r8169: add support for pause ethtool ops

This adds support for the [g|s]et_pauseparam ethtool ops. It considers
that the chip doesn't support pause frame use in jumbo mode.
Signed-off-by: Heiner Kallweit <hkallweit1@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

drivers/net/ethernet/realtek/r8169_main.c

@@ -1910,6 +1910,32 @@ static void rtl8169_get_ringparam(struct net_device *dev,
 	data->tx_pending = NUM_TX_DESC;
 }
 
+static void rtl8169_get_pauseparam(struct net_device *dev,
+				   struct ethtool_pauseparam *data)
+{
+	struct rtl8169_private *tp = netdev_priv(dev);
+	bool tx_pause, rx_pause;
+
+	phy_get_pause(tp->phydev, &tx_pause, &rx_pause);
+
+	data->autoneg = tp->phydev->autoneg;
+	data->tx_pause = tx_pause ? 1 : 0;
+	data->rx_pause = rx_pause ? 1 : 0;
+}
+
+static int rtl8169_set_pauseparam(struct net_device *dev,
+				  struct ethtool_pauseparam *data)
+{
+	struct rtl8169_private *tp = netdev_priv(dev);
+
+	if (dev->mtu > ETH_DATA_LEN)
+		return -EOPNOTSUPP;
+
+	phy_set_asym_pause(tp->phydev, data->rx_pause, data->tx_pause);
+
+	return 0;
+}
+
 static const struct ethtool_ops rtl8169_ethtool_ops = {
 	.supported_coalesce_params = ETHTOOL_COALESCE_USECS |
 				     ETHTOOL_COALESCE_MAX_FRAMES,
@@ -1931,6 +1957,8 @@ static const struct ethtool_ops rtl8169_ethtool_ops = {
 	.get_link_ksettings	= phy_ethtool_get_link_ksettings,
 	.set_link_ksettings	= phy_ethtool_set_link_ksettings,
 	.get_ringparam		= rtl8169_get_ringparam,
+	.get_pauseparam		= rtl8169_get_pauseparam,
+	.set_pauseparam		= rtl8169_set_pauseparam,
 };
 
 static void rtl_enable_eee(struct rtl8169_private *tp)