Commit 22650045 authored by Lad Prabhakar's avatar Lad Prabhakar Committed by Geert Uytterhoeven

ARM: dts: r8a7742-iwg21d-q7-dbcm-ca: Add support for 8-bit ov7725 sensors

The 8-bit ov7725 sensors can also be connected to the camera daughter
board.

This patch creates a separate dtsi file to describe an ov7725 sensor,
and includes it multiple times in r8a7742-iwg21d-q7-dbcm-ca.dts. The
user can (un)comment #include statements depending on the cameras
connected.
Signed-off-by: default avatarLad Prabhakar <prabhakar.mahadev-lad.rj@bp.renesas.com>
Reviewed-by: default avatarBiju Das <biju.das.jz@bp.renesas.com>
[geert: describe a single camera in the .dtsi, include multiple times]
Signed-off-by: default avatarGeert Uytterhoeven <geert+renesas@glider.be>
Reviewed-by: default avatarLad Prabhakar <prabhakar.mahadev-lad.rj@bp.renesas.com>
Link: https://lore.kernel.org/r/20210122113424.2833127-3-geert+renesas@glider.be
parent 97ed7c0a
......@@ -198,7 +198,7 @@ &scifb1 {
/*
* Below configuration ties VINx endpoints to ov5640/ov7725 camera endpoints
*
* Uncomment the #include statements to change configuration
* (un)comment the #include statements to change configuration
*/
/* 8bit CMOS Camera 1 (J13) */
......@@ -208,6 +208,7 @@ &scifb1 {
#define VIN_EP vin0ep
#undef CAM_ENABLED
#include "r8a7742-iwg21d-q7-dbcm-ov5640-single.dtsi"
//#include "r8a7742-iwg21d-q7-dbcm-ov7725-single.dtsi"
#ifdef CAM_ENABLED
&vin0 {
......@@ -241,6 +242,7 @@ vin0ep: endpoint {
#define VIN_EP vin1ep
#undef CAM_ENABLED
#include "r8a7742-iwg21d-q7-dbcm-ov5640-single.dtsi"
//#include "r8a7742-iwg21d-q7-dbcm-ov7725-single.dtsi"
#ifdef CAM_ENABLED
&vin1 {
......@@ -272,6 +274,7 @@ vin1ep: endpoint {
#define VIN_EP vin2ep
#undef CAM_ENABLED
#include "r8a7742-iwg21d-q7-dbcm-ov5640-single.dtsi"
//#include "r8a7742-iwg21d-q7-dbcm-ov7725-single.dtsi"
#ifdef CAM_ENABLED
&vin2 {
......@@ -302,6 +305,7 @@ vin2ep: endpoint {
#define VIN_EP vin3ep
#undef CAM_ENABLED
#include "r8a7742-iwg21d-q7-dbcm-ov5640-single.dtsi"
//#include "r8a7742-iwg21d-q7-dbcm-ov7725-single.dtsi"
#ifdef CAM_ENABLED
&vin3 {
......
// SPDX-License-Identifier: GPL-2.0
/*
* This include file ties a VIN interface with a single ov7725 sensor on
* the iWave-RZ/G1H Qseven board development platform connected with the
* camera daughter board.
*
* Copyright (C) 2020 Renesas Electronics Corp.
*/
#define CAM_ENABLED 1
&CAM_PARENT_I2C {
status = "okay";
ov7725@21 {
compatible = "ovti,ov7725";
reg = <0x21>;
clocks = <&MCLK_CAM>;
status = "okay";
port {
CAM_EP: endpoint {
bus-width = <8>;
bus-type = <6>;
remote-endpoint = <&VIN_EP>;
};
};
};
};
Markdown is supported
0%
or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment