LED/MIPS: Move SEAD3 LED driver to where it belongs.

Fixes the following randconfig problem

leds-sead3.c:(.text+0x7dc): undefined reference to `led_classdev_unregister'
leds-sead3.c:(.text+0x7e8): undefined reference to `led_classdev_unregister'
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
Cc: Bryan Wu <cooloney@gmail.com>
Cc: Richard Purdie <rpurdie@rpsys.net>
Cc: Markos Chandras <markos.chandras@imgtec.com>
Cc: linux-leds@vger.kernel.org
Cc: linux-mips@linux-mips.org
Signed-off-by: Jacek Anaszewski <j.anaszewski@samsung.com>

arch/mips/mti-sead3/Makefile

@@ -12,6 +12,4 @@ obj-y				:= sead3-lcd.o sead3-display.o sead3-init.o \
 				   sead3-int.o sead3-platform.o sead3-reset.o \
 				   sead3-setup.o sead3-time.o
 
-obj-y				+= leds-sead3.o
-
 obj-$(CONFIG_EARLY_PRINTK)	+= sead3-console.o

drivers/leds/Kconfig

@@ -556,6 +556,16 @@ config LEDS_KTD2692
 
 	  Say Y to enable this driver.
 
+config LEDS_SEAD3
+	tristate "LED support for the MIPS SEAD 3 board"
+	depends on LEDS_CLASS && MIPS_SEAD3
+	help
+	  Say Y here to include support for the FLED and PLED LEDs on SEAD3 eval
+	  boards.
+
+	  This driver can also be built as a module. If so the module
+	  will be called leds-sead3.
+
 comment "LED driver for blink(1) USB RGB LED is under Special HID drivers (HID_THINGM)"
 
 config LEDS_BLINKM

drivers/leds/Makefile

@@ -65,6 +65,7 @@ obj-$(CONFIG_LEDS_VERSATILE)		+= leds-versatile.o
 obj-$(CONFIG_LEDS_MENF21BMC)		+= leds-menf21bmc.o
 obj-$(CONFIG_LEDS_KTD2692)		+= leds-ktd2692.o
 obj-$(CONFIG_LEDS_POWERNV)		+= leds-powernv.o
+obj-$(CONFIG_LEDS_SEAD3)		+= leds-sead3.o
 
 # LED SPI Drivers
 obj-$(CONFIG_LEDS_DAC124S085)		+= leds-dac124s085.o

arch/mips/mti-sead3/leds-sead3.c → drivers/leds/leds-sead3.c

@@ -59,6 +59,7 @@ static int sead3_led_remove(struct platform_device *pdev)
 {
 	led_classdev_unregister(&sead3_pled);
 	led_classdev_unregister(&sead3_fled);
+
 	return 0;
 }