Merge bk://linux.bkbits.net/linux-2.5

into hostme.bitkeeper.com:/ua/repos/n/nfsclient/linux-2.5

CREDITS

@@ -1549,6 +1549,18 @@ S: Tallak 95
 S: 8103 Rein
 S: Austria
 
+N: Mitsuru Kanda
+E: mk@linux-ipv6.org
+E: mk@isl.rdc.toshiba.co.jp
+E: mk@karaba.org
+W: http://www.karaba.org/~mk/
+P: 1024D/2EC7E30D 9A35 D378 F084 9EA4 EFBA  925B 1C93 B376 F0EF BE59
+D: IPsec, IPv6
+D: USAGI/WIDE Project, TOSHIBA CORPORATION
+S: 2-47-8, Takinogawa,
+S: Kita, Tokyo 114-0023
+S: Japan
+
 N: Jan Kara
 E: jack@atrey.karlin.mff.cuni.cz
 E: jack@suse.cz
@@ -2200,6 +2212,17 @@ S: 7406 Wheat Field Rd
 S: Garland, Texas 75044
 S: USA
 
+N: Kazunori Miyazawa
+E: miyazawa@linux-ipv6.org
+E: Kazunori.Miyazawa@jp.yokogawa.com
+E: kazunori@miyazawa.org
+W: http://www.miyazawa.org/~kazunori/
+D: IPsec, IPv6
+D: USAGI/WIDE Project, Yokogawa Electric Corporation
+S: 2-20-4-203, Nakacho,
+S: Musashino, Tokyo 180-0006
+S: Japan
+
 N: Patrick Mochel
 E: mochel@osdl.org
 E: mochelp@infinity.powertie.org
@@ -3442,6 +3465,17 @@ D: Workbit NinjaSCSI-3/32Bi PCMCIA driver
 D: Workbit NinjaSCSI-32Bi/UDE driver
 S: Japan
 
+N: Hideaki YOSHIFUJI
+E: hideaki@yoshifuji.org
+E: yoshfuji@linux-ipv6.org
+W: http://www.yoshifuji.org/~hideaki/
+P: 1024D/E0620EEA 9022 65EB 1ECF 3AD1 0BDF  80D8 4807 F894 E062 0EEA
+D: IPv6 and other networking related stuff
+D: USAGI/WIDE Project, The University of Tokyo
+S: Green House #102, 1-15-5, Nishikata, 
+S: Bunkyo, Tokyo 113-0024
+S: Japan
+
 N: Eric Youngdale
 E: eric@andante.org
 W: http://www.andante.org

MAINTAINERS

@@ -1278,6 +1278,8 @@ P:	Pekka Savola (ipv6)
 M:	pekkas@netcore.fi
 P:	James Morris
 M:	jmorris@intercode.com.au
+P:	Hideaki YOSHIFUJI
+M:	yoshfuji@linux-ipv6.org
 L:	netdev@oss.sgi.com
 S:	Maintained
 

arch/i386/kernel/ldt.c

@@ -119,7 +119,7 @@ void destroy_context(struct mm_struct *mm)
 	}
 }
 
-static int read_ldt(void * ptr, unsigned long bytecount)
+static int read_ldt(void __user * ptr, unsigned long bytecount)
 {
 	int err;
 	unsigned long size;
@@ -148,7 +148,7 @@ static int read_ldt(void * ptr, unsigned long bytecount)
 	return bytecount;
 }
 
-static int read_default_ldt(void * ptr, unsigned long bytecount)
+static int read_default_ldt(void __user * ptr, unsigned long bytecount)
 {
 	int err;
 	unsigned long size;
@@ -167,7 +167,7 @@ static int read_default_ldt(void * ptr, unsigned long bytecount)
 	return err;
 }
 
-static int write_ldt(void * ptr, unsigned long bytecount, int oldmode)
+static int write_ldt(void __user * ptr, unsigned long bytecount, int oldmode)
 {
 	struct mm_struct * mm = current->mm;
 	__u32 entry_1, entry_2, *lp;
@@ -226,7 +226,7 @@ static int write_ldt(void * ptr, unsigned long bytecount, int oldmode)
 	return error;
 }
 
-asmlinkage int sys_modify_ldt(int func, void *ptr, unsigned long bytecount)
+asmlinkage int sys_modify_ldt(int func, void __user *ptr, unsigned long bytecount)
 {
 	int ret = -ENOSYS;
 

arch/i386/kernel/sys_i386.c

@@ -26,7 +26,7 @@
  * sys_pipe() is the normal C calling standard for creating
  * a pipe. It's not the way Unix traditionally does this, though.
  */
-asmlinkage int sys_pipe(unsigned long * fildes)
+asmlinkage int sys_pipe(unsigned long __user * fildes)
 {
 	int fd[2];
 	int error;
@@ -88,7 +88,7 @@ struct mmap_arg_struct {
 	unsigned long offset;
 };
 
-asmlinkage int old_mmap(struct mmap_arg_struct *arg)
+asmlinkage int old_mmap(struct mmap_arg_struct __user *arg)
 {
 	struct mmap_arg_struct a;
 	int err = -EFAULT;
@@ -106,15 +106,15 @@ asmlinkage int old_mmap(struct mmap_arg_struct *arg)
 }
 
 
-extern asmlinkage int sys_select(int, fd_set *, fd_set *, fd_set *, struct timeval *);
+extern asmlinkage int sys_select(int, fd_set __user *, fd_set __user *, fd_set __user *, struct timeval __user *);
 
 struct sel_arg_struct {
 	unsigned long n;
-	fd_set *inp, *outp, *exp;
-	struct timeval *tvp;
+	fd_set __user *inp, *outp, *exp;
+	struct timeval __user *tvp;
 };
 
-asmlinkage int old_select(struct sel_arg_struct *arg)
+asmlinkage int old_select(struct sel_arg_struct __user *arg)
 {
 	struct sel_arg_struct a;
 
@@ -130,7 +130,7 @@ asmlinkage int old_select(struct sel_arg_struct *arg)
  * This is really horribly ugly.
  */
 asmlinkage int sys_ipc (uint call, int first, int second,
-			int third, void *ptr, long fifth)
+			int third, void __user *ptr, long fifth)
 {
 	int version, ret;
 
@@ -139,10 +139,10 @@ asmlinkage int sys_ipc (uint call, int first, int second,
 
 	switch (call) {
 	case SEMOP:
-		return sys_semtimedop (first, (struct sembuf *)ptr, second, NULL);
+		return sys_semtimedop (first, (struct sembuf __user *)ptr, second, NULL);
 	case SEMTIMEDOP:
-		return sys_semtimedop(first, (struct sembuf *)ptr, second,
-					(const struct timespec *)fifth);
+		return sys_semtimedop(first, (struct sembuf __user *)ptr, second,
+					(const struct timespec __user *)fifth);
 
 	case SEMGET:
 		return sys_semget (first, second, third);
@@ -150,13 +150,13 @@ asmlinkage int sys_ipc (uint call, int first, int second,
 		union semun fourth;
 		if (!ptr)
 			return -EINVAL;
-		if (get_user(fourth.__pad, (void **) ptr))
+		if (get_user(fourth.__pad, (void * __user *) ptr))
 			return -EFAULT;
 		return sys_semctl (first, second, third, fourth);
 	}
 
 	case MSGSND:
-		return sys_msgsnd (first, (struct msgbuf *) ptr, 
+		return sys_msgsnd (first, (struct msgbuf __user *) ptr, 
 				   second, third);
 	case MSGRCV:
 		switch (version) {
@@ -166,7 +166,7 @@ asmlinkage int sys_ipc (uint call, int first, int second,
 				return -EINVAL;
 			
 			if (copy_from_user(&tmp,
-					   (struct ipc_kludge *) ptr, 
+					   (struct ipc_kludge __user *) ptr, 
 					   sizeof (tmp)))
 				return -EFAULT;
 			return sys_msgrcv (first, tmp.msgp, second,
@@ -174,35 +174,36 @@ asmlinkage int sys_ipc (uint call, int first, int second,
 		}
 		default:
 			return sys_msgrcv (first,
-					   (struct msgbuf *) ptr,
+					   (struct msgbuf __user *) ptr,
 					   second, fifth, third);
 		}
 	case MSGGET:
 		return sys_msgget ((key_t) first, second);
 	case MSGCTL:
-		return sys_msgctl (first, second, (struct msqid_ds *) ptr);
+		return sys_msgctl (first, second, (struct msqid_ds __user *) ptr);
 
 	case SHMAT:
 		switch (version) {
 		default: {
 			ulong raddr;
-			ret = sys_shmat (first, (char *) ptr, second, &raddr);
+			ret = sys_shmat (first, (char __user *) ptr, second, &raddr);
 			if (ret)
 				return ret;
-			return put_user (raddr, (ulong *) third);
+			return put_user (raddr, (ulong __user *) third);
 		}
 		case 1:	/* iBCS2 emulator entry point */
 			if (!segment_eq(get_fs(), get_ds()))
 				return -EINVAL;
-			return sys_shmat (first, (char *) ptr, second, (ulong *) third);
+			/* The "(ulong *) third" is valid _only_ because of the kernel segment thing */
+			return sys_shmat (first, (char __user *) ptr, second, (ulong *) third);
 		}
 	case SHMDT: 
-		return sys_shmdt ((char *)ptr);
+		return sys_shmdt ((char __user *)ptr);
 	case SHMGET:
 		return sys_shmget (first, second, third);
 	case SHMCTL:
 		return sys_shmctl (first, second,
-				   (struct shmid_ds *) ptr);
+				   (struct shmid_ds __user *) ptr);
 	default:
 		return -ENOSYS;
 	}
@@ -211,7 +212,7 @@ asmlinkage int sys_ipc (uint call, int first, int second,
 /*
  * Old cruft
  */
-asmlinkage int sys_uname(struct old_utsname * name)
+asmlinkage int sys_uname(struct old_utsname __user * name)
 {
 	int err;
 	if (!name)
@@ -222,7 +223,7 @@ asmlinkage int sys_uname(struct old_utsname * name)
 	return err?-EFAULT:0;
 }
 
-asmlinkage int sys_olduname(struct oldold_utsname * name)
+asmlinkage int sys_olduname(struct oldold_utsname __user * name)
 {
 	int error;
 

arch/i386/kernel/vm86.c

@@ -170,7 +170,7 @@ static void mark_screen_rdonly(struct task_struct * tsk)
 static int do_vm86_irq_handling(int subfunction, int irqnumber);
 static void do_sys_vm86(struct kernel_vm86_struct *info, struct task_struct *tsk);
 
-asmlinkage int sys_vm86old(struct vm86_struct * v86)
+asmlinkage int sys_vm86old(struct vm86_struct __user * v86)
 {
 	struct kernel_vm86_struct info; /* declare this _on top_,
 					 * this avoids wasting of stack space.
@@ -199,7 +199,7 @@ asmlinkage int sys_vm86old(struct vm86_struct * v86)
 }
 
 
-asmlinkage int sys_vm86(unsigned long subfunction, struct vm86plus_struct * v86)
+asmlinkage int sys_vm86(unsigned long subfunction, struct vm86plus_struct __user * v86)
 {
 	struct kernel_vm86_struct info; /* declare this _on top_,
 					 * this avoids wasting of stack space.
@@ -239,7 +239,7 @@ asmlinkage int sys_vm86(unsigned long subfunction, struct vm86plus_struct * v86)
 		goto out;
 	info.regs32 = (struct pt_regs *) &subfunction;
 	info.vm86plus.is_vm86pus = 1;
-	tsk->thread.vm86_info = (struct vm86_struct *)v86;
+	tsk->thread.vm86_info = (struct vm86_struct __user *)v86;
 	do_sys_vm86(&info, tsk);
 	ret = 0;	/* we never return here */
 out:

drivers/atm/he.h

@@ -371,13 +371,8 @@ struct he_vcc
 
 	int rc_index;
 
-#if LINUX_VERSION_CODE < KERNEL_VERSION(2,3,1)
-	struct wait_queue *rx_waitq;
-	atruct wait_queue *tx_waitq;
-#else
 	wait_queue_head_t rx_waitq;
 	wait_queue_head_t tx_waitq;
-#endif
 };
 
 #define HE_VCC(vcc)	((struct he_vcc *)(vcc->dev_data))

drivers/atm/iphase.c

@@ -2777,7 +2777,7 @@ static int ia_ioctl(struct atm_dev *dev, unsigned int cmd, void *arg)
 	     if (!capable(CAP_NET_ADMIN)) return -EPERM;
              tmps = (u16 *)ia_cmds.buf;
              for(i=0; i<0x80; i+=2, tmps++)
-                if(put_user(*(u16*)(iadev->seg_reg+i), tmps)) return -EFAULT;
+                if(put_user((u16)(readl(iadev->seg_reg+i) & 0xffff), tmps)) return -EFAULT;
              ia_cmds.status = 0;
              ia_cmds.len = 0x80;
              break;
@@ -2785,7 +2785,7 @@ static int ia_ioctl(struct atm_dev *dev, unsigned int cmd, void *arg)
 	     if (!capable(CAP_NET_ADMIN)) return -EPERM;
              tmps = (u16 *)ia_cmds.buf;
              for(i=0; i<0x80; i+=2, tmps++)
-                if(put_user(*(u16*)(iadev->reass_reg+i), tmps)) return -EFAULT;
+                if(put_user((u16)(readl(iadev->reass_reg+i) & 0xffff), tmps)) return -EFAULT;
              ia_cmds.status = 0;
              ia_cmds.len = 0x80;
              break;
@@ -2802,10 +2802,10 @@ static int ia_ioctl(struct atm_dev *dev, unsigned int cmd, void *arg)
 	     rfL = &regs_local->rfredn;
              /* Copy real rfred registers into the local copy */
  	     for (i=0; i<(sizeof (rfredn_t))/4; i++)
-                ((u_int *)rfL)[i] = ((u_int *)iadev->reass_reg)[i] & 0xffff;
+                ((u_int *)rfL)[i] = readl(iadev->reass_reg + i) & 0xffff;
              	/* Copy real ffred registers into the local copy */
 	     for (i=0; i<(sizeof (ffredn_t))/4; i++)
-                ((u_int *)ffL)[i] = ((u_int *)iadev->seg_reg)[i] & 0xffff;
+                ((u_int *)ffL)[i] = readl(iadev->seg_reg + i) & 0xffff;
 
              if (copy_to_user(ia_cmds.buf, regs_local,sizeof(ia_regs_t))) {
                 kfree(regs_local);

drivers/base/class.c

@@ -133,6 +133,21 @@ static void class_device_dev_unlink(struct class_device * class_dev)
 		sysfs_remove_link(&class_dev->kobj, "device");
 }
 
+static int class_device_driver_link(struct class_device * class_dev)
+{
+	if ((class_dev->dev) && (class_dev->dev->driver))
+		return sysfs_create_link(&class_dev->kobj,
+					 &class_dev->dev->driver->kobj, "driver");
+	return 0;
+}
+
+static void class_device_driver_unlink(struct class_device * class_dev)
+{
+	if ((class_dev->dev) && (class_dev->dev->driver))
+		sysfs_remove_link(&class_dev->kobj, "driver");
+}
+
+
 #define to_class_dev(obj) container_of(obj,struct class_device,kobj)
 #define to_class_dev_attr(_attr) container_of(_attr,struct class_device_attribute,attr)
 
@@ -244,7 +259,6 @@ int class_device_add(struct class_device *class_dev)
 
 	/* first, register with generic layer. */
 	strncpy(class_dev->kobj.name, class_dev->class_id, KOBJ_NAME_LEN);
-	kobj_set_kset_s(class_dev, class_subsys);
 	kobj_set_kset_s(class_dev, class_obj_subsys);
 	if (parent)
 		class_dev->kobj.parent = &parent->subsys.kset.kobj;
@@ -265,6 +279,7 @@ int class_device_add(struct class_device *class_dev)
 	}
 
 	class_device_dev_link(class_dev);
+	class_device_driver_link(class_dev);
 
  register_done:
 	if (error && parent)
@@ -298,6 +313,7 @@ void class_device_del(struct class_device *class_dev)
 
 	if (class_dev->dev) {
 		class_device_dev_unlink(class_dev);
+		class_device_driver_unlink(class_dev);
 		put_device(class_dev->dev);
 	}
 	

drivers/block/deadline-iosched.c

@@ -28,7 +28,7 @@ static int writes_starved = 2;    /* max times reads can starve a write */
 static int fifo_batch = 16;       /* # of sequential requests treated as one
 				     by the above parameters. For throughput. */
 
-static const int deadline_hash_shift = 10;
+static const int deadline_hash_shift = 5;
 #define DL_HASH_BLOCK(sec)	((sec) >> 3)
 #define DL_HASH_FN(sec)		(hash_long(DL_HASH_BLOCK((sec)), deadline_hash_shift))
 #define DL_HASH_ENTRIES		(1 << deadline_hash_shift)
@@ -71,6 +71,8 @@ struct deadline_data {
 	int fifo_batch;
 	int writes_starved;
 	int front_merges;
+
+	mempool_t *drq_pool;
 };
 
 /*
@@ -130,6 +132,21 @@ deadline_add_drq_hash(struct deadline_data *dd, struct deadline_rq *drq)
 	list_add(&drq->hash, &dd->hash[DL_HASH_FN(rq_hash_key(rq))]);
 }
 
+/*
+ * move hot entry to front of chain
+ */
+static inline void
+deadline_hot_drq_hash(struct deadline_data *dd, struct deadline_rq *drq)
+{
+	struct request *rq = drq->request;
+	struct list_head *head = &dd->hash[DL_HASH_FN(rq_hash_key(rq))];
+
+	if (ON_HASH(drq) && drq->hash.prev != head) {
+		list_del(&drq->hash);
+		list_add(&drq->hash, head);
+	}
+}
+
 static struct request *
 deadline_find_drq_hash(struct deadline_data *dd, sector_t offset)
 {
@@ -353,6 +370,8 @@ deadline_merge(request_queue_t *q, struct list_head **insert, struct bio *bio)
 out:
 	q->last_merge = &__rq->queuelist;
 out_insert:
+	if (ret)
+		deadline_hot_drq_hash(dd, RQ_DATA(__rq));
 	*insert = &__rq->queuelist;
 	return ret;
 }
@@ -673,28 +692,11 @@ deadline_latter_request(request_queue_t *q, struct request *rq)
 static void deadline_exit(request_queue_t *q, elevator_t *e)
 {
 	struct deadline_data *dd = e->elevator_data;
-	struct deadline_rq *drq;
-	struct request *rq;
-	int i;
 
 	BUG_ON(!list_empty(&dd->fifo_list[READ]));
 	BUG_ON(!list_empty(&dd->fifo_list[WRITE]));
 
-	for (i = READ; i <= WRITE; i++) {
-		struct request_list *rl = &q->rq[i];
-		struct list_head *entry;
-
-		list_for_each(entry, &rl->free) {
-			rq = list_entry_rq(entry);
-
-			if ((drq = RQ_DATA(rq)) == NULL)
-				continue;
-
-			rq->elevator_private = NULL;
-			kmem_cache_free(drq_pool, drq);
-		}
-	}
-
+	mempool_destroy(dd->drq_pool);
 	kfree(dd->hash);
 	kfree(dd);
 }
@@ -706,9 +708,7 @@ static void deadline_exit(request_queue_t *q, elevator_t *e)
 static int deadline_init(request_queue_t *q, elevator_t *e)
 {
 	struct deadline_data *dd;
-	struct deadline_rq *drq;
-	struct request *rq;
-	int i, ret = 0;
+	int i;
 
 	if (!drq_pool)
 		return -ENOMEM;
@@ -724,6 +724,13 @@ static int deadline_init(request_queue_t *q, elevator_t *e)
 		return -ENOMEM;
 	}
 
+	dd->drq_pool = mempool_create(BLKDEV_MIN_RQ, mempool_alloc_slab, mempool_free_slab, drq_pool);
+	if (!dd->drq_pool) {
+		kfree(dd->hash);
+		kfree(dd);
+		return -ENOMEM;
+	}
+
 	for (i = 0; i < DL_HASH_ENTRIES; i++)
 		INIT_LIST_HEAD(&dd->hash[i]);
 
@@ -739,33 +746,41 @@ static int deadline_init(request_queue_t *q, elevator_t *e)
 	dd->front_merges = 1;
 	dd->fifo_batch = fifo_batch;
 	e->elevator_data = dd;
+	return 0;
+}
 
-	for (i = READ; i <= WRITE; i++) {
-		struct request_list *rl = &q->rq[i];
-		struct list_head *entry;
+static void deadline_put_request(request_queue_t *q, struct request *rq)
+{
+	struct deadline_data *dd = q->elevator.elevator_data;
+	struct deadline_rq *drq = RQ_DATA(rq);
 
-		list_for_each(entry, &rl->free) {
-			rq = list_entry_rq(entry);
+	if (drq) {
+		mempool_free(drq, dd->drq_pool);
+		rq->elevator_private = NULL;
+	}
+}
 
-			drq = kmem_cache_alloc(drq_pool, GFP_KERNEL);
-			if (!drq) {
-				ret = -ENOMEM;
-				break;
-			}
+static int
+deadline_set_request(request_queue_t *q, struct request *rq, int gfp_mask)
+{
+	struct deadline_data *dd = q->elevator.elevator_data;
+	struct deadline_rq *drq;
 
-			memset(drq, 0, sizeof(*drq));
-			INIT_LIST_HEAD(&drq->fifo);
-			INIT_LIST_HEAD(&drq->hash);
-			RB_CLEAR(&drq->rb_node);
-			drq->request = rq;
-			rq->elevator_private = drq;
-		}
-	}
+	drq = mempool_alloc(dd->drq_pool, gfp_mask);
+	if (drq) {
+		RB_CLEAR(&drq->rb_node);
+		drq->request = rq;
 
-	if (ret)
-		deadline_exit(q, e);
+		INIT_LIST_HEAD(&drq->hash);
+		drq->hash_valid_count = 0;
 
-	return ret;
+		INIT_LIST_HEAD(&drq->fifo);
+
+		rq->elevator_private = drq;
+		return 0;
+	}
+
+	return 1;
 }
 
 /*
@@ -916,6 +931,8 @@ elevator_t iosched_deadline = {
 	.elevator_queue_empty_fn =	deadline_queue_empty,
 	.elevator_former_req_fn =	deadline_former_request,
 	.elevator_latter_req_fn =	deadline_latter_request,
+	.elevator_set_req_fn =		deadline_set_request,
+	.elevator_put_req_fn = 		deadline_put_request,
 	.elevator_init_fn =		deadline_init,
 	.elevator_exit_fn =		deadline_exit,
 

drivers/block/elevator.c

@@ -408,6 +408,25 @@ struct request *elv_former_request(request_queue_t *q, struct request *rq)
 	return NULL;
 }
 
+int elv_set_request(request_queue_t *q, struct request *rq, int gfp_mask)
+{
+	elevator_t *e = &q->elevator;
+
+	if (e->elevator_set_req_fn)
+		return e->elevator_set_req_fn(q, rq, gfp_mask);
+
+	rq->elevator_private = NULL;
+	return 0;
+}
+
+void elv_put_request(request_queue_t *q, struct request *rq)
+{
+	elevator_t *e = &q->elevator;
+
+	if (e->elevator_put_req_fn)
+		e->elevator_put_req_fn(q, rq);
+}
+
 int elv_register_queue(struct gendisk *disk)
 {
 	request_queue_t *q = disk->queue;

drivers/i2c/i2c-core.c

@@ -55,13 +55,17 @@ int i2c_device_remove(struct device *dev)
 	return 0;
 }
 
-static struct device_driver i2c_generic_driver = {
-	.name =	"i2c",
+static struct device_driver i2c_adapter_driver = {
+	.name =	"i2c_adapter",
 	.bus = &i2c_bus_type,
 	.probe = i2c_device_probe,
 	.remove = i2c_device_remove,
 };
 
+static struct class i2c_adapter_class = {
+	.name =		"i2c-adapter"
+};
+
 
 /* ---------------------------------------------------
  * registering functions 
@@ -94,9 +98,16 @@ int i2c_add_adapter(struct i2c_adapter *adap)
 	if (adap->dev.parent == NULL)
 		adap->dev.parent = &legacy_bus;
 	sprintf(adap->dev.bus_id, "i2c-%d", adap->nr);
-	adap->dev.driver = &i2c_generic_driver;
+	adap->dev.driver = &i2c_adapter_driver;
 	device_register(&adap->dev);
 
+	/* Add this adapter to the i2c_adapter class */
+	memset(&adap->class_dev, 0x00, sizeof(struct class_device));
+	adap->class_dev.dev = &adap->dev;
+	adap->class_dev.class = &i2c_adapter_class;
+	strncpy(adap->class_dev.class_id, adap->dev.bus_id, BUS_ID_SIZE);
+	class_device_register(&adap->class_dev);
+
 	/* inform drivers of new adapters */
 	list_for_each(item,&drivers) {
 		driver = list_entry(item, struct i2c_driver, list);
@@ -150,6 +161,7 @@ int i2c_del_adapter(struct i2c_adapter *adap)
 	}
 
 	/* clean up the sysfs representation */
+	class_device_unregister(&adap->class_dev);
 	device_unregister(&adap->dev);
 	list_del(&adap->list);
 
@@ -443,14 +455,23 @@ struct bus_type i2c_bus_type = {
 	.match =	i2c_device_match,
 };
 
-
 static int __init i2c_init(void)
 {
-	return bus_register(&i2c_bus_type);
+	int retval;
+
+	retval = bus_register(&i2c_bus_type);
+	if (retval)
+		return retval;
+	retval = driver_register(&i2c_adapter_driver);
+	if (retval)
+		return retval;
+	return class_register(&i2c_adapter_class);
 }
 
 static void __exit i2c_exit(void)
 {
+	class_unregister(&i2c_adapter_class);
+	driver_unregister(&i2c_adapter_driver);
 	bus_unregister(&i2c_bus_type);
 }
 
@@ -475,7 +496,7 @@ int i2c_transfer(struct i2c_adapter * adap, struct i2c_msg msgs[],int num)
 
 		return ret;
 	} else {
-		dev_err(&adap->dev, "I2C level transfers not supported\n");
+		DEB2(dev_dbg(&adap->dev, "I2C level transfers not supported\n"));
 		return -ENOSYS;
 	}
 }

drivers/ide/ide-cd.c

@@ -2871,6 +2871,11 @@ int ide_cdrom_probe_capabilities (ide_drive_t *drive)
 	struct atapi_capabilities_page cap;
 	int nslots = 1;
 
+	if (drive->media == ide_optical) {
+		printk("%s: ATAPI magneto-optical drive\n", drive->name);
+		return nslots;
+	}
+
 	if (CDROM_CONFIG_FLAGS(drive)->nec260) {
 		CDROM_CONFIG_FLAGS(drive)->no_eject = 0;                       
 		CDROM_CONFIG_FLAGS(drive)->audio_play = 1;       
@@ -3337,7 +3342,7 @@ static int ide_cdrom_attach (ide_drive_t *drive)
 		goto failed;
 	if (!drive->present)
 		goto failed;
-	if (drive->media != ide_cdrom)
+	if (drive->media != ide_cdrom && drive->media != ide_optical)
 		goto failed;
 	/* skip drives that we were told to ignore */
 	if (ignore != NULL) {

drivers/ide/ide-probe.c

@@ -1235,7 +1235,7 @@ struct gendisk *ata_probe(dev_t dev, int *part, void *data)
 			(void) request_module("ide-disk");
 		if (drive->scsi)
 			(void) request_module("ide-scsi");
-		if (drive->media == ide_cdrom)
+		if (drive->media == ide_cdrom || drive->media == ide_optical)
 			(void) request_module("ide-cd");
 		if (drive->media == ide_tape)
 			(void) request_module("ide-tape");

drivers/net/ppp_generic.c

@@ -57,7 +57,9 @@
 #define NP_IPV6	1		/* Internet Protocol V6 */
 #define NP_IPX	2		/* IPX protocol */
 #define NP_AT	3		/* Appletalk protocol */
-#define NUM_NP	4		/* Number of NPs. */
+#define NP_MPLS_UC 4		/* MPLS unicast */
+#define NP_MPLS_MC 5		/* MPLS multicast */
+#define NUM_NP	6		/* Number of NPs. */
 
 #define MPHDRLEN	6	/* multilink protocol header length */
 #define MPHDRLEN_SSN	4	/* ditto with short sequence numbers */
@@ -281,6 +283,10 @@ static inline int proto_to_npindex(int proto)
 		return NP_IPX;
 	case PPP_AT:
 		return NP_AT;
+	case PPP_MPLS_UC:
+		return NP_MPLS_UC;
+	case PPP_MPLS_MC:
+		return NP_MPLS_MC;
 	}
 	return -EINVAL;
 }
@@ -291,6 +297,8 @@ static const int npindex_to_proto[NUM_NP] = {
 	PPP_IPV6,
 	PPP_IPX,
 	PPP_AT,
+	PPP_MPLS_UC,
+	PPP_MPLS_MC,
 };
 	
 /* Translates an ethertype into an NP index */
@@ -306,6 +314,10 @@ static inline int ethertype_to_npindex(int ethertype)
 	case ETH_P_PPPTALK:
 	case ETH_P_ATALK:
 		return NP_AT;
+	case ETH_P_MPLS_UC:
+		return NP_MPLS_UC;
+	case ETH_P_MPLS_MC:
+		return NP_MPLS_MC;
 	}
 	return -1;
 }
@@ -316,6 +328,8 @@ static const int npindex_to_ethertype[NUM_NP] = {
 	ETH_P_IPV6,
 	ETH_P_IPX,
 	ETH_P_PPPTALK,
+	ETH_P_MPLS_UC,
+	ETH_P_MPLS_MC,
 };
 
 /*

drivers/net/setup.c

@@ -9,14 +9,11 @@
 #include <linux/init.h>
 #include <linux/netlink.h>
 
-extern int x25_asy_init_ctrl_dev(void);
-  
 extern int dmascc_init(void);
 
 extern int arcnet_init(void); 
 extern int scc_enet_init(void); 
 extern int fec_enet_init(void); 
-extern int dlci_setup(void); 
 extern int sdla_setup(void); 
 extern int sdla_c_setup(void); 
 extern int comx_init(void);
@@ -51,9 +48,6 @@ static struct net_probe pci_probes[] __initdata = {
 #if defined(CONFIG_DMASCC)
 	{dmascc_init, 0},
 #endif	
-#if defined(CONFIG_DLCI)
-	{dlci_setup, 0},
-#endif
 #if defined(CONFIG_SDLA)
 	{sdla_c_setup, 0},
 #endif
@@ -101,19 +95,6 @@ static void __init network_probe(void)
 	}
 }
 
-
-/*
- *	Initialise the line discipline drivers
- */
- 
-static void __init network_ldisc_init(void)
-{
-#if defined(CONFIG_X25_ASY)
-	x25_asy_init_ctrl_dev();
-#endif
-}
-
-
 static void __init special_device_init(void)
 {
 #ifdef CONFIG_NET_SB1000
@@ -133,11 +114,8 @@ static void __init special_device_init(void)
  
 void __init net_device_init(void)
 {
-	/* Devices supporting the new probing API */
+	/* Devices supporting the new^H^H^Hold probing API */
 	network_probe();
-	/* Line disciplines */
-	network_ldisc_init();
 	/* Special devices */
 	special_device_init();
-	/* That kicks off the legacy init functions */
 }

drivers/net/skfp/skfddi.c

@@ -539,6 +539,8 @@ static void init_dev(struct net_device *dev, u_long iobase)
 	dev->header_cache_update = NULL;	/* not supported */
 	dev->change_mtu = NULL;	/* set in fddi_setup() */
 
+	SET_MODULE_OWNER(dev);
+
 	/* Initialize remaining device structure information */
 	fddi_setup(dev);
 }				// init_device
@@ -791,8 +793,6 @@ static int skfp_open(struct net_device *dev)
 	smt_online(smc, 1);
 	STI_FBI();
 
-	MOD_INC_USE_COUNT;
-
 	/* Clear local multicast address tables */
 	mac_clear_multicast(smc);
 
@@ -854,8 +854,6 @@ static int skfp_close(struct net_device *dev)
 		dev_kfree_skb(skb);
 	}
 
-	MOD_DEC_USE_COUNT;
-
 	return (0);
 }				// skfp_close
 

drivers/net/wan/dlci.c

@@ -37,6 +37,7 @@
 #include <linux/ptrace.h>
 #include <linux/ioport.h>
 #include <linux/in.h>
+#include <linux/init.h>
 #include <linux/slab.h>
 #include <linux/string.h>
 #include <linux/init.h>
@@ -577,9 +578,10 @@ int dlci_init(struct net_device *dev)
 	return(0);
 }
 
-int __init dlci_setup(void)
+int __init init_dlci(void)
 {
 	int i;
+	dlci_ioctl_set(dlci_ioctl);
 
 	printk("%s.\n", version);
 	
@@ -589,25 +591,16 @@ int __init dlci_setup(void)
 	for(i=0;i<sizeof(basename) / sizeof(char *);i++)
 		basename[i] = NULL;
 
-	return(0);
+	return 0;
 }
 
-#ifdef MODULE
-
-extern int (*dlci_ioctl_hook)(unsigned int, void *);
-
-int init_module(void)
+void __exit dlci_exit(void)
 {
-	dlci_ioctl_hook = dlci_ioctl;
-
-	return(dlci_setup());
+	dlci_ioctl_set(NULL);
 }
 
-void cleanup_module(void)
-{
-	dlci_ioctl_hook = NULL;
-}
-#endif /* MODULE */
+module_init(init_dlci);
+module_exit(dlci_exit);
 
 MODULE_AUTHOR("Mike McLagan");
 MODULE_DESCRIPTION("Frame Relay DLCI layer");

drivers/net/wan/x25_asy.c

@@ -46,8 +46,6 @@ int x25_asy_maxdev = SL_NRUNIT;		/* Can be overridden with insmod! */
 MODULE_PARM(x25_asy_maxdev, "i");
 MODULE_LICENSE("GPL");
 
-static struct tty_ldisc	x25_ldisc;
-
 static int x25_asy_esc(unsigned char *p, unsigned char *d, int len);
 static void x25_asy_unesc(struct x25_asy *sl, unsigned char c);
 
@@ -634,8 +632,6 @@ static int x25_asy_open_tty(struct tty_struct *tty)
 	if ((err = x25_asy_open(sl->dev)))
 		return err;
 
-	MOD_INC_USE_COUNT;
-
 	/* Done.  We have linked the TTY line to a channel. */
 	return sl->dev->base_addr;
 }
@@ -664,7 +660,6 @@ static void x25_asy_close_tty(struct tty_struct *tty)
 	sl->tty = NULL;
 	x25_asy_free(sl);
 	unregister_netdev(sl->dev);
-	MOD_DEC_USE_COUNT;
 }
 
 
@@ -769,32 +764,29 @@ static void x25_asy_unesc(struct x25_asy *sl, unsigned char s)
 
 
 /* Perform I/O control on an active X.25 channel. */
-static int x25_asy_ioctl(struct tty_struct *tty, void *file, int cmd, void *arg)
+static int x25_asy_ioctl(struct tty_struct *tty, struct file *file,
+			 unsigned int cmd,  unsigned long arg)
 {
 	struct x25_asy *sl = (struct x25_asy *) tty->disc_data;
 
 	/* First make sure we're connected. */
-	if (!sl || sl->magic != X25_ASY_MAGIC) {
+	if (!sl || sl->magic != X25_ASY_MAGIC)
 		return -EINVAL;
-	}
-
-	switch(cmd) 
-	{
-		case SIOCGIFNAME:
-			if(copy_to_user(arg, sl->dev->name, strlen(sl->dev->name) + 1))
-				return -EFAULT;
-			return 0;
-
-		case SIOCSIFHWADDR:
-			return -EINVAL;
 
-		/* Allow stty to read, but not set, the serial port */
-		case TCGETS:
-		case TCGETA:
-			return n_tty_ioctl(tty, (struct file *) file, cmd, (unsigned long) arg);
-
-		default:
-			return -ENOIOCTLCMD;
+	switch(cmd) {
+	case SIOCGIFNAME:
+		if (copy_to_user((void *)arg, sl->dev->name,
+					strlen(sl->dev->name) + 1))
+			return -EFAULT;
+		return 0;
+	case SIOCSIFHWADDR:
+		return -EINVAL;
+	/* Allow stty to read, but not set, the serial port */
+	case TCGETS:
+	case TCGETA:
+		return n_tty_ioctl(tty, file, cmd, arg);
+	default:
+		return -ENOIOCTLCMD;
 	}
 }
 
@@ -806,51 +798,7 @@ static int x25_asy_open_dev(struct net_device *dev)
 	return 0;
 }
 
-/* Initialize X.25 control device -- register X.25 line discipline */
-
-int __init x25_asy_init_ctrl_dev(void)
-{
-	int status;
-
-	if (x25_asy_maxdev < 4) x25_asy_maxdev = 4; /* Sanity */
-
-	printk(KERN_INFO "X.25 async: version 0.00 ALPHA (dynamic channels, max=%d).\n",
-		x25_asy_maxdev );
-	x25_asy_ctrls = (x25_asy_ctrl_t **) kmalloc(sizeof(void*)*x25_asy_maxdev, GFP_KERNEL);
-	if (x25_asy_ctrls == NULL)
-	{
-		printk("X25 async: Can't allocate x25_asy_ctrls[] array!  Uaargh! (-> No X.25 available)\n");
-		return -ENOMEM;
-	}
-
-	/* Clear the pointer array, we allocate devices when we need them */
-	memset(x25_asy_ctrls, 0, sizeof(void*)*x25_asy_maxdev); /* Pointers */
-
-	/* Fill in our line protocol discipline, and register it */
-	memset(&x25_ldisc, 0, sizeof(x25_ldisc));
-	x25_ldisc.magic  = TTY_LDISC_MAGIC;
-	x25_ldisc.name   = "X.25";
-	x25_ldisc.flags  = 0;
-	x25_ldisc.open   = x25_asy_open_tty;
-	x25_ldisc.close  = x25_asy_close_tty;
-	x25_ldisc.read   = NULL;
-	x25_ldisc.write  = NULL;
-	x25_ldisc.ioctl  = (int (*)(struct tty_struct *, struct file *,
-				   unsigned int, unsigned long)) x25_asy_ioctl;
-	x25_ldisc.poll   = NULL;
-	x25_ldisc.receive_buf = x25_asy_receive_buf;
-	x25_ldisc.receive_room = x25_asy_receive_room;
-	x25_ldisc.write_wakeup = x25_asy_write_wakeup;
-	if ((status = tty_register_ldisc(N_X25, &x25_ldisc)) != 0)  {
-		printk("X.25 async: can't register line discipline (err = %d)\n", status);
-	}
-
-	return status;
-}
-
-
 /* Initialise the X.25 driver.  Called by the device init code */
-
 int x25_asy_init(struct net_device *dev)
 {
 	struct x25_asy *sl = (struct x25_asy*)(dev->priv);
@@ -885,43 +833,58 @@ int x25_asy_init(struct net_device *dev)
 
 	return 0;
 }
-#ifdef MODULE
 
-int
-init_module(void)
+static struct tty_ldisc x25_ldisc = {
+	.owner		= THIS_MODULE,
+	.magic		= TTY_LDISC_MAGIC,
+	.name		= "X.25",
+	.open		= x25_asy_open_tty,
+	.close		= x25_asy_close_tty,
+	.ioctl		= x25_asy_ioctl,
+	.receive_buf	= x25_asy_receive_buf,
+	.receive_room	= x25_asy_receive_room,
+	.write_wakeup	= x25_asy_write_wakeup,
+};
+
+static int __init init_x25_asy(void)
 {
-	return x25_asy_init_ctrl_dev();
+	if (x25_asy_maxdev < 4)
+		x25_asy_maxdev = 4; /* Sanity */
+
+	printk(KERN_INFO "X.25 async: version 0.00 ALPHA "
+			"(dynamic channels, max=%d).\n", x25_asy_maxdev );
+	x25_asy_ctrls = kmalloc(sizeof(void*)*x25_asy_maxdev, GFP_KERNEL);
+	if (!x25_asy_ctrls) {
+		printk(KERN_WARNING "X25 async: Can't allocate x25_asy_ctrls[] "
+				"array! Uaargh! (-> No X.25 available)\n");
+		return -ENOMEM;
+	}
+	memset(x25_asy_ctrls, 0, sizeof(void*)*x25_asy_maxdev); /* Pointers */
+
+	return tty_register_ldisc(N_X25, &x25_ldisc);
 }
 
-void
-cleanup_module(void)
+
+static void __exit exit_x25_asy(void)
 {
 	int i;
 
-	if (x25_asy_ctrls != NULL)
-	{
-		for (i = 0; i < x25_asy_maxdev; i++)
-		{
-			if (x25_asy_ctrls[i])
-			{
-				/*
-				 * VSV = if dev->start==0, then device
-				 * unregistered while close proc.
-				 */
-				if (netif_running(&(x25_asy_ctrls[i]->dev)))
-					unregister_netdev(&(x25_asy_ctrls[i]->dev));
-
-				kfree(x25_asy_ctrls[i]);
-				x25_asy_ctrls[i] = NULL;
-			}
+	for (i = 0; i < x25_asy_maxdev; i++) {
+		if (x25_asy_ctrls[i]) {
+			/*
+			 * VSV = if dev->start==0, then device
+			 * unregistered while close proc.
+			 */
+			if (netif_running(&(x25_asy_ctrls[i]->dev)))
+				unregister_netdev(&(x25_asy_ctrls[i]->dev));
+
+			kfree(x25_asy_ctrls[i]);
 		}
-		kfree(x25_asy_ctrls);
-		x25_asy_ctrls = NULL;
-	}
-	if ((i = tty_register_ldisc(N_X25, NULL)))
-	{
-		printk("X.25 async: can't unregister line discipline (err = %d)\n", i);
 	}
+
+	kfree(x25_asy_ctrls);
+	tty_register_ldisc(N_X25, NULL);
 }
-#endif /* MODULE */
 
+module_init(init_x25_asy);
+module_exit(exit_x25_asy);

drivers/scsi/aic7xxx/aic7xxx_osm.h

@@ -768,7 +768,7 @@ ahc_done_unlock(struct ahc_softc *ahc, unsigned long *flags)
 }
 
 static __inline void
-ahc_list_lockinit()
+ahc_list_lockinit(void)
 {
 	spin_lock_init(&ahc_list_spinlock);
 }

drivers/scsi/aic7xxx/aic7xxx_pci.c

@@ -1958,8 +1958,7 @@ write_brdctl(struct ahc_softc *ahc, uint8_t value)
 }
 
 static uint8_t
-read_brdctl(ahc)
-	struct 	ahc_softc *ahc;
+read_brdctl(struct ahc_softc *ahc)
 {
 	uint8_t brdctl;
 	uint8_t value;

drivers/usb/Kconfig

@@ -91,5 +91,7 @@ source "drivers/usb/serial/Kconfig"
 
 source "drivers/usb/misc/Kconfig"
 
+source "drivers/usb/gadget/Kconfig"
+
 endmenu
 

drivers/usb/Makefile

@@ -58,3 +58,7 @@ obj-$(CONFIG_USB_SPEEDTOUCH)	+= misc/
 obj-$(CONFIG_USB_TEST)		+= misc/
 obj-$(CONFIG_USB_TIGL)		+= misc/
 obj-$(CONFIG_USB_USS720)	+= misc/
+
+obj-$(CONFIG_USB_NET2280)	+= gadget/
+obj-$(CONFIG_USB_ZERO)		+= gadget/
+obj-$(CONFIG_USB_ETH)		+= gadget/

drivers/usb/gadget/Kconfig

+#
+# USB Gadget support on a system involves
+#    (a) a peripheral controller, and
+#    (b) the gadget driver using it.
+#
+# for 2.5 kbuild, drivers/usb/gadget/Kconfig
+# source this at the end of drivers/usb/Kconfig
+#
+menuconfig USB_GADGET
+	tristate "Support for USB Gadgets"
+	depends on EXPERIMENTAL
+	help
+	   USB is a master/slave protocol, organized with with one master
+	   host (such as a PC) controlling up to 127 peripheral devices.
+	   The USB hardware is asymmetric, which makes it easier to set up:
+	   you can't connect two "to-the-host" connectors to each other.
+
+	   Linux can run in the host, or in the peripheral.  In both cases
+	   you need a low level bus controller driver, and some software
+	   talking to it.  Peripheral controllers are often discrete silicon,
+	   or are integrated with the CPU in a microcontroller.  The more
+	   familiar host side controllers have names like like "EHCI", "OHCI",
+	   or "UHCI", and are usually integrated into southbridges on PC
+	   motherboards.
+
+	   Enable this configuration option if you want to run Linux inside
+	   a USB peripheral device.  Configure one hardware driver for your
+	   peripheral/device side bus controller, and a "gadget driver" for
+	   your peripheral protocol.  (If you use modular gadget drivers,
+	   you may configure more than one.)
+
+	   If in doubt, say "N" and don't enable these drivers; most people
+	   don't have this kind of hardware (except maybe inside Linux PDAs).
+
+#
+# USB Peripheral Controller Support
+#
+# FIXME convert to tristate choice when "choice" behaves as specified
+#
+comment "USB Peripheral Controller Support"
+	depends on USB_GADGET
+
+config USB_NET2280
+	tristate "NetChip 2280 USB Peripheral Controller"
+	depends on PCI && USB_GADGET
+	help
+	   NetChip 2280 is a PCI based USB peripheral controller which
+	   supports both full and high speed USB 2.0 data transfers.  
+	   
+	   It has six configurable endpoints, as well as endpoint zero
+	   (for control transfers) and several endpoints with dedicated
+	   functions.
+
+	   Say "y" to link the driver statically, or "m" to build a
+	   dynamically linked module called "net2280" and force all
+	   gadget drivers to also be dynamically linked.
+
+#
+# USB Gadget Drivers
+#
+# FIXME only one of these may be statically linked; choice/endchoice.
+#
+comment "USB Gadget Drivers"
+	depends on USB_GADGET
+
+# FIXME want better dependency/config approach for drivers.  with only
+# two knobs to tweak (driver y/m/n, and a hardware symbol) there's no
+# good excuse for Kconfig to cause such trouble here.  there are clear
+# bugs (coredumps, multiple choices enabled, and more) in its (boolean)
+# "choice" logic too ...
+
+config USB_ZERO
+	tristate "Gadget Zero (DEVELOPMENT)"
+	depends on USB_GADGET && (USB_DUMMY_HCD || USB_NET2280 || USB_PXA250 || USB_SA1100)
+	help
+	  Gadget Zero is a two-configuration device.  It either sinks and
+	  sources bulk data; or it loops back a configurable number of
+	  transfers.  It also implements control requests, for "chapter 9"
+	  conformance.  The driver needs only two bulk-capable endpoints, so
+	  it can work on top of most device-side usb controllers.  It's
+	  useful for testing, and is also a working example showing how
+	  USB "gadget drivers" can be written.
+
+	  Make this be the first driver you try using on top of any new
+	  USB peripheral controller driver.  Then you can use host-side
+	  test software, like the "usbtest" driver, to put your hardware
+	  and its driver through a basic set of functional tests.
+
+	  Gadget Zero also works with the host-side "usb-skeleton" driver,
+	  and with many kinds of host-side test software.  You may need
+	  to tweak product and vendor IDs before host software knows about
+	  this device, and arrange to select an appropriate configuration.
+
+	  Say "y" to link the driver statically, or "m" to build a
+	  dynamically linked module called "g_zero".
+
+config USB_ZERO_NET2280
+	bool
+	# for now, treat the "dummy" hcd as if it were a net2280
+	depends on USB_ZERO && (USB_NET2280 || USB_DUMMY_HCD)
+	default y
+
+config USB_ZERO_PXA250
+	bool
+	depends on USB_ZERO && USB_PXA250
+	default y
+
+config USB_ZERO_SA1100
+	bool
+	depends on USB_ZERO && USB_SA1100
+	default y
+
+
+config USB_ETH
+	tristate "Ethernet Gadget"
+	depends on USB_GADGET && (USB_DUMMY_HCD || USB_NET2280 || USB_PXA250 || USB_SA1100)
+	help
+	  This driver implements the "Communication Device Class" (CDC)
+	  Ethernet Control Model.  That protocol is often avoided with pure
+	  Ethernet adapters, in favor of simpler vendor-specific hardware,
+	  but is widely supported by firmware for smart network devices.
+
+	  Within the USB device, this gadget driver exposes a network device
+	  "usbX", where X depends on what other networking devices you have.
+	  Treat it like a two-node Ethernet link:  host, and gadget.
+
+	  The Linux-USB host-side "usbnet" driver interoperates with this
+	  driver, so that deep I/O queues can be supported.  (On 2.4 kernels,
+	  use "CDCEther" instead.)  Deep queues are especially important with
+	  high speed devices.  It should also interoperate with standard CDC
+	  Ethernet class drivers on other host operating systems.
+
+	  Say "y" to link the driver statically, or "m" to build a
+	  dynamically linked module called "g_ether".
+
+
+config USB_ETH_NET2280
+	bool
+	# for now, treat the "dummy" hcd as if it were a net2280
+	depends on USB_ETH && (USB_NET2280 || USB_DUMMY_HCD)
+	default y
+
+config USB_ETH_PXA250
+	bool
+	depends on USB_ETH && USB_PXA250
+	default y
+
+config USB_ETH_SA1100
+	bool
+	depends on USB_ETH && USB_SA1100
+	default y
+
+# endmenuconfig

drivers/usb/gadget/Makefile

+#
+# USB peripheral controller drivers
+#
+obj-$(CONFIG_USB_NET2280)	+= net2280.o
+
+#
+# USB gadget drivers
+#
+g_zero-objs			:= zero.o usbstring.o
+g_ether-objs			:= ether.o usbstring.o
+ 
+obj-$(CONFIG_USB_ZERO)		+= g_zero.o
+obj-$(CONFIG_USB_ETH)		+= g_ether.o
+

drivers/usb/gadget/usbstring.c

+/*
+ * Copyright (C) 2003 David Brownell
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU Lesser General Public License as published
+ * by the Free Software Foundation; either version 2.1 of the License, or
+ * (at your option) any later version.
+ */
+
+#include <linux/errno.h>
+#include <linux/kernel.h>
+#include <linux/list.h>
+#include <linux/string.h>
+#include <linux/device.h>
+
+#include <linux/usb_ch9.h>
+#include <linux/usb_gadget.h>
+
+
+/**
+ * usb_gadget_get_string - fill out a string descriptor 
+ * @table: of c strings using iso latin/1 characters
+ * @id: string id, from low byte of wValue in get string descriptor
+ * @buf: at least 256 bytes
+ *
+ * Finds the iso latin/1 string matching the ID, and converts it into a
+ * string descriptor in utf16-le.
+ * Returns length of descriptor (always even) or negative errno
+ *
+ * If your driver needs stings in multiple languages, you'll need to
+ * to use some alternate solution for languages where the ISO 8859/1
+ * (latin/1) character set can't be used.  For example, they can't be
+ * used with Chinese (Big5, GB2312, etc), Japanese, Korean, or many other
+ * languages.  You'd likely "switch (wIndex) { ... }"  in your ep0
+ * string descriptor logic, using this routine in cases where "western
+ * european" characters suffice for the strings being returned.
+ */
+int
+usb_gadget_get_string (struct usb_gadget_strings *table, int id, u8 *buf)
+{
+	struct usb_string	*s;
+	int			len;
+
+	/* descriptor 0 has the language id */
+	if (id == 0) {
+		buf [0] = 4;
+		buf [1] = USB_DT_STRING;
+		buf [2] = (u8) table->language;
+		buf [3] = (u8) (table->language >> 8);
+		return 4;
+	}
+	for (s = table->strings; s && s->s; s++)
+		if (s->id == id)
+			break;
+
+	/* unrecognized: stall. */
+	if (!s || !s->s)
+		return -EINVAL;
+
+	/* string descriptors have length, tag, then UTF16-LE text */
+	len = min ((size_t) 126, strlen (s->s));
+	buf [0] = (len + 1) * 2;
+	buf [1] = USB_DT_STRING;
+	memset (buf + 2, 0, 2 * len);	/* zero all the high bytes */
+	while (len) {
+		buf [2 * len] = s->s [len - 1];
+		len--;
+	}
+	return buf [0];
+}
+

fs/bio.c

@@ -728,6 +728,7 @@ void bio_endio(struct bio *bio, unsigned int bytes_done, int error)
 	}
 
 	bio->bi_size -= bytes_done;
+	bio->bi_sector += (bytes_done >> 9);
 
 	if (bio->bi_end_io)
 		bio->bi_end_io(bio, bytes_done, error);

include/asm-i386/i387.h

@@ -87,15 +87,15 @@ extern int restore_i387( struct _fpstate __user *buf );
 /*
  * ptrace request handers...
  */
-extern int get_fpregs( struct user_i387_struct *buf,
+extern int get_fpregs( struct user_i387_struct __user *buf,
 		       struct task_struct *tsk );
 extern int set_fpregs( struct task_struct *tsk,
-		       struct user_i387_struct *buf );
+		       struct user_i387_struct __user *buf );
 
-extern int get_fpxregs( struct user_fxsr_struct *buf,
+extern int get_fpxregs( struct user_fxsr_struct __user *buf,
 			struct task_struct *tsk );
 extern int set_fpxregs( struct task_struct *tsk,
-			struct user_fxsr_struct *buf );
+			struct user_fxsr_struct __user *buf );
 
 /*
  * FPU state for core dumps...