net: remove .ndo_change_proto_down

.ndo_change_proto_down was added seemingly to enable out-of-tree
implementations. Over 2.5yrs later we still have no real users
upstream. Hardwire the generic implementation for now, we can
revert once real users materialize. (rocker is a test vehicle,
not a user.)

We need to drop the optimization on the sysfs side, because
unlike ndos priv_flags will be changed at runtime, so we'd
need READ_ONCE/WRITE_ONCE everywhere..
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: David S. Miller <davem@davemloft.net>

drivers/net/ethernet/rocker/rocker_main.c

@@ -1995,17 +1995,6 @@ static int rocker_port_get_phys_port_name(struct net_device *dev,
 	return err ? -EOPNOTSUPP : 0;
 }
 
-static int rocker_port_change_proto_down(struct net_device *dev,
-					 bool proto_down)
-{
-	struct rocker_port *rocker_port = netdev_priv(dev);
-
-	if (rocker_port->dev->flags & IFF_UP)
-		rocker_port_set_enable(rocker_port, !proto_down);
-	rocker_port->dev->proto_down = proto_down;
-	return 0;
-}
-
 static void rocker_port_neigh_destroy(struct net_device *dev,
 				      struct neighbour *n)
 {
@@ -2037,7 +2026,6 @@ static const struct net_device_ops rocker_port_netdev_ops = {
 	.ndo_set_mac_address		= rocker_port_set_mac_address,
 	.ndo_change_mtu			= rocker_port_change_mtu,
 	.ndo_get_phys_port_name		= rocker_port_get_phys_port_name,
-	.ndo_change_proto_down		= rocker_port_change_proto_down,
 	.ndo_neigh_destroy		= rocker_port_neigh_destroy,
 	.ndo_get_port_parent_id		= rocker_port_get_port_parent_id,
 };

drivers/net/macvlan.c

@@ -1171,7 +1171,6 @@ static const struct net_device_ops macvlan_netdev_ops = {
 #endif
 	.ndo_get_iflink		= macvlan_dev_get_iflink,
 	.ndo_features_check	= passthru_features_check,
-	.ndo_change_proto_down  = dev_change_proto_down_generic,
 };
 
 void macvlan_common_setup(struct net_device *dev)
@@ -1182,7 +1181,7 @@ void macvlan_common_setup(struct net_device *dev)
 	dev->max_mtu		= ETH_MAX_MTU;
 	dev->priv_flags	       &= ~IFF_TX_SKB_SHARING;
 	netif_keep_dst(dev);
-	dev->priv_flags	       |= IFF_UNICAST_FLT;
+	dev->priv_flags	       |= IFF_UNICAST_FLT | IFF_CHANGE_PROTO_DOWN;
 	dev->netdev_ops		= &macvlan_netdev_ops;
 	dev->needs_free_netdev	= true;
 	dev->header_ops		= &macvlan_hard_header_ops;

drivers/net/vxlan.c

@@ -3234,7 +3234,6 @@ static const struct net_device_ops vxlan_netdev_ether_ops = {
 	.ndo_fdb_dump		= vxlan_fdb_dump,
 	.ndo_fdb_get		= vxlan_fdb_get,
 	.ndo_fill_metadata_dst	= vxlan_fill_metadata_dst,
-	.ndo_change_proto_down  = dev_change_proto_down_generic,
 };
 
 static const struct net_device_ops vxlan_netdev_raw_ops = {
@@ -3305,7 +3304,7 @@ static void vxlan_setup(struct net_device *dev)
 	dev->hw_features |= NETIF_F_RXCSUM;
 	dev->hw_features |= NETIF_F_GSO_SOFTWARE;
 	netif_keep_dst(dev);
-	dev->priv_flags |= IFF_NO_QUEUE;
+	dev->priv_flags |= IFF_NO_QUEUE | IFF_CHANGE_PROTO_DOWN;
 
 	/* MTU range: 68 - 65535 */
 	dev->min_mtu = ETH_MIN_MTU;

include/linux/netdevice.h

@@ -1297,11 +1297,6 @@ struct netdev_net_notifier {
  *	TX queue.
  * int (*ndo_get_iflink)(const struct net_device *dev);
  *	Called to get the iflink value of this device.
- * void (*ndo_change_proto_down)(struct net_device *dev,
- *				 bool proto_down);
- *	This function is used to pass protocol port error state information
- *	to the switch driver. The switch driver can react to the proto_down
- *      by doing a phys down on the associated switch port.
  * int (*ndo_fill_metadata_dst)(struct net_device *dev, struct sk_buff *skb);
  *	This function is used to get egress tunnel information for given skb.
  *	This is useful for retrieving outer tunnel header parameters while
@@ -1542,8 +1537,6 @@ struct net_device_ops {
 						      int queue_index,
 						      u32 maxrate);
 	int			(*ndo_get_iflink)(const struct net_device *dev);
-	int			(*ndo_change_proto_down)(struct net_device *dev,
-							 bool proto_down);
 	int			(*ndo_fill_metadata_dst)(struct net_device *dev,
 						       struct sk_buff *skb);
 	void			(*ndo_set_rx_headroom)(struct net_device *dev,
@@ -1612,6 +1605,7 @@ struct net_device_ops {
  * @IFF_LIVE_RENAME_OK: rename is allowed while device is up and running
  * @IFF_TX_SKB_NO_LINEAR: device/driver is capable of xmitting frames with
  *	skb_headlen(skb) == 0 (data starts from frag0)
+ * @IFF_CHANGE_PROTO_DOWN: device supports setting carrier via IFLA_PROTO_DOWN
  */
 enum netdev_priv_flags {
 	IFF_802_1Q_VLAN			= 1<<0,
@@ -1646,6 +1640,7 @@ enum netdev_priv_flags {
 	IFF_L3MDEV_RX_HANDLER		= 1<<29,
 	IFF_LIVE_RENAME_OK		= 1<<30,
 	IFF_TX_SKB_NO_LINEAR		= 1<<31,
+	IFF_CHANGE_PROTO_DOWN		= BIT_ULL(32),
 };
 
 #define IFF_802_1Q_VLAN			IFF_802_1Q_VLAN
@@ -1982,7 +1977,7 @@ struct net_device {
 
 	/* Read-mostly cache-line for fast-path access */
 	unsigned int		flags;
-	unsigned int		priv_flags;
+	unsigned long long	priv_flags;
 	const struct net_device_ops *netdev_ops;
 	int			ifindex;
 	unsigned short		gflags;
@@ -3735,7 +3730,6 @@ int dev_get_port_parent_id(struct net_device *dev,
 			   struct netdev_phys_item_id *ppid, bool recurse);
 bool netdev_port_same_parent_id(struct net_device *a, struct net_device *b);
 int dev_change_proto_down(struct net_device *dev, bool proto_down);
-int dev_change_proto_down_generic(struct net_device *dev, bool proto_down);
 void dev_change_proto_down_reason(struct net_device *dev, unsigned long mask,
 				  u32 value);
 struct sk_buff *validate_xmit_skb_list(struct sk_buff *skb, struct net_device *dev, bool *again);

net/8021q/vlanproc.c

@@ -252,7 +252,7 @@ static int vlandev_seq_show(struct seq_file *seq, void *offset)
 
 	stats = dev_get_stats(vlandev, &temp);
 	seq_printf(seq,
-		   "%s  VID: %d	 REORDER_HDR: %i  dev->priv_flags: %hx\n",
+		   "%s  VID: %d	 REORDER_HDR: %i  dev->priv_flags: %llx\n",
 		   vlandev->name, vlan->vlan_id,
 		   (int)(vlan->flags & 1), vlandev->priv_flags);
 

net/core/dev.c

@@ -8558,35 +8558,17 @@ bool netdev_port_same_parent_id(struct net_device *a, struct net_device *b)
 EXPORT_SYMBOL(netdev_port_same_parent_id);
 
 /**
- *	dev_change_proto_down - update protocol port state information
+ *	dev_change_proto_down - set carrier according to proto_down.
+ *
  *	@dev: device
  *	@proto_down: new value
- *
- *	This info can be used by switch drivers to set the phys state of the
- *	port.
  */
 int dev_change_proto_down(struct net_device *dev, bool proto_down)
 {
-	const struct net_device_ops *ops = dev->netdev_ops;
-
-	if (!ops->ndo_change_proto_down)
+	if (!(dev->priv_flags & IFF_CHANGE_PROTO_DOWN))
 		return -EOPNOTSUPP;
 	if (!netif_device_present(dev))
 		return -ENODEV;
-	return ops->ndo_change_proto_down(dev, proto_down);
-}
-EXPORT_SYMBOL(dev_change_proto_down);
-
-/**
- *	dev_change_proto_down_generic - generic implementation for
- * 	ndo_change_proto_down that sets carrier according to
- * 	proto_down.
- *
- *	@dev: device
- *	@proto_down: new value
- */
-int dev_change_proto_down_generic(struct net_device *dev, bool proto_down)
-{
 	if (proto_down)
 		netif_carrier_off(dev);
 	else
@@ -8594,7 +8576,7 @@ int dev_change_proto_down_generic(struct net_device *dev, bool proto_down)
 	dev->proto_down = proto_down;
 	return 0;
 }
-EXPORT_SYMBOL(dev_change_proto_down_generic);
+EXPORT_SYMBOL(dev_change_proto_down);
 
 /**
  *	dev_change_proto_down_reason - proto down reason

net/core/net-sysfs.c

@@ -488,14 +488,6 @@ static ssize_t proto_down_store(struct device *dev,
 				struct device_attribute *attr,
 				const char *buf, size_t len)
 {
-	struct net_device *netdev = to_net_dev(dev);
-
-	/* The check is also done in change_proto_down; this helps returning
-	 * early without hitting the trylock/restart in netdev_store.
-	 */
-	if (!netdev->netdev_ops->ndo_change_proto_down)
-		return -EOPNOTSUPP;
-
 	return netdev_store(dev, attr, buf, len, change_proto_down);
 }
 NETDEVICE_SHOW_RW(proto_down, fmt_dec);

net/core/rtnetlink.c

@@ -2539,13 +2539,12 @@ static int do_set_proto_down(struct net_device *dev,
 			     struct netlink_ext_ack *extack)
 {
 	struct nlattr *pdreason[IFLA_PROTO_DOWN_REASON_MAX + 1];
-	const struct net_device_ops *ops = dev->netdev_ops;
 	unsigned long mask = 0;
 	u32 value;
 	bool proto_down;
 	int err;
 
-	if (!ops->ndo_change_proto_down) {
+	if (!(dev->priv_flags & IFF_CHANGE_PROTO_DOWN)) {
 		NL_SET_ERR_MSG(extack,  "Protodown not supported by device");
 		return -EOPNOTSUPP;
 	}