Commit 220e6cf7 authored by Rob Herring's avatar Rob Herring Committed by Arnd Bergmann

ARM: add Highbank core platform support

This adds basic support for the Calxeda Highbank platform.
Signed-off-by: default avatarRob Herring <rob.herring@calxeda.com>
Reviewed-by: default avatarJamie Iles <jamie@jamieiles.com>
Reviewed-by: default avatarShawn Guo <shawn.guo@linaro.org>
parent 253d7add
......@@ -330,6 +330,20 @@ config ARCH_BCMRING
help
Support for Broadcom's BCMRing platform.
config ARCH_HIGHBANK
bool "Calxeda Highbank-based"
select ARCH_WANT_OPTIONAL_GPIOLIB
select ARM_AMBA
select ARM_GIC
select ARM_TIMER_SP804
select CLKDEV_LOOKUP
select CPU_V7
select GENERIC_CLOCKEVENTS
select HAVE_ARM_SCU
select USE_OF
help
Support for the Calxeda Highbank SoC based boards.
config ARCH_CLPS711X
bool "Cirrus Logic CLPS711x/EP721x-based"
select CPU_ARM720T
......
......@@ -128,6 +128,13 @@ choice
Say Y here if you want the debug print routines to direct
their output to the second serial port on these devices.
config DEBUG_HIGHBANK_UART
bool "Kernel low-level debugging messages via Highbank UART"
depends on ARCH_HIGHBANK
help
Say Y here if you want the debug print routines to direct
their output to the UART on Highbank based devices.
endchoice
config EARLY_PRINTK
......
......@@ -144,6 +144,7 @@ machine-$(CONFIG_ARCH_EBSA110) := ebsa110
machine-$(CONFIG_ARCH_EP93XX) := ep93xx
machine-$(CONFIG_ARCH_GEMINI) := gemini
machine-$(CONFIG_ARCH_H720X) := h720x
machine-$(CONFIG_ARCH_HIGHBANK) := highbank
machine-$(CONFIG_ARCH_INTEGRATOR) := integrator
machine-$(CONFIG_ARCH_IOP13XX) := iop13xx
machine-$(CONFIG_ARCH_IOP32X) := iop32x
......
obj-y := clock.o highbank.o system.o
obj-$(CONFIG_DEBUG_HIGHBANK_UART) += lluart.o
/*
* Copyright 2011 Calxeda, Inc.
*
* This program is free software; you can redistribute it and/or modify it
* under the terms and conditions of the GNU General Public License,
* version 2, as published by the Free Software Foundation.
*
* This program is distributed in the hope it will be useful, but WITHOUT
* ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
* FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for
* more details.
*
* You should have received a copy of the GNU General Public License along with
* this program. If not, see <http://www.gnu.org/licenses/>.
*/
#include <linux/module.h>
#include <linux/kernel.h>
#include <linux/errno.h>
#include <linux/clk.h>
#include <linux/clkdev.h>
struct clk {
unsigned long rate;
};
int clk_enable(struct clk *clk)
{
return 0;
}
void clk_disable(struct clk *clk)
{}
unsigned long clk_get_rate(struct clk *clk)
{
return clk->rate;
}
long clk_round_rate(struct clk *clk, unsigned long rate)
{
return clk->rate;
}
int clk_set_rate(struct clk *clk, unsigned long rate)
{
return 0;
}
static struct clk eclk = { .rate = 200000000 };
static struct clk pclk = { .rate = 150000000 };
static struct clk_lookup lookups[] = {
{ .clk = &pclk, .con_id = "apb_pclk", },
{ .clk = &pclk, .dev_id = "sp804", },
{ .clk = &eclk, .dev_id = "ffe0e000.sdhci", },
{ .clk = &pclk, .dev_id = "fff36000.serial", },
};
void __init highbank_clocks_init(void)
{
clkdev_add_table(lookups, ARRAY_SIZE(lookups));
}
extern void highbank_set_cpu_jump(int cpu, void *jump_addr);
extern void highbank_clocks_init(void);
extern void __iomem *scu_base_addr;
#ifdef CONFIG_DEBUG_HIGHBANK_UART
extern void highbank_lluart_map_io(void);
#else
static inline void highbank_lluart_map_io(void) {}
#endif
/*
* Copyright 2010-2011 Calxeda, Inc.
*
* This program is free software; you can redistribute it and/or modify it
* under the terms and conditions of the GNU General Public License,
* version 2, as published by the Free Software Foundation.
*
* This program is distributed in the hope it will be useful, but WITHOUT
* ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
* FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for
* more details.
*
* You should have received a copy of the GNU General Public License along with
* this program. If not, see <http://www.gnu.org/licenses/>.
*/
#include <linux/clk.h>
#include <linux/clkdev.h>
#include <linux/io.h>
#include <linux/irq.h>
#include <linux/irqdomain.h>
#include <linux/of.h>
#include <linux/of_irq.h>
#include <linux/of_platform.h>
#include <linux/of_address.h>
#include <asm/cacheflush.h>
#include <asm/unified.h>
#include <asm/smp_scu.h>
#include <asm/hardware/arm_timer.h>
#include <asm/hardware/timer-sp.h>
#include <asm/hardware/gic.h>
#include <asm/hardware/cache-l2x0.h>
#include <asm/mach/arch.h>
#include <asm/mach/map.h>
#include <asm/mach/time.h>
#include <mach/irqs.h>
#include "core.h"
#include "sysregs.h"
void __iomem *sregs_base;
#define HB_SCU_VIRT_BASE 0xfee00000
void __iomem *scu_base_addr = ((void __iomem *)(HB_SCU_VIRT_BASE));
static struct map_desc scu_io_desc __initdata = {
.virtual = HB_SCU_VIRT_BASE,
.pfn = 0, /* run-time */
.length = SZ_4K,
.type = MT_DEVICE,
};
static void __init highbank_scu_map_io(void)
{
unsigned long base;
/* Get SCU base */
asm("mrc p15, 4, %0, c15, c0, 0" : "=r" (base));
scu_io_desc.pfn = __phys_to_pfn(base);
iotable_init(&scu_io_desc, 1);
}
static void __init highbank_map_io(void)
{
highbank_scu_map_io();
highbank_lluart_map_io();
}
#define HB_JUMP_TABLE_PHYS(cpu) (0x40 + (0x10 * (cpu)))
#define HB_JUMP_TABLE_VIRT(cpu) phys_to_virt(HB_JUMP_TABLE_PHYS(cpu))
void highbank_set_cpu_jump(int cpu, void *jump_addr)
{
writel(BSYM(virt_to_phys(jump_addr)), HB_JUMP_TABLE_VIRT(cpu));
__cpuc_flush_dcache_area(HB_JUMP_TABLE_VIRT(cpu), 16);
outer_clean_range(HB_JUMP_TABLE_PHYS(cpu),
HB_JUMP_TABLE_PHYS(cpu) + 15);
}
const static struct of_device_id irq_match[] = {
{ .compatible = "arm,cortex-a9-gic", .data = gic_of_init, },
{}
};
static void __init highbank_init_irq(void)
{
of_irq_init(irq_match);
l2x0_of_init(0, ~0UL);
}
static void __init highbank_timer_init(void)
{
int irq;
struct device_node *np;
void __iomem *timer_base;
/* Map system registers */
np = of_find_compatible_node(NULL, NULL, "calxeda,hb-sregs");
sregs_base = of_iomap(np, 0);
WARN_ON(!sregs_base);
np = of_find_compatible_node(NULL, NULL, "arm,sp804");
timer_base = of_iomap(np, 0);
WARN_ON(!timer_base);
irq = irq_of_parse_and_map(np, 0);
highbank_clocks_init();
sp804_clocksource_init(timer_base + 0x20, "timer1");
sp804_clockevents_init(timer_base, irq, "timer0");
}
static struct sys_timer highbank_timer = {
.init = highbank_timer_init,
};
static void highbank_power_off(void)
{
hignbank_set_pwr_shutdown();
scu_power_mode(scu_base_addr, SCU_PM_POWEROFF);
while (1)
cpu_do_idle();
}
static void __init highbank_init(void)
{
pm_power_off = highbank_power_off;
of_platform_populate(NULL, of_default_bus_match_table, NULL, NULL);
}
static const char *highbank_match[] __initconst = {
"calxeda,highbank",
NULL,
};
DT_MACHINE_START(HIGHBANK, "Highbank")
.map_io = highbank_map_io,
.init_irq = highbank_init_irq,
.timer = &highbank_timer,
.init_machine = highbank_init,
.dt_compat = highbank_match,
MACHINE_END
/*
* Debugging macro include header
*
* Copyright (C) 1994-1999 Russell King
* Moved from linux/arch/arm/kernel/debug.S by Ben Dooks
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License version 2 as
* published by the Free Software Foundation.
*/
.macro addruart,rp,rv,tmp
movw \rv, #0x6000
movt \rv, #0xfee3
movw \rp, #0x6000
movt \rp, #0xfff3
.endm
#include <asm/hardware/debug-pl01x.S>
#include <asm/hardware/entry-macro-gic.S>
.macro disable_fiq
.endm
.macro arch_ret_to_user, tmp1, tmp2
.endm
#ifndef __MACH_IO_H
#define __MACH_IO_H
#define __io(a) ({ (void)(a); __typesafe_io(0); })
#define __mem_pci(a) (a)
#endif
#ifndef __MACH_IRQS_H
#define __MACH_IRQS_H
#define NR_IRQS 192
#endif
/*
* Copyright 2010-2011 Calxeda, Inc.
*
* This program is free software; you can redistribute it and/or modify it
* under the terms and conditions of the GNU General Public License,
* version 2, as published by the Free Software Foundation.
*
* This program is distributed in the hope it will be useful, but WITHOUT
* ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
* FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for
* more details.
*
* You should have received a copy of the GNU General Public License along with
* this program. If not, see <http://www.gnu.org/licenses/>.
*/
#ifndef __MACH_SYSTEM_H
#define __MACH_SYSTEM_H
static inline void arch_idle(void)
{
cpu_do_idle();
}
extern void arch_reset(char mode, const char *cmd);
#endif
#ifndef __MACH_TIMEX_H
#define __MACH_TIMEX_H
#define CLOCK_TICK_RATE 1000000
#endif
#ifndef __MACH_UNCOMPRESS_H
#define __MACH_UNCOMPRESS_H
#define putc(c)
#define flush()
#define arch_decomp_setup()
#define arch_decomp_wdog()
#endif
#define VMALLOC_END 0xFEE00000UL
/*
* Copyright 2011 Calxeda, Inc.
*
* This program is free software; you can redistribute it and/or modify it
* under the terms and conditions of the GNU General Public License,
* version 2, as published by the Free Software Foundation.
*
* This program is distributed in the hope it will be useful, but WITHOUT
* ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
* FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for
* more details.
*
* You should have received a copy of the GNU General Public License along with
* this program. If not, see <http://www.gnu.org/licenses/>.
*/
#include <linux/init.h>
#include <asm/page.h>
#include <asm/sizes.h>
#include <asm/mach/map.h>
#define HB_DEBUG_LL_PHYS_BASE 0xfff36000
#define HB_DEBUG_LL_VIRT_BASE 0xfee36000
static struct map_desc lluart_io_desc __initdata = {
.virtual = HB_DEBUG_LL_VIRT_BASE,
.pfn = __phys_to_pfn(HB_DEBUG_LL_PHYS_BASE),
.length = SZ_4K,
.type = MT_DEVICE,
};
void __init highbank_lluart_map_io(void)
{
iotable_init(&lluart_io_desc, 1);
}
/*
* Copyright 2011 Calxeda, Inc.
*
* This program is free software; you can redistribute it and/or modify it
* under the terms and conditions of the GNU General Public License,
* version 2, as published by the Free Software Foundation.
*
* This program is distributed in the hope it will be useful, but WITHOUT
* ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
* FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for
* more details.
*
* You should have received a copy of the GNU General Public License along with
* this program. If not, see <http://www.gnu.org/licenses/>.
*/
#ifndef _MACH_HIGHBANK__SYSREGS_H_
#define _MACH_HIGHBANK__SYSREGS_H_
#include <linux/io.h>
extern void __iomem *sregs_base;
#define HB_SREG_A9_PWR_REQ 0xf00
#define HB_SREG_A9_BOOT_STAT 0xf04
#define HB_SREG_A9_BOOT_DATA 0xf08
#define HB_PWR_SUSPEND 0
#define HB_PWR_SOFT_RESET 1
#define HB_PWR_HARD_RESET 2
#define HB_PWR_SHUTDOWN 3
static inline void hignbank_set_pwr_suspend(void)
{
writel(HB_PWR_SUSPEND, sregs_base + HB_SREG_A9_PWR_REQ);
}
static inline void hignbank_set_pwr_shutdown(void)
{
writel(HB_PWR_SHUTDOWN, sregs_base + HB_SREG_A9_PWR_REQ);
}
static inline void hignbank_set_pwr_soft_reset(void)
{
writel(HB_PWR_SOFT_RESET, sregs_base + HB_SREG_A9_PWR_REQ);
}
static inline void hignbank_set_pwr_hard_reset(void)
{
writel(HB_PWR_HARD_RESET, sregs_base + HB_SREG_A9_PWR_REQ);
}
#endif
/*
* Copyright 2011 Calxeda, Inc.
*
* This program is free software; you can redistribute it and/or modify it
* under the terms and conditions of the GNU General Public License,
* version 2, as published by the Free Software Foundation.
*
* This program is distributed in the hope it will be useful, but WITHOUT
* ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
* FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for
* more details.
*
* You should have received a copy of the GNU General Public License along with
* this program. If not, see <http://www.gnu.org/licenses/>.
*/
#include <linux/io.h>
#include <asm/smp_scu.h>
#include <asm/proc-fns.h>
#include "core.h"
#include "sysregs.h"
void arch_reset(char mode, const char *cmd)
{
if (mode == 'h')
hignbank_set_pwr_hard_reset();
else
hignbank_set_pwr_soft_reset();
scu_power_mode(scu_base_addr, SCU_PM_POWEROFF);
cpu_do_idle();
}
......@@ -822,7 +822,7 @@ config CACHE_L2X0
REALVIEW_EB_A9MP || SOC_IMX35 || SOC_IMX31 || MACH_REALVIEW_PBX || \
ARCH_NOMADIK || ARCH_OMAP4 || ARCH_EXYNOS4 || ARCH_TEGRA || \
ARCH_U8500 || ARCH_VEXPRESS_CA9X4 || ARCH_SHMOBILE || \
ARCH_PRIMA2 || ARCH_ZYNQ || ARCH_CNS3XXX
ARCH_PRIMA2 || ARCH_ZYNQ || ARCH_CNS3XXX || ARCH_HIGHBANK
default y
select OUTER_CACHE
select OUTER_CACHE_SYNC
......
Markdown is supported
0%
or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment