Commit 23a1f8d4 authored by Sara Sharon's avatar Sara Sharon Committed by Johannes Berg

mac80211: process and save VHT MU-MIMO group frame

The Group ID Management frame is an Action frame of
category VHT. It is transmitted by the AP to assign
or change the user position of a STA for one or more
group IDs.
Process and save the group membership data. Notify
underlying driver of changes.
Signed-off-by: default avatarSara Sharon <sara.sharon@intel.com>
Signed-off-by: default avatarEmmanuel Grumbach <emmanuel.grumbach@intel.com>
Signed-off-by: default avatarJohannes Berg <johannes.berg@intel.com>
parent c799ba6e
......@@ -843,6 +843,8 @@ enum ieee80211_vht_opmode_bits {
};
#define WLAN_SA_QUERY_TR_ID_LEN 2
#define WLAN_MEMBERSHIP_LEN 8
#define WLAN_USER_POSITION_LEN 16
/**
* struct ieee80211_tpc_report_ie
......@@ -989,6 +991,11 @@ struct ieee80211_mgmt {
u8 action_code;
u8 operating_mode;
} __packed vht_opmode_notif;
struct {
u8 action_code;
u8 membership[WLAN_MEMBERSHIP_LEN];
u8 position[WLAN_USER_POSITION_LEN];
} __packed vht_group_notif;
struct {
u8 action_code;
u8 dialog_token;
......
......@@ -298,6 +298,7 @@ struct ieee80211_vif_chanctx_switch {
* note that this is only called when it changes after the channel
* context had been assigned.
* @BSS_CHANGED_OCB: OCB join status changed
* @BSS_CHANGED_MU_GROUPS: VHT MU-MIMO group id or user position changed
*/
enum ieee80211_bss_change {
BSS_CHANGED_ASSOC = 1<<0,
......@@ -323,6 +324,7 @@ enum ieee80211_bss_change {
BSS_CHANGED_BEACON_INFO = 1<<20,
BSS_CHANGED_BANDWIDTH = 1<<21,
BSS_CHANGED_OCB = 1<<22,
BSS_CHANGED_MU_GROUPS = 1<<23,
/* when adding here, make sure to change ieee80211_reconfig */
};
......@@ -435,6 +437,19 @@ struct ieee80211_event {
} u;
};
/**
* struct ieee80211_mu_group_data - STA's VHT MU-MIMO group data
*
* This structure describes the group id data of VHT MU-MIMO
*
* @membership: 64 bits array - a bit is set if station is member of the group
* @position: 2 bits per group id indicating the position in the group
*/
struct ieee80211_mu_group_data {
u8 membership[WLAN_MEMBERSHIP_LEN];
u8 position[WLAN_USER_POSITION_LEN];
};
/**
* struct ieee80211_bss_conf - holds the BSS's changing parameters
*
......@@ -477,6 +492,7 @@ struct ieee80211_event {
* @enable_beacon: whether beaconing should be enabled or not
* @chandef: Channel definition for this BSS -- the hardware might be
* configured a higher bandwidth than this BSS uses, for example.
* @mu_group: VHT MU-MIMO group membership data
* @ht_operation_mode: HT operation mode like in &struct ieee80211_ht_operation.
* This field is only valid when the channel is a wide HT/VHT channel.
* Note that with TDLS this can be the case (channel is HT, protection must
......@@ -535,6 +551,7 @@ struct ieee80211_bss_conf {
s32 cqm_rssi_thold;
u32 cqm_rssi_hyst;
struct cfg80211_chan_def chandef;
struct ieee80211_mu_group_data mu_group;
__be32 arp_addr_list[IEEE80211_BSS_ARP_ADDR_LIST_LEN];
int arp_addr_cnt;
bool qos;
......
......@@ -1714,6 +1714,8 @@ ieee80211_vht_cap_ie_to_sta_vht_cap(struct ieee80211_sub_if_data *sdata,
enum ieee80211_sta_rx_bandwidth ieee80211_sta_cap_rx_bw(struct sta_info *sta);
enum ieee80211_sta_rx_bandwidth ieee80211_sta_cur_vht_bw(struct sta_info *sta);
void ieee80211_sta_set_rx_nss(struct sta_info *sta);
void ieee80211_process_mu_groups(struct ieee80211_sub_if_data *sdata,
struct ieee80211_mgmt *mgmt);
u32 __ieee80211_vht_handle_opmode(struct ieee80211_sub_if_data *sdata,
struct sta_info *sta, u8 opmode,
enum ieee80211_band band);
......
......@@ -1271,6 +1271,16 @@ static void ieee80211_iface_work(struct work_struct *work)
}
}
mutex_unlock(&local->sta_mtx);
} else if (ieee80211_is_action(mgmt->frame_control) &&
mgmt->u.action.category == WLAN_CATEGORY_VHT) {
switch (mgmt->u.action.u.vht_group_notif.action_code) {
case WLAN_VHT_ACTION_GROUPID_MGMT:
ieee80211_process_mu_groups(sdata, mgmt);
break;
default:
WARN_ON(1);
break;
}
} else if (ieee80211_is_data_qos(mgmt->frame_control)) {
struct ieee80211_hdr *hdr = (void *)mgmt;
/*
......
......@@ -2079,6 +2079,13 @@ static void ieee80211_set_disassoc(struct ieee80211_sub_if_data *sdata,
memset(&ifmgd->ht_capa_mask, 0, sizeof(ifmgd->ht_capa_mask));
memset(&ifmgd->vht_capa, 0, sizeof(ifmgd->vht_capa));
memset(&ifmgd->vht_capa_mask, 0, sizeof(ifmgd->vht_capa_mask));
/* reset MU-MIMO ownership and group data */
memset(sdata->vif.bss_conf.mu_group.membership, 0,
sizeof(sdata->vif.bss_conf.mu_group.membership));
memset(sdata->vif.bss_conf.mu_group.position, 0,
sizeof(sdata->vif.bss_conf.mu_group.position));
changed |= BSS_CHANGED_MU_GROUPS;
sdata->flags &= ~IEEE80211_SDATA_MU_MIMO_OWNER;
sdata->ap_power_level = IEEE80211_UNSET_POWER_LEVEL;
......
......@@ -2738,6 +2738,11 @@ ieee80211_rx_h_action(struct ieee80211_rx_data *rx)
opmode, status->band);
goto handled;
}
case WLAN_VHT_ACTION_GROUPID_MGMT: {
if (len < IEEE80211_MIN_ACTION_SIZE + 25)
goto invalid;
goto queue;
}
default:
break;
}
......
......@@ -1928,6 +1928,9 @@ int ieee80211_reconfig(struct ieee80211_local *local)
BSS_CHANGED_IDLE |
BSS_CHANGED_TXPOWER;
if (sdata->flags & IEEE80211_SDATA_MU_MIMO_OWNER)
changed |= BSS_CHANGED_MU_GROUPS;
switch (sdata->vif.type) {
case NL80211_IFTYPE_STATION:
changed |= BSS_CHANGED_ASSOC |
......
/*
* VHT handling
*
* Portions of this file
* Copyright(c) 2015 Intel Deutschland GmbH
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License version 2 as
* published by the Free Software Foundation.
......@@ -425,6 +428,28 @@ u32 __ieee80211_vht_handle_opmode(struct ieee80211_sub_if_data *sdata,
return changed;
}
void ieee80211_process_mu_groups(struct ieee80211_sub_if_data *sdata,
struct ieee80211_mgmt *mgmt)
{
struct ieee80211_bss_conf *bss_conf = &sdata->vif.bss_conf;
if (!(sdata->flags & IEEE80211_SDATA_MU_MIMO_OWNER))
return;
if (!memcmp(mgmt->u.action.u.vht_group_notif.position,
bss_conf->mu_group.position, WLAN_USER_POSITION_LEN) &&
!memcmp(mgmt->u.action.u.vht_group_notif.membership,
bss_conf->mu_group.membership, WLAN_MEMBERSHIP_LEN))
return;
memcpy(mgmt->u.action.u.vht_group_notif.membership,
bss_conf->mu_group.membership, WLAN_MEMBERSHIP_LEN);
memcpy(mgmt->u.action.u.vht_group_notif.position,
bss_conf->mu_group.position, WLAN_USER_POSITION_LEN);
ieee80211_bss_info_change_notify(sdata, BSS_CHANGED_MU_GROUPS);
}
void ieee80211_vht_handle_opmode(struct ieee80211_sub_if_data *sdata,
struct sta_info *sta, u8 opmode,
enum ieee80211_band band)
......
Markdown is supported
0%
or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment