Skip to content

L
linux
Commit 22f4bf8a authored by Russell King's avatar Russell King Committed by David S. Miller
Browse files
Options

net: mvneta: add 1000BaseX support 

Add support for 1000BaseX link modes.
Signed-off-by: default avatarRussell King <rmk+kernel@arm.linux.org.uk>
Signed-off-by: default avatarDavid S. Miller <davem@davemloft.net>
parent 32699954
Hide whitespace changes
Inline Side-by-side
Showing with 50 additions and 9 deletions
drivers/net/ethernet/marvell/mvneta.c
View file @ 22f4bf8a
......@@ -189,6 +189,7 @@
#define MVNETA_GMAC_CTRL_0 0x2c00
#define MVNETA_GMAC_MAX_RX_SIZE_SHIFT 2
#define MVNETA_GMAC_MAX_RX_SIZE_MASK 0x7ffc
#define MVNETA_GMAC0_PORT_1000BASE_X BIT(1)
#define MVNETA_GMAC0_PORT_ENABLE BIT(0)
#define MVNETA_GMAC_CTRL_2 0x2c08
#define MVNETA_GMAC2_INBAND_AN_ENABLE BIT(0)
......@@ -210,9 +211,13 @@
#define MVNETA_GMAC_FORCE_LINK_DOWN BIT(0)
#define MVNETA_GMAC_FORCE_LINK_PASS BIT(1)
#define MVNETA_GMAC_INBAND_AN_ENABLE BIT(2)
#define MVNETA_GMAC_AN_BYPASS_ENABLE BIT(3)
#define MVNETA_GMAC_INBAND_RESTART_AN BIT(4)
#define MVNETA_GMAC_CONFIG_MII_SPEED BIT(5)
#define MVNETA_GMAC_CONFIG_GMII_SPEED BIT(6)
#define MVNETA_GMAC_AN_SPEED_EN BIT(7)
#define MVNETA_GMAC_CONFIG_FLOW_CTRL BIT(8)
#define MVNETA_GMAC_ADVERT_SYM_FLOW_CTRL BIT(9)
#define MVNETA_GMAC_AN_FLOW_CTRL_EN BIT(11)
#define MVNETA_GMAC_CONFIG_FULL_DUPLEX BIT(12)
#define MVNETA_GMAC_AN_DUPLEX_EN BIT(13)
......@@ -3192,10 +3197,11 @@ static void mvneta_validate(struct net_device *ndev, unsigned long *supported,
{
__ETHTOOL_DECLARE_LINK_MODE_MASK(mask) = { 0, };
/* We only support QSGMII, SGMII and RGMII modes */
/* We only support QSGMII, SGMII, 802.3z and RGMII modes */
if (state->interface != PHY_INTERFACE_MODE_NA &&
state->interface != PHY_INTERFACE_MODE_QSGMII &&
state->interface != PHY_INTERFACE_MODE_SGMII &&
!phy_interface_mode_is_8023z(state->interface) &&
!phy_interface_mode_is_rgmii(state->interface)) {
bitmap_zero(supported, __ETHTOOL_LINK_MODE_MASK_NBITS);
return;
......@@ -3208,10 +3214,14 @@ static void mvneta_validate(struct net_device *ndev, unsigned long *supported,
/* Half-duplex at speeds higher than 100Mbit is unsupported */
phylink_set(mask, 1000baseT_Full);
phylink_set(mask, 1000baseX_Full);
phylink_set(mask, 10baseT_Half);
phylink_set(mask, 10baseT_Full);
phylink_set(mask, 100baseT_Half);
phylink_set(mask, 100baseT_Full);
if (!phy_interface_mode_is_8023z(state->interface)) {
/* 10M and 100M are only supported in non-802.3z mode */
phylink_set(mask, 10baseT_Half);
phylink_set(mask, 10baseT_Full);
phylink_set(mask, 100baseT_Half);
phylink_set(mask, 100baseT_Full);
}
bitmap_and(supported, supported, mask,
__ETHTOOL_LINK_MODE_MASK_NBITS);
......@@ -3243,14 +3253,27 @@ static int mvneta_mac_link_state(struct net_device *ndev,
return 1;
}
static void mvneta_mac_an_restart(struct net_device *ndev)
{
struct mvneta_port *pp = netdev_priv(ndev);
u32 gmac_an = mvreg_read(pp, MVNETA_GMAC_AUTONEG_CONFIG);
mvreg_write(pp, MVNETA_GMAC_AUTONEG_CONFIG,
gmac_an | MVNETA_GMAC_INBAND_RESTART_AN);
mvreg_write(pp, MVNETA_GMAC_AUTONEG_CONFIG,
gmac_an & ~MVNETA_GMAC_INBAND_RESTART_AN);
}
static void mvneta_mac_config(struct net_device *ndev, unsigned int mode,
const struct phylink_link_state *state)
{
struct mvneta_port *pp = netdev_priv(ndev);
u32 new_ctrl0, gmac_ctrl0 = mvreg_read(pp, MVNETA_GMAC_CTRL_0);
u32 new_ctrl2, gmac_ctrl2 = mvreg_read(pp, MVNETA_GMAC_CTRL_2);
u32 new_clk, gmac_clk = mvreg_read(pp, MVNETA_GMAC_CLOCK_DIVIDER);
u32 new_an, gmac_an = mvreg_read(pp, MVNETA_GMAC_AUTONEG_CONFIG);
new_ctrl0 = gmac_ctrl0 & ~MVNETA_GMAC0_PORT_1000BASE_X;
new_ctrl2 = gmac_ctrl2 & ~(MVNETA_GMAC2_INBAND_AN_ENABLE |
MVNETA_GMAC2_PORT_RESET);
new_clk = gmac_clk & ~MVNETA_GMAC_1MS_CLOCK_ENABLE;
......@@ -3259,6 +3282,8 @@ static void mvneta_mac_config(struct net_device *ndev, unsigned int mode,
MVNETA_GMAC_CONFIG_MII_SPEED |
MVNETA_GMAC_CONFIG_GMII_SPEED |
MVNETA_GMAC_AN_SPEED_EN |
MVNETA_GMAC_ADVERT_SYM_FLOW_CTRL |
MVNETA_GMAC_CONFIG_FLOW_CTRL |
MVNETA_GMAC_AN_FLOW_CTRL_EN |
MVNETA_GMAC_CONFIG_FULL_DUPLEX |
MVNETA_GMAC_AN_DUPLEX_EN);
......@@ -3269,7 +3294,8 @@ static void mvneta_mac_config(struct net_device *ndev, unsigned int mode,
new_ctrl2 |= MVNETA_GMAC2_PORT_RGMII;
if (state->interface == PHY_INTERFACE_MODE_QSGMII ||
state->interface == PHY_INTERFACE_MODE_SGMII)
state->interface == PHY_INTERFACE_MODE_SGMII ||
phy_interface_mode_is_8023z(state->interface))
new_ctrl2 |= MVNETA_GMAC2_PCS_ENABLE;
if (!phylink_autoneg_inband(mode)) {
......@@ -3281,7 +3307,7 @@ static void mvneta_mac_config(struct net_device *ndev, unsigned int mode,
new_an |= MVNETA_GMAC_CONFIG_GMII_SPEED;
else if (state->speed == SPEED_100)
new_an |= MVNETA_GMAC_CONFIG_MII_SPEED;
} else {
} else if (state->interface == PHY_INTERFACE_MODE_SGMII) {
/* SGMII mode receives the state from the PHY */
new_ctrl2 |= MVNETA_GMAC2_INBAND_AN_ENABLE;
new_clk |= MVNETA_GMAC_1MS_CLOCK_ENABLE;
......@@ -3290,18 +3316,31 @@ static void mvneta_mac_config(struct net_device *ndev, unsigned int mode,
MVNETA_GMAC_INBAND_AN_ENABLE |
MVNETA_GMAC_AN_SPEED_EN |
MVNETA_GMAC_AN_DUPLEX_EN;
} else {
/* 802.3z negotiation - only 1000base-X */
new_ctrl0 |= MVNETA_GMAC0_PORT_1000BASE_X;
new_clk |= MVNETA_GMAC_1MS_CLOCK_ENABLE;
new_an = (new_an & ~(MVNETA_GMAC_FORCE_LINK_DOWN |
MVNETA_GMAC_FORCE_LINK_PASS)) |
MVNETA_GMAC_INBAND_AN_ENABLE |
MVNETA_GMAC_CONFIG_GMII_SPEED |
/* The MAC only supports FD mode */
MVNETA_GMAC_CONFIG_FULL_DUPLEX;
}
/* Armada 370 documentation says we can only change the port mode
* and in-band enable when the link is down, so force it down
* while making these changes. We also do this for GMAC_CTRL2 */
if ((new_ctrl2 ^ gmac_ctrl2) & MVNETA_GMAC2_INBAND_AN_ENABLE ||
if ((new_ctrl0 ^ gmac_ctrl0) & MVNETA_GMAC0_PORT_1000BASE_X ||
(new_ctrl2 ^ gmac_ctrl2) & MVNETA_GMAC2_INBAND_AN_ENABLE ||
(new_an ^ gmac_an) & MVNETA_GMAC_INBAND_AN_ENABLE) {
mvreg_write(pp, MVNETA_GMAC_AUTONEG_CONFIG,
(gmac_an & ~MVNETA_GMAC_FORCE_LINK_PASS) |
MVNETA_GMAC_FORCE_LINK_DOWN);
}
if (new_ctrl0 != gmac_ctrl0)
mvreg_write(pp, MVNETA_GMAC_CTRL_0, new_ctrl0);
if (new_ctrl2 != gmac_ctrl2)
mvreg_write(pp, MVNETA_GMAC_CTRL_2, new_ctrl2);
if (new_clk != gmac_clk)
......@@ -3350,6 +3389,7 @@ static void mvneta_mac_link_up(struct net_device *ndev, unsigned int mode,
static const struct phylink_mac_ops mvneta_phylink_ops = {
.validate = mvneta_validate,
.mac_link_state = mvneta_mac_link_state,
.mac_an_restart = mvneta_mac_an_restart,
.mac_config = mvneta_mac_config,
.mac_link_down = mvneta_mac_link_down,
.mac_link_up = mvneta_mac_link_up,
......@@ -4096,7 +4136,8 @@ static int mvneta_port_power_up(struct mvneta_port *pp, int phy_mode)
if (phy_mode == PHY_INTERFACE_MODE_QSGMII)
mvreg_write(pp, MVNETA_SERDES_CFG, MVNETA_QSGMII_SERDES_PROTO);
else if (phy_mode == PHY_INTERFACE_MODE_SGMII)
else if (phy_mode == PHY_INTERFACE_MODE_SGMII ||
phy_mode == PHY_INTERFACE_MODE_1000BASEX)
mvreg_write(pp, MVNETA_SERDES_CFG, MVNETA_SGMII_SERDES_PROTO);
else if (!phy_interface_mode_is_rgmii(phy_mode))
return -EINVAL;
......
Markdown is supported
0% or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment
GitLab Nexedi Edition | About GitLab | About Nexedi | 沪ICP备2021021310号-2 | 沪ICP备2021021310号-7