Input: goodix - refactor reset handling

Refactor reset handling a bit, change the main reset handler
into a new goodix_reset_no_int_sync() helper and add a
goodix_reset() wrapper which calls goodix_int_sync()
separately.

Also push the dev_err() call on reset failure into the
goodix_reset_no_int_sync() and goodix_int_sync() functions,
so that we don't need to have separate dev_err() calls in
all their callers.

This is a preparation patch for adding support for controllers
without flash, which need to have their firmware uploaded and
need some other special handling too.
Reviewed-by: Bastien Nocera <hadess@hadess.net>
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Link: https://lore.kernel.org/r/20210920150643.155872-4-hdegoede@redhat.comSigned-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>

drivers/input/touchscreen/goodix.c

@@ -640,56 +640,76 @@ int goodix_int_sync(struct goodix_ts_data *ts)
 
 	error = goodix_irq_direction_output(ts, 0);
 	if (error)
-		return error;
+		goto error;
 
 	msleep(50);				/* T5: 50ms */
 
 	error = goodix_irq_direction_input(ts);
 	if (error)
-		return error;
+		goto error;
 
 	return 0;
+
+error:
+	dev_err(&ts->client->dev, "Controller irq sync failed.\n");
+	return error;
 }
 
 /**
- * goodix_reset - Reset device during power on
+ * goodix_reset_no_int_sync - Reset device, leaving interrupt line in output mode
  *
  * @ts: goodix_ts_data pointer
  */
-static int goodix_reset(struct goodix_ts_data *ts)
+int goodix_reset_no_int_sync(struct goodix_ts_data *ts)
 {
 	int error;
 
 	/* begin select I2C slave addr */
 	error = gpiod_direction_output(ts->gpiod_rst, 0);
 	if (error)
-		return error;
+		goto error;
 
 	msleep(20);				/* T2: > 10ms */
 
 	/* HIGH: 0x28/0x29, LOW: 0xBA/0xBB */
 	error = goodix_irq_direction_output(ts, ts->client->addr == 0x14);
 	if (error)
-		return error;
+		goto error;
 
 	usleep_range(100, 2000);		/* T3: > 100us */
 
 	error = gpiod_direction_output(ts->gpiod_rst, 1);
 	if (error)
-		return error;
+		goto error;
 
 	usleep_range(6000, 10000);		/* T4: > 5ms */
 
 	/* end select I2C slave addr */
 	error = gpiod_direction_input(ts->gpiod_rst);
 	if (error)
-		return error;
+		goto error;
 
-	error = goodix_int_sync(ts);
+	return 0;
+
+error:
+	dev_err(&ts->client->dev, "Controller reset failed.\n");
+	return error;
+}
+
+/**
+ * goodix_reset - Reset device during power on
+ *
+ * @ts: goodix_ts_data pointer
+ */
+static int goodix_reset(struct goodix_ts_data *ts)
+{
+	int error;
+
+	error = goodix_reset_no_int_sync(ts);
 	if (error)
 		return error;
 
-	return 0;
+	return goodix_int_sync(ts);
 }
 
 #ifdef ACPI_GPIO_SUPPORT
@@ -1195,10 +1215,8 @@ static int goodix_ts_probe(struct i2c_client *client,
 	if (ts->reset_controller_at_probe) {
 		/* reset the controller */
 		error = goodix_reset(ts);
-		if (error) {
-			dev_err(&client->dev, "Controller reset failed.\n");
+		if (error)
 			return error;
-		}
 	}
 
 	error = goodix_i2c_test(client);
@@ -1340,10 +1358,8 @@ static int __maybe_unused goodix_resume(struct device *dev)
 
 	if (error != 0 || config_ver != ts->config[0]) {
 		error = goodix_reset(ts);
-		if (error) {
-			dev_err(dev, "Controller reset failed.\n");
+		if (error)
 			return error;
-		}
 
 		error = goodix_send_cfg(ts, ts->config, ts->chip->config_len);
 		if (error)

drivers/input/touchscreen/goodix.h

@@ -69,5 +69,6 @@ int goodix_i2c_write(struct i2c_client *client, u16 reg, const u8 *buf, int len)
 int goodix_i2c_write_u8(struct i2c_client *client, u16 reg, u8 value);
 int goodix_send_cfg(struct goodix_ts_data *ts, const u8 *cfg, int len);
 int goodix_int_sync(struct goodix_ts_data *ts);
+int goodix_reset_no_int_sync(struct goodix_ts_data *ts);
 
 #endif