Commit 229f3292 authored by Kishon Vijay Abraham I's avatar Kishon Vijay Abraham I Committed by Ulf Hansson

mmc: host: omap_hsmmc: return error if any of the regulator APIs fail

Return error if any of the regulator APIs (regulator_enable,
regulator_disable, regulator_set_voltage) fails in
omap_hsmmc_set_power to avoid undefined behavior.
Signed-off-by: default avatarKishon Vijay Abraham I <kishon@ti.com>
Tested-by: default avatarTony Lindgren <tony@atomide.com>
Signed-off-by: default avatarUlf Hansson <ulf.hansson@linaro.org>
parent ef62b8bc
......@@ -269,8 +269,11 @@ static int omap_hsmmc_set_power(struct device *dev, int power_on, int vdd)
if (host->pbias) {
if (host->pbias_enabled == 1) {
ret = regulator_disable(host->pbias);
if (!ret)
host->pbias_enabled = 0;
if (ret) {
dev_err(dev, "pbias reg disable failed\n");
return ret;
}
host->pbias_enabled = 0;
}
}
......@@ -288,23 +291,35 @@ static int omap_hsmmc_set_power(struct device *dev, int power_on, int vdd)
* chips/cards need an interface voltage rail too.
*/
if (power_on) {
if (mmc->supply.vmmc)
if (mmc->supply.vmmc) {
ret = mmc_regulator_set_ocr(mmc, mmc->supply.vmmc, vdd);
if (ret)
return ret;
}
/* Enable interface voltage rail, if needed */
if (ret == 0 && mmc->supply.vqmmc) {
if (mmc->supply.vqmmc) {
ret = regulator_enable(mmc->supply.vqmmc);
if (ret < 0 && mmc->supply.vmmc)
ret = mmc_regulator_set_ocr(mmc,
mmc->supply.vmmc,
0);
if (ret) {
dev_err(dev, "vmmc_aux reg enable failed\n");
goto err_set_vqmmc;
}
}
} else {
/* Shut down the rail */
if (mmc->supply.vqmmc)
if (mmc->supply.vqmmc) {
ret = regulator_disable(mmc->supply.vqmmc);
if (ret) {
dev_err(dev, "vmmc_aux reg disable failed\n");
return ret;
}
}
if (mmc->supply.vmmc) {
/* Then proceed to shut down the local regulator */
ret = mmc_regulator_set_ocr(mmc, mmc->supply.vmmc, 0);
if (ret)
return ret;
}
}
......@@ -316,19 +331,32 @@ static int omap_hsmmc_set_power(struct device *dev, int power_on, int vdd)
ret = regulator_set_voltage(host->pbias, VDD_3V0,
VDD_3V0);
if (ret < 0)
goto error_set_power;
goto err_set_voltage;
if (host->pbias_enabled == 0) {
ret = regulator_enable(host->pbias);
if (!ret)
if (ret) {
dev_err(dev, "pbias reg enable failed\n");
goto err_set_voltage;
} else {
host->pbias_enabled = 1;
}
}
}
if (mmc_pdata(host)->after_set_reg)
mmc_pdata(host)->after_set_reg(dev, power_on, vdd);
error_set_power:
return 0;
err_set_voltage:
if (mmc->supply.vqmmc)
regulator_disable(mmc->supply.vqmmc);
err_set_vqmmc:
if (mmc->supply.vmmc)
mmc_regulator_set_ocr(mmc, mmc->supply.vmmc, 0);
return ret;
}
......
Markdown is supported
0%
or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment