Commit 20c0c607 authored by Jason Cooper's avatar Jason Cooper

Merge tag 'tags/deps-irqchip-gic-3.17' into irqchip/core

From local branch irqchip/gic, this is topic branch that was set up to
facilitate merging other changes depending on the new GICv3 driver.
parents 885d078b 021f6537
......@@ -9,6 +9,7 @@ config ARM64
select ARM_AMBA
select ARM_ARCH_TIMER
select ARM_GIC
select ARM_GIC_V3
select BUILDTIME_EXTABLE_SORT
select CLONE_BACKWARDS
select COMMON_CLK
......
......@@ -22,6 +22,7 @@
#include <linux/linkage.h>
#include <linux/init.h>
#include <linux/irqchip/arm-gic-v3.h>
#include <asm/assembler.h>
#include <asm/ptrace.h>
......@@ -296,6 +297,23 @@ CPU_LE( bic x0, x0, #(3 << 24) ) // Clear the EE and E0E bits for EL1
msr cnthctl_el2, x0
msr cntvoff_el2, xzr // Clear virtual offset
#ifdef CONFIG_ARM_GIC_V3
/* GICv3 system register access */
mrs x0, id_aa64pfr0_el1
ubfx x0, x0, #24, #4
cmp x0, #1
b.ne 3f
mrs x0, ICC_SRE_EL2
orr x0, x0, #ICC_SRE_EL2_SRE // Set ICC_SRE_EL2.SRE==1
orr x0, x0, #ICC_SRE_EL2_ENABLE // Set ICC_SRE_EL2.Enable==1
msr ICC_SRE_EL2, x0
isb // Make sure SRE is now set
msr ICH_HCR_EL2, xzr // Reset ICC_HCR_EL2 to defaults
3:
#endif
/* Populate ID registers. */
mrs x0, midr_el1
mrs x1, mpidr_el1
......
......@@ -19,6 +19,7 @@
#include <linux/init.h>
#include <linux/linkage.h>
#include <linux/irqchip/arm-gic-v3.h>
#include <asm/assembler.h>
#include <asm/ptrace.h>
......
......@@ -10,6 +10,11 @@ config ARM_GIC
config GIC_NON_BANKED
bool
config ARM_GIC_V3
bool
select IRQ_DOMAIN
select MULTI_IRQ_HANDLER
config ARM_NVIC
bool
select IRQ_DOMAIN
......
......@@ -16,7 +16,8 @@ obj-$(CONFIG_ORION_IRQCHIP) += irq-orion.o
obj-$(CONFIG_ARCH_SUNXI) += irq-sun4i.o
obj-$(CONFIG_ARCH_SUNXI) += irq-sunxi-nmi.o
obj-$(CONFIG_ARCH_SPEAR3XX) += spear-shirq.o
obj-$(CONFIG_ARM_GIC) += irq-gic.o
obj-$(CONFIG_ARM_GIC) += irq-gic.o irq-gic-common.o
obj-$(CONFIG_ARM_GIC_V3) += irq-gic-v3.o irq-gic-common.o
obj-$(CONFIG_ARM_NVIC) += irq-nvic.o
obj-$(CONFIG_ARM_VIC) += irq-vic.o
obj-$(CONFIG_IMGPDC_IRQ) += irq-imgpdc.o
......
/*
* Copyright (C) 2002 ARM Limited, All Rights Reserved.
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License version 2 as
* published by the Free Software Foundation.
*
* This program is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
*
* You should have received a copy of the GNU General Public License
* along with this program. If not, see <http://www.gnu.org/licenses/>.
*/
#include <linux/interrupt.h>
#include <linux/io.h>
#include <linux/irq.h>
#include <linux/irqchip/arm-gic.h>
#include "irq-gic-common.h"
void gic_configure_irq(unsigned int irq, unsigned int type,
void __iomem *base, void (*sync_access)(void))
{
u32 enablemask = 1 << (irq % 32);
u32 enableoff = (irq / 32) * 4;
u32 confmask = 0x2 << ((irq % 16) * 2);
u32 confoff = (irq / 16) * 4;
bool enabled = false;
u32 val;
/*
* Read current configuration register, and insert the config
* for "irq", depending on "type".
*/
val = readl_relaxed(base + GIC_DIST_CONFIG + confoff);
if (type == IRQ_TYPE_LEVEL_HIGH)
val &= ~confmask;
else if (type == IRQ_TYPE_EDGE_RISING)
val |= confmask;
/*
* As recommended by the spec, disable the interrupt before changing
* the configuration
*/
if (readl_relaxed(base + GIC_DIST_ENABLE_SET + enableoff) & enablemask) {
writel_relaxed(enablemask, base + GIC_DIST_ENABLE_CLEAR + enableoff);
if (sync_access)
sync_access();
enabled = true;
}
/*
* Write back the new configuration, and possibly re-enable
* the interrupt.
*/
writel_relaxed(val, base + GIC_DIST_CONFIG + confoff);
if (enabled)
writel_relaxed(enablemask, base + GIC_DIST_ENABLE_SET + enableoff);
if (sync_access)
sync_access();
}
void __init gic_dist_config(void __iomem *base, int gic_irqs,
void (*sync_access)(void))
{
unsigned int i;
/*
* Set all global interrupts to be level triggered, active low.
*/
for (i = 32; i < gic_irqs; i += 16)
writel_relaxed(0, base + GIC_DIST_CONFIG + i / 4);
/*
* Set priority on all global interrupts.
*/
for (i = 32; i < gic_irqs; i += 4)
writel_relaxed(0xa0a0a0a0, base + GIC_DIST_PRI + i);
/*
* Disable all interrupts. Leave the PPI and SGIs alone
* as they are enabled by redistributor registers.
*/
for (i = 32; i < gic_irqs; i += 32)
writel_relaxed(0xffffffff, base + GIC_DIST_ENABLE_CLEAR + i / 8);
if (sync_access)
sync_access();
}
void gic_cpu_config(void __iomem *base, void (*sync_access)(void))
{
int i;
/*
* Deal with the banked PPI and SGI interrupts - disable all
* PPI interrupts, ensure all SGI interrupts are enabled.
*/
writel_relaxed(0xffff0000, base + GIC_DIST_ENABLE_CLEAR);
writel_relaxed(0x0000ffff, base + GIC_DIST_ENABLE_SET);
/*
* Set priority on PPI and SGI interrupts
*/
for (i = 0; i < 32; i += 4)
writel_relaxed(0xa0a0a0a0, base + GIC_DIST_PRI + i * 4 / 4);
if (sync_access)
sync_access();
}
/*
* Copyright (C) 2002 ARM Limited, All Rights Reserved.
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License version 2 as
* published by the Free Software Foundation.
*
* This program is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
*
* You should have received a copy of the GNU General Public License
* along with this program. If not, see <http://www.gnu.org/licenses/>.
*/
#ifndef _IRQ_GIC_COMMON_H
#define _IRQ_GIC_COMMON_H
#include <linux/of.h>
#include <linux/irqdomain.h>
void gic_configure_irq(unsigned int irq, unsigned int type,
void __iomem *base, void (*sync_access)(void));
void gic_dist_config(void __iomem *base, int gic_irqs,
void (*sync_access)(void));
void gic_cpu_config(void __iomem *base, void (*sync_access)(void));
#endif /* _IRQ_GIC_COMMON_H */
This diff is collapsed.
......@@ -46,6 +46,7 @@
#include <asm/exception.h>
#include <asm/smp_plat.h>
#include "irq-gic-common.h"
#include "irqchip.h"
union gic_base {
......@@ -188,12 +189,6 @@ static int gic_set_type(struct irq_data *d, unsigned int type)
{
void __iomem *base = gic_dist_base(d);
unsigned int gicirq = gic_irq(d);
u32 enablemask = 1 << (gicirq % 32);
u32 enableoff = (gicirq / 32) * 4;
u32 confmask = 0x2 << ((gicirq % 16) * 2);
u32 confoff = (gicirq / 16) * 4;
bool enabled = false;
u32 val;
/* Interrupt configuration for SGIs can't be changed */
if (gicirq < 16)
......@@ -207,25 +202,7 @@ static int gic_set_type(struct irq_data *d, unsigned int type)
if (gic_arch_extn.irq_set_type)
gic_arch_extn.irq_set_type(d, type);
val = readl_relaxed(base + GIC_DIST_CONFIG + confoff);
if (type == IRQ_TYPE_LEVEL_HIGH)
val &= ~confmask;
else if (type == IRQ_TYPE_EDGE_RISING)
val |= confmask;
/*
* As recommended by the spec, disable the interrupt before changing
* the configuration
*/
if (readl_relaxed(base + GIC_DIST_ENABLE_SET + enableoff) & enablemask) {
writel_relaxed(enablemask, base + GIC_DIST_ENABLE_CLEAR + enableoff);
enabled = true;
}
writel_relaxed(val, base + GIC_DIST_CONFIG + confoff);
if (enabled)
writel_relaxed(enablemask, base + GIC_DIST_ENABLE_SET + enableoff);
gic_configure_irq(gicirq, type, base, NULL);
raw_spin_unlock(&irq_controller_lock);
......@@ -386,12 +363,6 @@ static void __init gic_dist_init(struct gic_chip_data *gic)
writel_relaxed(0, base + GIC_DIST_CTRL);
/*
* Set all global interrupts to be level triggered, active low.
*/
for (i = 32; i < gic_irqs; i += 16)
writel_relaxed(0, base + GIC_DIST_CONFIG + i * 4 / 16);
/*
* Set all global interrupts to this CPU only.
*/
......@@ -401,18 +372,7 @@ static void __init gic_dist_init(struct gic_chip_data *gic)
for (i = 32; i < gic_irqs; i += 4)
writel_relaxed(cpumask, base + GIC_DIST_TARGET + i * 4 / 4);
/*
* Set priority on all global interrupts.
*/
for (i = 32; i < gic_irqs; i += 4)
writel_relaxed(0xa0a0a0a0, base + GIC_DIST_PRI + i * 4 / 4);
/*
* Disable all interrupts. Leave the PPI and SGIs alone
* as these enables are banked registers.
*/
for (i = 32; i < gic_irqs; i += 32)
writel_relaxed(0xffffffff, base + GIC_DIST_ENABLE_CLEAR + i * 4 / 32);
gic_dist_config(base, gic_irqs, NULL);
writel_relaxed(1, base + GIC_DIST_CTRL);
}
......@@ -439,18 +399,7 @@ static void gic_cpu_init(struct gic_chip_data *gic)
if (i != cpu)
gic_cpu_map[i] &= ~cpu_mask;
/*
* Deal with the banked PPI and SGI interrupts - disable all
* PPI interrupts, ensure all SGI interrupts are enabled.
*/
writel_relaxed(0xffff0000, dist_base + GIC_DIST_ENABLE_CLEAR);
writel_relaxed(0x0000ffff, dist_base + GIC_DIST_ENABLE_SET);
/*
* Set priority on PPI and SGI interrupts
*/
for (i = 0; i < 32; i += 4)
writel_relaxed(0xa0a0a0a0, dist_base + GIC_DIST_PRI + i * 4 / 4);
gic_cpu_config(dist_base, NULL);
writel_relaxed(0xf0, base + GIC_CPU_PRIMASK);
writel_relaxed(1, base + GIC_CPU_CTRL);
......
/*
* Copyright (C) 2013, 2014 ARM Limited, All Rights Reserved.
* Author: Marc Zyngier <marc.zyngier@arm.com>
*
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License version 2 as
* published by the Free Software Foundation.
*
* This program is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
*
* You should have received a copy of the GNU General Public License
* along with this program. If not, see <http://www.gnu.org/licenses/>.
*/
#ifndef __LINUX_IRQCHIP_ARM_GIC_V3_H
#define __LINUX_IRQCHIP_ARM_GIC_V3_H
/*
* Distributor registers. We assume we're running non-secure, with ARE
* being set. Secure-only and non-ARE registers are not described.
*/
#define GICD_CTLR 0x0000
#define GICD_TYPER 0x0004
#define GICD_IIDR 0x0008
#define GICD_STATUSR 0x0010
#define GICD_SETSPI_NSR 0x0040
#define GICD_CLRSPI_NSR 0x0048
#define GICD_SETSPI_SR 0x0050
#define GICD_CLRSPI_SR 0x0058
#define GICD_SEIR 0x0068
#define GICD_ISENABLER 0x0100
#define GICD_ICENABLER 0x0180
#define GICD_ISPENDR 0x0200
#define GICD_ICPENDR 0x0280
#define GICD_ISACTIVER 0x0300
#define GICD_ICACTIVER 0x0380
#define GICD_IPRIORITYR 0x0400
#define GICD_ICFGR 0x0C00
#define GICD_IROUTER 0x6000
#define GICD_PIDR2 0xFFE8
#define GICD_CTLR_RWP (1U << 31)
#define GICD_CTLR_ARE_NS (1U << 4)
#define GICD_CTLR_ENABLE_G1A (1U << 1)
#define GICD_CTLR_ENABLE_G1 (1U << 0)
#define GICD_IROUTER_SPI_MODE_ONE (0U << 31)
#define GICD_IROUTER_SPI_MODE_ANY (1U << 31)
#define GIC_PIDR2_ARCH_MASK 0xf0
#define GIC_PIDR2_ARCH_GICv3 0x30
#define GIC_PIDR2_ARCH_GICv4 0x40
/*
* Re-Distributor registers, offsets from RD_base
*/
#define GICR_CTLR GICD_CTLR
#define GICR_IIDR 0x0004
#define GICR_TYPER 0x0008
#define GICR_STATUSR GICD_STATUSR
#define GICR_WAKER 0x0014
#define GICR_SETLPIR 0x0040
#define GICR_CLRLPIR 0x0048
#define GICR_SEIR GICD_SEIR
#define GICR_PROPBASER 0x0070
#define GICR_PENDBASER 0x0078
#define GICR_INVLPIR 0x00A0
#define GICR_INVALLR 0x00B0
#define GICR_SYNCR 0x00C0
#define GICR_MOVLPIR 0x0100
#define GICR_MOVALLR 0x0110
#define GICR_PIDR2 GICD_PIDR2
#define GICR_WAKER_ProcessorSleep (1U << 1)
#define GICR_WAKER_ChildrenAsleep (1U << 2)
/*
* Re-Distributor registers, offsets from SGI_base
*/
#define GICR_ISENABLER0 GICD_ISENABLER
#define GICR_ICENABLER0 GICD_ICENABLER
#define GICR_ISPENDR0 GICD_ISPENDR
#define GICR_ICPENDR0 GICD_ICPENDR
#define GICR_ISACTIVER0 GICD_ISACTIVER
#define GICR_ICACTIVER0 GICD_ICACTIVER
#define GICR_IPRIORITYR0 GICD_IPRIORITYR
#define GICR_ICFGR0 GICD_ICFGR
#define GICR_TYPER_VLPIS (1U << 1)
#define GICR_TYPER_LAST (1U << 4)
/*
* CPU interface registers
*/
#define ICC_CTLR_EL1_EOImode_drop_dir (0U << 1)
#define ICC_CTLR_EL1_EOImode_drop (1U << 1)
#define ICC_SRE_EL1_SRE (1U << 0)
/*
* Hypervisor interface registers (SRE only)
*/
#define ICH_LR_VIRTUAL_ID_MASK ((1UL << 32) - 1)
#define ICH_LR_EOI (1UL << 41)
#define ICH_LR_GROUP (1UL << 60)
#define ICH_LR_STATE (3UL << 62)
#define ICH_LR_PENDING_BIT (1UL << 62)
#define ICH_LR_ACTIVE_BIT (1UL << 63)
#define ICH_MISR_EOI (1 << 0)
#define ICH_MISR_U (1 << 1)
#define ICH_HCR_EN (1 << 0)
#define ICH_HCR_UIE (1 << 1)
#define ICH_VMCR_CTLR_SHIFT 0
#define ICH_VMCR_CTLR_MASK (0x21f << ICH_VMCR_CTLR_SHIFT)
#define ICH_VMCR_BPR1_SHIFT 18
#define ICH_VMCR_BPR1_MASK (7 << ICH_VMCR_BPR1_SHIFT)
#define ICH_VMCR_BPR0_SHIFT 21
#define ICH_VMCR_BPR0_MASK (7 << ICH_VMCR_BPR0_SHIFT)
#define ICH_VMCR_PMR_SHIFT 24
#define ICH_VMCR_PMR_MASK (0xffUL << ICH_VMCR_PMR_SHIFT)
#define ICC_EOIR1_EL1 S3_0_C12_C12_1
#define ICC_IAR1_EL1 S3_0_C12_C12_0
#define ICC_SGI1R_EL1 S3_0_C12_C11_5
#define ICC_PMR_EL1 S3_0_C4_C6_0
#define ICC_CTLR_EL1 S3_0_C12_C12_4
#define ICC_SRE_EL1 S3_0_C12_C12_5
#define ICC_GRPEN1_EL1 S3_0_C12_C12_7
#define ICC_IAR1_EL1_SPURIOUS 0x3ff
#define ICC_SRE_EL2 S3_4_C12_C9_5
#define ICC_SRE_EL2_SRE (1 << 0)
#define ICC_SRE_EL2_ENABLE (1 << 3)
/*
* System register definitions
*/
#define ICH_VSEIR_EL2 S3_4_C12_C9_4
#define ICH_HCR_EL2 S3_4_C12_C11_0
#define ICH_VTR_EL2 S3_4_C12_C11_1
#define ICH_MISR_EL2 S3_4_C12_C11_2
#define ICH_EISR_EL2 S3_4_C12_C11_3
#define ICH_ELSR_EL2 S3_4_C12_C11_5
#define ICH_VMCR_EL2 S3_4_C12_C11_7
#define __LR0_EL2(x) S3_4_C12_C12_ ## x
#define __LR8_EL2(x) S3_4_C12_C13_ ## x
#define ICH_LR0_EL2 __LR0_EL2(0)
#define ICH_LR1_EL2 __LR0_EL2(1)
#define ICH_LR2_EL2 __LR0_EL2(2)
#define ICH_LR3_EL2 __LR0_EL2(3)
#define ICH_LR4_EL2 __LR0_EL2(4)
#define ICH_LR5_EL2 __LR0_EL2(5)
#define ICH_LR6_EL2 __LR0_EL2(6)
#define ICH_LR7_EL2 __LR0_EL2(7)
#define ICH_LR8_EL2 __LR8_EL2(0)
#define ICH_LR9_EL2 __LR8_EL2(1)
#define ICH_LR10_EL2 __LR8_EL2(2)
#define ICH_LR11_EL2 __LR8_EL2(3)
#define ICH_LR12_EL2 __LR8_EL2(4)
#define ICH_LR13_EL2 __LR8_EL2(5)
#define ICH_LR14_EL2 __LR8_EL2(6)
#define ICH_LR15_EL2 __LR8_EL2(7)
#define __AP0Rx_EL2(x) S3_4_C12_C8_ ## x
#define ICH_AP0R0_EL2 __AP0Rx_EL2(0)
#define ICH_AP0R1_EL2 __AP0Rx_EL2(1)
#define ICH_AP0R2_EL2 __AP0Rx_EL2(2)
#define ICH_AP0R3_EL2 __AP0Rx_EL2(3)
#define __AP1Rx_EL2(x) S3_4_C12_C9_ ## x
#define ICH_AP1R0_EL2 __AP1Rx_EL2(0)
#define ICH_AP1R1_EL2 __AP1Rx_EL2(1)
#define ICH_AP1R2_EL2 __AP1Rx_EL2(2)
#define ICH_AP1R3_EL2 __AP1Rx_EL2(3)
#ifndef __ASSEMBLY__
#include <linux/stringify.h>
static inline void gic_write_eoir(u64 irq)
{
asm volatile("msr " __stringify(ICC_EOIR1_EL1) ", %0" : : "r" (irq));
isb();
}
#endif
#endif
Markdown is supported
0%
or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment