rtc: ds1307: Make use of device properties

Device property API allows to gather device resources from different sources,
such as ACPI. Convert the drivers to unleash the power of device property API.
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Reviewed-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com>
Link: https://lore.kernel.org/r/20201116142859.31257-2-andriy.shevchenko@linux.intel.com

drivers/rtc/rtc-ds1307.c

@@ -12,7 +12,8 @@
 #include <linux/i2c.h>
 #include <linux/init.h>
 #include <linux/module.h>
-#include <linux/of_device.h>
+#include <linux/of.h>
+#include <linux/property.h>
 #include <linux/rtc/ds1307.h>
 #include <linux/rtc.h>
 #include <linux/slab.h>
@@ -30,6 +31,7 @@
  * That's a natural job for a factory or repair bench.
  */
 enum ds_type {
+	unknown_ds_type, /* always first and 0 */
 	ds_1307,
 	ds_1308,
 	ds_1337,
@@ -1600,13 +1602,16 @@ static const struct clk_ops ds3231_clk_32khz_ops = {
 	.recalc_rate = ds3231_clk_32khz_recalc_rate,
 };
 
+static const char *ds3231_clks_names[] = {
+	[DS3231_CLK_SQW] = "ds3231_clk_sqw",
+	[DS3231_CLK_32KHZ] = "ds3231_clk_32khz",
+};
+
 static struct clk_init_data ds3231_clks_init[] = {
 	[DS3231_CLK_SQW] = {
-		.name = "ds3231_clk_sqw",
 		.ops = &ds3231_clk_sqw_ops,
 	},
 	[DS3231_CLK_32KHZ] = {
-		.name = "ds3231_clk_32khz",
 		.ops = &ds3231_clk_32khz_ops,
 	},
 };
@@ -1627,6 +1632,11 @@ static int ds3231_clks_register(struct ds1307 *ds1307)
 	if (!onecell->clks)
 		return -ENOMEM;
 
+	/* optional override of the clockname */
+	device_property_read_string_array(ds1307->dev, "clock-output-names",
+					  ds3231_clks_names,
+					  ARRAY_SIZE(ds3231_clks_names));
+
 	for (i = 0; i < ARRAY_SIZE(ds3231_clks_init); i++) {
 		struct clk_init_data init = ds3231_clks_init[i];
 
@@ -1637,9 +1647,7 @@ static int ds3231_clks_register(struct ds1307 *ds1307)
 		if (i == DS3231_CLK_SQW && test_bit(HAS_ALARM, &ds1307->flags))
 			continue;
 
-		/* optional override of the clockname */
-		of_property_read_string_index(node, "clock-output-names", i,
-					      &init.name);
+		init.name = ds3231_clks_names[i];
 		ds1307->clks[i].init = &init;
 
 		onecell->clks[i] = devm_clk_register(ds1307->dev,
@@ -1648,10 +1656,8 @@ static int ds3231_clks_register(struct ds1307 *ds1307)
 			return PTR_ERR(onecell->clks[i]);
 	}
 
-	if (!node)
-		return 0;
-
-	of_clk_add_provider(node, of_clk_src_onecell_get, onecell);
+	if (node)
+		of_clk_add_provider(node, of_clk_src_onecell_get, onecell);
 
 	return 0;
 }
@@ -1735,6 +1741,7 @@ static int ds1307_probe(struct i2c_client *client,
 			const struct i2c_device_id *id)
 {
 	struct ds1307		*ds1307;
+	const void		*match;
 	int			err = -ENODEV;
 	int			tmp;
 	const struct chip_desc	*chip;
@@ -1760,9 +1767,9 @@ static int ds1307_probe(struct i2c_client *client,
 
 	i2c_set_clientdata(client, ds1307);
 
-	if (client->dev.of_node) {
-		ds1307->type = (enum ds_type)
-			of_device_get_match_data(&client->dev);
+	match = device_get_match_data(&client->dev);
+	if (match) {
+		ds1307->type = (enum ds_type)match;
 		chip = &chips[ds1307->type];
 	} else if (id) {
 		chip = &chips[id->driver_data];
@@ -1786,7 +1793,6 @@ static int ds1307_probe(struct i2c_client *client,
 			     trickle_charger_setup);
 	}
 
-#ifdef CONFIG_OF
 /*
  * For devices with no IRQ directly connected to the SoC, the RTC chip
  * can be forced as a wakeup source by stating that explicitly in
@@ -1795,10 +1801,8 @@ static int ds1307_probe(struct i2c_client *client,
  * This will guarantee the 'wakealarm' sysfs entry is available on the device,
  * if supported by the RTC.
  */
-	if (chip->alarm && of_property_read_bool(client->dev.of_node,
-						 "wakeup-source"))
+	if (chip->alarm && device_property_read_bool(&client->dev, "wakeup-source"))
 		ds1307_can_wakeup_device = true;
-#endif
 
 	switch (ds1307->type) {
 	case ds_1337: