Commit 21f5998f authored by Fabio Estevam's avatar Fabio Estevam Committed by Chris Ball

mmc: sdhci: Fix parameter of sdhci_do_start_signal_voltage_switch()

3714f4315354 ("mmc: sdhci: update signal voltage switch code") changed the
type of the second parameter of sdhci_do_start_signal_voltage_switch(),
from "struct mmc_ios *ios" to "int signal_voltage" which causes the
following build warning:

drivers/mmc/host/sdhci.c:2044:2: warning: initialization from incompatible pointer type [enabled by default]
drivers/mmc/host/sdhci.c:2044:2: warning: (near initialization for 'sdhci_ops.start_signal_voltage_switch') [enabled by default]

Use the previous type so that it matches the start_signal_voltage_switch()
definition from host.h.
Signed-off-by: default avatarFabio Estevam <fabio.estevam@freescale.com>
Reviewed-by: default avatarJohan Rudholm <johan.rudholm@stericsson.com>
Signed-off-by: default avatarChris Ball <cjb@laptop.org>
parent a4f8f257
......@@ -1675,7 +1675,7 @@ static void sdhci_enable_sdio_irq(struct mmc_host *mmc, int enable)
}
static int sdhci_do_start_signal_voltage_switch(struct sdhci_host *host,
int signal_voltage)
struct mmc_ios *ios)
{
u16 ctrl;
int ret;
......@@ -1689,7 +1689,7 @@ static int sdhci_do_start_signal_voltage_switch(struct sdhci_host *host,
ctrl = sdhci_readw(host, SDHCI_HOST_CONTROL2);
switch (signal_voltage) {
switch (ios->signal_voltage) {
case MMC_SIGNAL_VOLTAGE_330:
/* Set 1.8V Signal Enable in the Host Control2 register to 0 */
ctrl &= ~SDHCI_CTRL_VDD_180;
......@@ -1762,7 +1762,7 @@ static int sdhci_do_start_signal_voltage_switch(struct sdhci_host *host,
}
static int sdhci_start_signal_voltage_switch(struct mmc_host *mmc,
int signal_voltage)
struct mmc_ios *ios)
{
struct sdhci_host *host = mmc_priv(mmc);
int err;
......@@ -1770,7 +1770,7 @@ static int sdhci_start_signal_voltage_switch(struct mmc_host *mmc,
if (host->version < SDHCI_SPEC_300)
return 0;
sdhci_runtime_pm_get(host);
err = sdhci_do_start_signal_voltage_switch(host, signal_voltage);
err = sdhci_do_start_signal_voltage_switch(host, ios);
sdhci_runtime_pm_put(host);
return err;
}
......
Markdown is supported
0%
or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment