hwmon: (nct6775) Change labels for nct6799

nct6799d-r and nct6796d-s are very similar and chip_id is only
different in the version nibblet.

Since both will be detected by the driver anyway due to the
chipid mask, they should be labeled together for dmesg msg.
Signed-off-by: Ahmad Khalifa <ahmad@khalifa.ws>
Link: https://lore.kernel.org/r/20230715195244.1334723-1-ahmad@khalifa.wsSigned-off-by: Guenter Roeck <linux@roeck-us.net>

Documentation/hwmon/nct6775.rst

@@ -80,7 +80,13 @@ Supported chips:
 
     Datasheet: Available from Nuvoton upon request
 
+  * Nuvoton NCT6796D-S/NCT6799D-R
 
+    Prefix: 'nct6799'
+
+    Addresses scanned: ISA address retrieved from Super I/O registers
+
+    Datasheet: Available from Nuvoton upon request
 
 Authors:
 
@@ -277,4 +283,7 @@ will not reflect a usable value. It often reports unreasonably high
 temperatures, and in some cases the reported temperature declines if the actual
 temperature increases (similar to the raw PECI temperature value - see PECI
 specification for details). CPUTIN should therefore be ignored on ASUS
-boards. The CPU temperature on ASUS boards is reported from PECI 0.
+boards. The CPU temperature on ASUS boards is reported from PECI 0 or TSI 0.
+
+NCT6796D-S and NCT6799D-R chips are very similar and their chip_id indicates
+they are different versions. This driver treats them the same way.

drivers/hwmon/nct6775-core.c

@@ -33,7 +33,8 @@
  *                                           (0xd451)
  * nct6798d    14      7       7       2+6    0xd428 0xc1    0x5ca3
  *                                           (0xd429)
- * nct6799d    14      7       7       2+6    0xd802 0xc1    0x5ca3
+ * nct6796d-s  18      7       7       6+2    0xd801 0xc1    0x5ca3
+ * nct6799d-r  18      7       7       6+2    0xd802 0xc1    0x5ca3
  *
  * #temp lists the number of monitored temperature sources (first value) plus
  * the number of directly connectable temperature sensors (second value).

drivers/hwmon/nct6775-platform.c

@@ -35,7 +35,7 @@ static const char * const nct6775_sio_names[] __initconst = {
 	"NCT6796D",
 	"NCT6797D",
 	"NCT6798D",
-	"NCT6799D",
+	"NCT6796D-S/NCT6799D-R",
 };
 
 static unsigned short force_id;