Commit 23c74bf5 authored by Tony Lindgren's avatar Tony Lindgren

ARM: dts: Add basic support for isee igepv5

With omap5-board-common.dtsi, we can now easily add support for various omap5
board variants. Let's add minimal support for isee igepv5.

So far I've tested that basic things work, such as serial, USB Ethernet, HDMI
and WLAN.

Note that like omap5-uevm, these boards seem to need to reserve 16MB for a
trap section as in commit 03178c66 ("ARM: dts: omap5-evm: Update
available memory to 2032 MB") and also noted in a u-boot commit at
http://marc.info/?l=u-boot&m=134376852603255 and also at
http://patchwork.ozlabs.org/patch/159881/.

Not sure why this is not needed for omap5-cm-t54.dts, maybe because of
different u-boot configuration.
Signed-off-by: default avatarTony Lindgren <tony@atomide.com>
parent ee9a97db
......@@ -471,6 +471,7 @@ dtb-$(CONFIG_SOC_AM43XX) += \
am437x-gp-evm.dtb
dtb-$(CONFIG_SOC_OMAP5) += \
omap5-cm-t54.dtb \
omap5-igep0050.dtb \
omap5-sbc-t54.dtb \
omap5-uevm.dtb
dtb-$(CONFIG_SOC_DRA7XX) += \
......
/*
* Copyright (C) 2013 ISEE 2007 SL - http://www.isee.biz/
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License version 2 as
* published by the Free Software Foundation.
*/
/dts-v1/;
#include "omap5-board-common.dtsi"
/ {
model = "IGEPv5";
compatible = "isee,omap5-igep0050", "ti,omap5";
memory {
device_type = "memory";
reg = <0x80000000 0x7f000000>; /* 2032 MB */
};
};
&hdmi {
vdda-supply = <&ldo7_reg>;
};
&i2c4 {
pinctrl-names = "default";
pinctrl-0 = <&i2c4_pins>;
tca6416: tca6416@21 {
compatible = "ti,tca6416";
reg = <0x21>;
gpio-controller;
#gpio-cells = <2>;
};
};
&omap5_pmx_core {
i2c4_pins: pinmux_i2c4_pins {
pinctrl-single,pins = <
OMAP5_IOPAD(0x0f8, PIN_INPUT | MUX_MODE0) /* i2c4_scl */
OMAP5_IOPAD(0x0fa, PIN_INPUT | MUX_MODE0) /* i2c4_sda */
>;
};
};
&tpd12s015 {
gpios = <&tca6416 11 0>, /* TCA6416 P01, CT_CP_HDP */
<&tca6416 12 0>, /* TCA6416 P00, LS_OE*/
<&gpio7 1 0>, /* 193, HPD */
<&gpio7 2 0>, /* 194, SCL */
<&gpio7 3 0>; /* 195, SDA */
};
Markdown is supported
0%
or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment