Merge tag 'at91-dt-6.8' of https://git.kernel.org/pub/scm/linux/kernel/git/at91/linux into soc/dt

Microchip AT91 device tree updates for v6.8

It contains:
- IRQ support for Ethernet PHYs on SAM9X60-EK and SAM9X60-Curiosity
  boards
- removal of the mmc-ddr-3_3v property from SD controllers connected to SD
  slots, for SAMA5D27-WLSOM1-EK and SAMA5D27-SOM1-EK boards, as this
  property is for eMMC devices

* tag 'at91-dt-6.8' of https://git.kernel.org/pub/scm/linux/kernel/git/at91/linux:
  ARM: dts: microchip: sama5d27_som1_ek: Remove mmc-ddr-3_3v property from sdmmc0 node
  ARM: dts: microchip: sama5d27_wlsom1_ek: Remove mmc-ddr-3_3v property from sdmmc0 node
  ARM: dts: microchip: sam9x60ek: Add IRQ support for ethernet PHY
  ARM: dts: microchip: sam9x60_curiosity: Add IRQ support for ethernet PHY

Link: https://lore.kernel.org/r/20231214174954.3045355-1-claudiu.beznea@tuxon.devSigned-off-by: Arnd Bergmann <arnd@arndb.de>

arch/arm/boot/dts/microchip/at91-sam9x60_curiosity.dts

@@ -249,6 +249,8 @@ &macb0 {
 
 	ethernet-phy@0 {
 		reg = <0x0>;
+		interrupt-parent = <&pioB>;
+		interrupts = <8 IRQ_TYPE_LEVEL_LOW>;
 	};
 };
 
@@ -353,6 +355,7 @@ AT91_PIOB 4 AT91_PERIPH_A AT91_PINCTRL_NONE	/* PB4 periph A */
 				 AT91_PIOB 5 AT91_PERIPH_A AT91_PINCTRL_NONE	/* PB5 periph A */
 				 AT91_PIOB 6 AT91_PERIPH_A AT91_PINCTRL_NONE	/* PB6 periph A */
 				 AT91_PIOB 7 AT91_PERIPH_A AT91_PINCTRL_NONE	/* PB7 periph A */
+				 AT91_PIOB 8 AT91_PERIPH_GPIO AT91_PINCTRL_NONE	/* PB8 IRQ GPIO */
 				 AT91_PIOB 9 AT91_PERIPH_A AT91_PINCTRL_NONE	/* PB9 periph A */
 				 AT91_PIOB 10 AT91_PERIPH_A AT91_PINCTRL_NONE>;	/* PB10 periph A */
 		};

arch/arm/boot/dts/microchip/at91-sam9x60ek.dts

@@ -292,6 +292,8 @@ &macb0 {
 
 	ethernet-phy@0 {
 		reg = <0x0>;
+		interrupt-parent = <&pioB>;
+		interrupts = <8 IRQ_TYPE_LEVEL_LOW>;
 	};
 };
 
@@ -465,6 +467,7 @@ AT91_PIOB 4 AT91_PERIPH_A AT91_PINCTRL_NONE	/* PB4 periph A */
 				 AT91_PIOB 5 AT91_PERIPH_A AT91_PINCTRL_NONE	/* PB5 periph A */
 				 AT91_PIOB 6 AT91_PERIPH_A AT91_PINCTRL_NONE	/* PB6 periph A */
 				 AT91_PIOB 7 AT91_PERIPH_A AT91_PINCTRL_NONE	/* PB7 periph A */
+				 AT91_PIOB 8 AT91_PERIPH_GPIO AT91_PINCTRL_NONE	/* PB8 IRQ GPIO */
 				 AT91_PIOB 9 AT91_PERIPH_A AT91_PINCTRL_NONE	/* PB9 periph A */
 				 AT91_PIOB 10 AT91_PERIPH_A AT91_PINCTRL_NONE>;	/* PB10 periph A */
 		};

arch/arm/boot/dts/microchip/at91-sama5d27_som1_ek.dts

@@ -54,7 +54,6 @@ usb2: ehci@500000 {
 
 		sdmmc0: sdio-host@a0000000 {
 			bus-width = <8>;
-			mmc-ddr-3_3v;
 			pinctrl-names = "default";
 			pinctrl-0 = <&pinctrl_sdmmc0_default>;
 			status = "okay";

arch/arm/boot/dts/microchip/at91-sama5d27_wlsom1_ek.dts

@@ -197,7 +197,6 @@ qspi1_flash: flash@0 {
 
 &sdmmc0 {
 	bus-width = <4>;
-	mmc-ddr-3_3v;
 	pinctrl-names = "default";
 	pinctrl-0 = <&pinctrl_sdmmc0_default>;
 	status = "okay";