p-time.h>
/* Following are default values for UCON, ULCON and UFCON UART registers */
#define GONI_UCON_DEFAULT (S3C2410_UCON_TXILEVEL | \
......@@ -835,6 +836,7 @@ static void __init goni_map_io(void)
s5p_init_io(NULL, 0, S5P_VA_CHIPID);
s3c24xx_init_clocks(24000000);
s3c24xx_init_uarts(goni_uartcfgs, ARRAY_SIZE(goni_uartcfgs));
s5p_set_timer_source(S5P_PWM3, S5P_PWM4);
}
static void __init goni_machine_init(void)
......@@ -888,5 +890,5 @@ MACHINE_START(GONI, "GONI")
.init_irq = s5pv210_init_irq,
.map_io = goni_map_io,
.init_machine = goni_machine_init,
.timer = &s3c24xx_timer,
.timer = &s5p_timer,
MACHINE_END
......@@ -30,6 +30,7 @@
#include <plat/ata.h>
#include <plat/iic.h>
#include <plat/pm.h>
#include <plat/s5p-time.h>
/* Following are default values for UCON, ULCON and UFCON UART registers */
#define SMDKC110_UCON_DEFAULT (S3C2410_UCON_TXILEVEL | \
......@@ -111,6 +112,7 @@ static void __init smdkc110_map_io(void)
s5p_init_io(NULL, 0, S5P_VA_CHIPID);
s3c24xx_init_clocks(24000000);
s3c24xx_init_uarts(smdkv210_uartcfgs, ARRAY_SIZE(smdkv210_uartcfgs));
s5p_set_timer_source(S5P_PWM3, S5P_PWM4);
}
static void __init smdkc110_machine_init(void)
......@@ -138,5 +140,5 @@ MACHINE_START(SMDKC110, "SMDKC110")
.init_irq = s5pv210_init_irq,
.map_io = smdkc110_map_io,
.init_machine = smdkc110_machine_init,
.timer = &s3c24xx_timer,
.timer = &s5p_timer,
MACHINE_END
......@@ -45,6 +45,7 @@
#include <plat/pm.h>
#include <plat/fb.h>
#include <plat/gpio-cfg.h>
#include <plat/s5p-time.h>
/* Following are default values for UCON, ULCON and UFCON UART registers */
#define SMDKV210_UCON_DEFAULT (S3C2410_UCON_TXILEVEL | \
......@@ -315,6 +316,7 @@ static void __init smdkv210_map_io(void)
s5p_init_io(NULL, 0, S5P_VA_CHIPID);
s3c24xx_init_clocks(24000000);
s3c24xx_init_uarts(smdkv210_uartcfgs, ARRAY_SIZE(smdkv210_uartcfgs));
s5p_set_timer_source(S5P_PWM2, S5P_PWM4);
}
static void __init smdkv210_machine_init(void)
......@@ -349,5 +351,5 @@ MACHINE_START(SMDKV210, "SMDKV210")
.init_irq = s5pv210_init_irq,
.map_io = smdkv210_map_io,
.init_machine = smdkv210_machine_init,
.timer = &s3c24xx_timer,
.timer = &s5p_timer,
MACHINE_END
......@@ -27,6 +27,7 @@
#include <plat/devs.h>
#include <plat/cpu.h>
#include <plat/iic.h>
#include <plat/s5p-time.h>
/* Following are default values for UCON, ULCON and UFCON UART registers */
#define TORBRECK_UCON_DEFAULT (S3C2410_UCON_TXILEVEL | \
......@@ -104,6 +105,7 @@ static void __init torbreck_map_io(void)
s5p_init_io(NULL, 0, S5P_VA_CHIPID);
s3c24xx_init_clocks(24000000);
s3c24xx_init_uarts(torbreck_uartcfgs, ARRAY_SIZE(torbreck_uartcfgs));
s5p_set_timer_source(S5P_PWM3, S5P_PWM4);
}
static void __init torbreck_machine_init(void)
......@@ -127,5 +129,5 @@ MACHINE_START(TORBRECK, "TORBRECK")
.init_irq = s5pv210_init_irq,
.map_io = torbreck_map_io,
.init_machine = torbreck_machine_init,
.timer = &s3c24xx_timer,
.timer = &s5p_timer,
MACHINE_END
Markdown is supported
0%
or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment