ARM: dts: realview: support all the RealView EB board variants

The ARM RealView Evaluation Baseboards are basically these:

- The original ARMv5 EB board with an ARM926EJ-S, ARM1136 or
  ARM1176 core tile here described in arm-realview-eb.dts
  no matter which of these core tiles is being used. This
  can be emulated by QEMU "realview-eb" machine, which by
  default will have the ARM926EJ-S core tile.

- The same board with one of three MPCore Core tiles:
  ARM11MPCore, not to be confused with the similar ARM
  PB11MPCore ARM11MPCore test system. This exist in
  two revisions:
  - Revision A modeled in arm-realview-eb-11mp.dts
  - Revision B modeled arm-realview-eb-11mp-revb.dts
    Revision B can be emulated by the QEMU
    "realview-eb-mpcore" machine, but to match the hardware
    also the argument -smp cpus=4 must be passed so that
    it has four CPU cores, like the hardware.

  There is also evidently from the code in the kernel a
  Cortex-A9 core tile for the EB, and this is modeled in
  arm-realview-eb-a9mp.dts based on the kernel boardfile.
  I have not found a user guide for this EB core tile on
  the ARM website and it seems uncommon. It is however
  included for completeness.

Cc: Pawel Moll <pawel.moll@arm.com>
Cc: Peter Maydell <peter.maydell@linaro.org>
Cc: Marc Zyngier <marc.zyngier@arm.com>
Acked-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>

arch/arm/boot/dts/Makefile

@@ -552,7 +552,11 @@ dtb-$(CONFIG_ARCH_QCOM) += \
 	qcom-msm8974-sony-xperia-honami.dtb
 dtb-$(CONFIG_ARCH_REALVIEW) += \
 	arm-realview-pb1176.dtb \
-	arm-realview-pb11mp.dtb
+	arm-realview-pb11mp.dtb \
+	arm-realview-eb.dtb \
+	arm-realview-eb-11mp.dtb \
+	arm-realview-eb-11mp-revb.dtb \
+	arm-realview-eb-a9mp.dtb
 dtb-$(CONFIG_ARCH_ROCKCHIP) += \
 	rk3036-evb.dtb \
 	rk3036-kylin.dtb \

arch/arm/boot/dts/arm-realview-eb-11mp-revb.dts

+/*
+ * Copyright 2016 Linaro Ltd
+ *
+ * Permission is hereby granted, free of charge, to any person obtaining a copy
+ * of this software and associated documentation files (the "Software"), to deal
+ * in the Software without restriction, including without limitation the rights
+ * to use, copy, modify, merge, publish, distribute, sublicense, and/or sell
+ * copies of the Software, and to permit persons to whom the Software is
+ * furnished to do so, subject to the following conditions:
+ *
+ * The above copyright notice and this permission notice shall be included in
+ * all copies or substantial portions of the Software.
+ *
+ * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR
+ * IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY,
+ * FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL
+ * THE AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER
+ * LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM,
+ * OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN
+ * THE SOFTWARE.
+ */
+
+#include "arm-realview-eb-11mp.dts"
+
+/ {
+	model = "ARM RealView Emulation Baseboard with ARM11MPCore Rev B";
+};
+
+/*
+ * The revision B has a distinctly different layout of the syscon, so
+ * append a specific compatible-string.
+ */
+&syscon {
+	compatible = "arm,realview-eb11mp-revb-syscon", "arm,realview-eb-syscon", "syscon", "simple-mfd";
+};
+
+&intc {
+	reg = <0x10101000 0x1000>,
+	      <0x10100100 0x100>;
+};
+
+&L2 {
+	reg = <0x10102000 0x1000>;
+};
+
+&scu {
+	reg = <0x10100000 0x100>;
+};
+
+&twd_timer {
+	reg = <0x10100600 0x20>;
+};
+
+&twd_wdog {
+	reg = <0x10100620 0x20>;
+};
+
+/*
+ * On revision B, we cannot reach the secondary interrupt
+ * controller, as a result, some peripherals that are dependent
+ * on their IRQ cannot be reached, so disable them.
+ */
+&intc_second {
+	status = "disabled";
+};
+
+&gpio0 {
+	status = "disabled";
+};
+
+&gpio1 {
+	status = "disabled";
+};
+
+&gpio2 {
+	status = "disabled";
+};
+
+&serial2 {
+	status = "disabled";
+};
+
+&serial3 {
+	status = "disabled";
+};
+
+&ssp {
+	status = "disabled";
+};
+
+&wdog {
+	status = "disabled";
+};

arch/arm/boot/dts/arm-realview-eb-11mp.dts

+/*
+ * Copyright 2016 Linaro Ltd
+ *
+ * Permission is hereby granted, free of charge, to any person obtaining a copy
+ * of this software and associated documentation files (the "Software"), to deal
+ * in the Software without restriction, including without limitation the rights
+ * to use, copy, modify, merge, publish, distribute, sublicense, and/or sell
+ * copies of the Software, and to permit persons to whom the Software is
+ * furnished to do so, subject to the following conditions:
+ *
+ * The above copyright notice and this permission notice shall be included in
+ * all copies or substantial portions of the Software.
+ *
+ * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR
+ * IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY,
+ * FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL
+ * THE AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER
+ * LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM,
+ * OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN
+ * THE SOFTWARE.
+ */
+
+/dts-v1/;
+#include "arm-realview-eb-mp.dtsi"
+
+/ {
+	model = "ARM RealView Emulation Baseboard with ARM11MPCore Rev C";
+	arm,hbi = <0x146>;
+
+	/*
+	 * This is the ARM11 MPCore tile (HBI-0146) used with the RealView EB.
+	 * Reference: ARM DUI 0318F
+	 *
+	 * To run this machine with QEMU, specify the following:
+	 * qemu-system-arm -M realview-eb-mpcore -smp cpus=4
+	 */
+	cpus {
+		#address-cells = <1>;
+		#size-cells = <0>;
+		enable-method = "arm,realview-smp";
+
+		MP11_0: cpu@0 {
+			device_type = "cpu";
+			compatible = "arm,arm11mpcore";
+			reg = <0>;
+			next-level-cache = <&L2>;
+		};
+
+		MP11_1: cpu@1 {
+			device_type = "cpu";
+			compatible = "arm,arm11mpcore";
+			reg = <1>;
+			next-level-cache = <&L2>;
+		};
+
+		MP11_2: cpu@2 {
+			device_type = "cpu";
+			compatible = "arm,arm11mpcore";
+			reg = <2>;
+			next-level-cache = <&L2>;
+		};
+
+		MP11_3: cpu@3 {
+			device_type = "cpu";
+			compatible = "arm,arm11mpcore";
+			reg = <3>;
+			next-level-cache = <&L2>;
+		};
+	};
+};
+
+&pmu {
+	interrupt-affinity = <&MP11_0>, <&MP11_1>, <&MP11_2>, <&MP11_3>;
+};

arch/arm/boot/dts/arm-realview-eb-a9mp.dts

+/*
+ * Copyright 2016 Linaro Ltd
+ *
+ * Permission is hereby granted, free of charge, to any person obtaining a copy
+ * of this software and associated documentation files (the "Software"), to deal
+ * in the Software without restriction, including without limitation the rights
+ * to use, copy, modify, merge, publish, distribute, sublicense, and/or sell
+ * copies of the Software, and to permit persons to whom the Software is
+ * furnished to do so, subject to the following conditions:
+ *
+ * The above copyright notice and this permission notice shall be included in
+ * all copies or substantial portions of the Software.
+ *
+ * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR
+ * IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY,
+ * FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL
+ * THE AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER
+ * LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM,
+ * OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN
+ * THE SOFTWARE.
+ */
+
+/dts-v1/;
+#include "arm-realview-eb-mp.dtsi"
+
+/ {
+	model = "ARM RealView EB Cortex A9 MPCore";
+
+	/*
+	 * This is the Cortex A9 MPCore tile used with the
+	 * RealView EB.
+	 */
+	cpus {
+		#address-cells = <1>;
+		#size-cells = <0>;
+		enable-method = "arm,realview-smp";
+
+		A9_0: cpu@0 {
+			device_type = "cpu";
+			compatible = "arm,cortex-a9";
+			reg = <0>;
+			next-level-cache = <&L2>;
+		};
+
+		A9_1: cpu@1 {
+			device_type = "cpu";
+			compatible = "arm,cortex-a9";
+			reg = <1>;
+			next-level-cache = <&L2>;
+		};
+
+		A9_2: cpu@2 {
+			device_type = "cpu";
+			compatible = "arm,cortex-a9";
+			reg = <2>;
+			next-level-cache = <&L2>;
+		};
+
+		A9_3: cpu@3 {
+			device_type = "cpu";
+			compatible = "arm,cortex-a9";
+			reg = <3>;
+			next-level-cache = <&L2>;
+		};
+	};
+};
+
+&pmu {
+	interrupt-affinity = <&A9_0>, <&A9_1>, <&A9_2>, <&A9_3>;
+};

arch/arm/boot/dts/arm-realview-eb-mp.dtsi

+/*
+ * Copyright 2016 Linaro Ltd
+ *
+ * Permission is hereby granted, free of charge, to any person obtaining a copy
+ * of this software and associated documentation files (the "Software"), to deal
+ * in the Software without restriction, including without limitation the rights
+ * to use, copy, modify, merge, publish, distribute, sublicense, and/or sell
+ * copies of the Software, and to permit persons to whom the Software is
+ * furnished to do so, subject to the following conditions:
+ *
+ * The above copyright notice and this permission notice shall be included in
+ * all copies or substantial portions of the Software.
+ *
+ * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR
+ * IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY,
+ * FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL
+ * THE AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER
+ * LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM,
+ * OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN
+ * THE SOFTWARE.
+ */
+
+#include <dt-bindings/interrupt-controller/irq.h>
+#include <dt-bindings/gpio/gpio.h>
+#include "arm-realview-eb.dtsi"
+
+/*
+ * This is the common include file for all MPCore variants of the
+ * Evaluation Baseboard, i.e. ARM11MPCore, ARM11MPCore Revision B
+ * and Cortex-A9 MPCore.
+ */
+/ {
+	soc {
+		#address-cells = <1>;
+		#size-cells = <1>;
+		compatible = "arm,realview-eb-soc", "simple-bus";
+		regmap = <&syscon>;
+		ranges;
+
+		/* Primary interrupt controller in the test chip */
+		intc: interrupt-controller@1f000100 {
+			compatible = "arm,eb11mp-gic";
+			#interrupt-cells = <3>;
+			#address-cells = <1>;
+			interrupt-controller;
+			reg = <0x1f001000 0x1000>,
+			      <0x1f000100 0x100>;
+		};
+
+		/* Secondary interrupt controller on the FPGA */
+		intc_second: interrupt-controller@10040000 {
+			compatible = "arm,pl390";
+			#interrupt-cells = <3>;
+			#address-cells = <1>;
+			interrupt-controller;
+			reg = <0x10041000 0x1000>,
+			      <0x10040000 0x100>;
+			interrupt-parent = <&intc>;
+			interrupts = <0 10 IRQ_TYPE_LEVEL_HIGH>;
+		};
+
+		L2: l2-cache {
+			compatible = "arm,l220-cache";
+			reg = <0x1f002000 0x1000>;
+			interrupt-parent = <&intc>;
+			interrupts = <0 29 IRQ_TYPE_LEVEL_HIGH>,
+			     <0 30 IRQ_TYPE_LEVEL_HIGH>,
+			     <0 31 IRQ_TYPE_LEVEL_HIGH>;
+			cache-unified;
+			cache-level = <2>;
+			/*
+			 * Override default cache size, sets and
+			 * associativity as these may be erroneously set
+			 * up by boot loader(s), probably for safety
+			 * since th outer sync operation can cause the
+			 * cache to hang unless disabled.
+			 */
+			cache-size = <1048576>; // 1MB
+			cache-sets = <4096>;
+			cache-line-size = <32>;
+			arm,shared-override;
+			arm,parity-enable;
+			arm,outer-sync-disable;
+		};
+
+		scu: scu@1f000000 {
+			compatible = "arm,arm11mp-scu";
+			reg = <0x1f000000 0x100>;
+		};
+
+		twd_timer: timer@1f000600 {
+			compatible = "arm,arm11mp-twd-timer";
+			reg = <0x1f000600 0x20>;
+			interrupt-parent = <&intc>;
+			interrupts = <1 13 0xf04>;
+		};
+
+		twd_wdog: watchdog@1f000620 {
+			compatible = "arm,arm11mp-twd-wdt";
+			reg = <0x1f000620 0x20>;
+			interrupt-parent = <&intc>;
+			interrupts = <1 14 0xf04>;
+		};
+
+		/* PMU with one IRQ line per core */
+		pmu: pmu@0 {
+			compatible = "arm,arm11mpcore-pmu";
+			interrupt-parent = <&intc>;
+			interrupts = <0 17 IRQ_TYPE_LEVEL_HIGH>,
+			     <0 18 IRQ_TYPE_LEVEL_HIGH>,
+			     <0 19 IRQ_TYPE_LEVEL_HIGH>,
+			     <0 20 IRQ_TYPE_LEVEL_HIGH>;
+		};
+	};
+};
+
+/*
+ * This adapts all the peripherals to the interrupt routing
+ * to the GIC on the core tile.
+ */
+
+&ethernet {
+	interrupt-parent = <&intc>;
+	interrupts = <0 9 IRQ_TYPE_LEVEL_HIGH>;
+};
+
+&usb {
+	interrupt-parent = <&intc>;
+	interrupts = <0 3 IRQ_TYPE_LEVEL_HIGH>;
+};
+
+&aaci {
+	interrupt-parent = <&intc>;
+	interrupts = <0 0 IRQ_TYPE_LEVEL_HIGH>;
+};
+
+&mmc {
+	interrupt-parent = <&intc>;
+	interrupts = <0 14 IRQ_TYPE_LEVEL_HIGH>,
+			<0 15 IRQ_TYPE_LEVEL_HIGH>;
+};
+
+&kmi0 {
+	interrupt-parent = <&intc>;
+	interrupts = <0 7 IRQ_TYPE_LEVEL_HIGH>;
+};
+
+&kmi1 {
+	interrupt-parent = <&intc>;
+	interrupts = <0 8 IRQ_TYPE_LEVEL_HIGH>;
+};
+
+&charlcd {
+	interrupt-parent = <&intc>;
+	interrupts = <0  IRQ_TYPE_LEVEL_HIGH>;
+};
+
+&serial0 {
+	interrupt-parent = <&intc>;
+	interrupts = <0 4 IRQ_TYPE_LEVEL_HIGH>;
+};
+
+&serial1 {
+	interrupt-parent = <&intc>;
+	interrupts = <0 5 IRQ_TYPE_LEVEL_HIGH>;
+};
+
+&timer01 {
+	interrupt-parent = <&intc>;
+	interrupts = <0 1 IRQ_TYPE_LEVEL_HIGH>;
+};
+
+&timer23 {
+	interrupt-parent = <&intc>;
+	interrupts = <0 2 IRQ_TYPE_LEVEL_HIGH>;
+};
+
+&rtc {
+	interrupt-parent = <&intc>;
+	interrupts = <0 6 IRQ_TYPE_LEVEL_HIGH>;
+};
+
+/*
+ * On revision A, these peripherals does not have their IRQ lines
+ * routed to the core tile, but they can be reached on the secondary
+ * GIC.
+ */
+&gpio0 {
+	interrupt-parent = <&intc_second>;
+	interrupts = <0 6 IRQ_TYPE_LEVEL_HIGH>;
+};
+
+&gpio1 {
+	interrupt-parent = <&intc_second>;
+	interrupts = <0 7 IRQ_TYPE_LEVEL_HIGH>;
+};
+
+&gpio2 {
+	interrupt-parent = <&intc_second>;
+	interrupts = <0 8 IRQ_TYPE_LEVEL_HIGH>;
+};
+
+&serial2 {
+	interrupt-parent = <&intc_second>;
+	interrupts = <0 14 IRQ_TYPE_LEVEL_HIGH>;
+	status = "okay";
+};
+
+&serial3 {
+	interrupt-parent = <&intc_second>;
+	interrupts = <0 15 IRQ_TYPE_LEVEL_HIGH>;
+	status = "okay";
+};
+
+&ssp {
+	interrupt-parent = <&intc_second>;
+	interrupts = <0 11 IRQ_TYPE_LEVEL_HIGH>;
+	status = "okay";
+};
+
+&wdog {
+	interrupt-parent = <&intc_second>;
+	interrupts = <0 0 IRQ_TYPE_LEVEL_HIGH>;
+	status = "okay";
+};

arch/arm/boot/dts/arm-realview-eb.dts

+/*
+ * Copyright 2016 Linaro Ltd
+ *
+ * Permission is hereby granted, free of charge, to any person obtaining a copy
+ * of this software and associated documentation files (the "Software"), to deal
+ * in the Software without restriction, including without limitation the rights
+ * to use, copy, modify, merge, publish, distribute, sublicense, and/or sell
+ * copies of the Software, and to permit persons to whom the Software is
+ * furnished to do so, subject to the following conditions:
+ *
+ * The above copyright notice and this permission notice shall be included in
+ * all copies or substantial portions of the Software.
+ *
+ * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR
+ * IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY,
+ * FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL
+ * THE AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER
+ * LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM,
+ * OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN
+ * THE SOFTWARE.
+ */
+
+/dts-v1/;
+#include <dt-bindings/interrupt-controller/irq.h>
+#include <dt-bindings/gpio/gpio.h>
+#include "arm-realview-eb.dtsi"
+
+/ {
+	model = "ARM RealView Emulation Baseboard";
+	compatible = "arm,realview-eb";
+	arm,hbi = <0x140>;
+
+	/*
+	 * This is the core tile with the CPU and GIC etc for the
+	 * ARM926EJ-S, ARM1136, ARM1176 that does not have L2 cache
+	 * or PMU.
+	 *
+	 * To run this machine with QEMU, specify the following:
+	 * qemu-system-arm -M realview-eb
+	 * Unless specified, QEMU will emulate an ARM926EJ-S core tile.
+	 * Switches -cpu arm1136 or -cpu arm1176 emulates the other
+	 * core tiles.
+	 */
+	soc {
+		#address-cells = <1>;
+		#size-cells = <1>;
+		compatible = "arm,realview-eb-soc", "simple-bus";
+		regmap = <&syscon>;
+		ranges;
+
+		intc: interrupt-controller@10040000 {
+			compatible = "arm,pl390";
+			#interrupt-cells = <3>;
+			#address-cells = <1>;
+			interrupt-controller;
+			reg = <0x10041000 0x1000>,
+			      <0x10040000 0x100>;
+		};
+	};
+};
+
+/*
+ * This adapts all the peripherals to the interrupt routing
+ * to the GIC on the core tile.
+ */
+
+&ethernet {
+	interrupt-parent = <&intc>;
+	interrupts = <0 28 IRQ_TYPE_LEVEL_HIGH>;
+};
+
+&usb {
+	interrupt-parent = <&intc>;
+	interrupts = <0 29 IRQ_TYPE_LEVEL_HIGH>;
+};
+
+&aaci {
+	interrupt-parent = <&intc>;
+	interrupts = <0 19 IRQ_TYPE_LEVEL_HIGH>;
+};
+
+&mmc {
+	interrupt-parent = <&intc>;
+	interrupts = <0 17 IRQ_TYPE_LEVEL_HIGH>,
+			<0 18 IRQ_TYPE_LEVEL_HIGH>;
+};
+
+&kmi0 {
+	interrupt-parent = <&intc>;
+	interrupts = <0 20 IRQ_TYPE_LEVEL_HIGH>;
+};
+
+&kmi1 {
+	interrupt-parent = <&intc>;
+	interrupts = <0 21 IRQ_TYPE_LEVEL_HIGH>;
+};
+
+&charlcd {
+	interrupt-parent = <&intc>;
+	interrupts = <0 22 IRQ_TYPE_LEVEL_HIGH>;
+};
+
+&serial0 {
+	interrupt-parent = <&intc>;
+	interrupts = <0 12 IRQ_TYPE_LEVEL_HIGH>;
+};
+
+&serial1 {
+	interrupt-parent = <&intc>;
+	interrupts = <0 13 IRQ_TYPE_LEVEL_HIGH>;
+};
+
+&serial2 {
+	interrupt-parent = <&intc>;
+	interrupts = <0 14 IRQ_TYPE_LEVEL_HIGH>;
+};
+
+&serial3 {
+	interrupt-parent = <&intc>;
+	interrupts = <0 15 IRQ_TYPE_LEVEL_HIGH>;
+};
+
+&ssp {
+	interrupt-parent = <&intc>;
+	interrupts = <0 11 IRQ_TYPE_LEVEL_HIGH>;
+};
+
+&wdog {
+	interrupt-parent = <&intc>;
+	interrupts = <0 0 IRQ_TYPE_LEVEL_HIGH>;
+};
+
+&timer01 {
+	interrupt-parent = <&intc>;
+	interrupts = <0 4 IRQ_TYPE_LEVEL_HIGH>;
+};
+
+&timer23 {
+	interrupt-parent = <&intc>;
+	interrupts = <0 5 IRQ_TYPE_LEVEL_HIGH>;
+};
+
+&gpio0 {
+	interrupt-parent = <&intc>;
+	interrupts = <0 6 IRQ_TYPE_LEVEL_HIGH>;
+};
+
+&gpio1 {
+	interrupt-parent = <&intc>;
+	interrupts = <0 7 IRQ_TYPE_LEVEL_HIGH>;
+};
+
+&gpio2 {
+	interrupt-parent = <&intc>;
+	interrupts = <0 8 IRQ_TYPE_LEVEL_HIGH>;
+};
+
+&rtc {
+	interrupt-parent = <&intc>;
+	interrupts = <0 10 IRQ_TYPE_LEVEL_HIGH>;
+};
+
+&clcd {
+	interrupt-parent = <&intc>;
+	interrupts = <0 23 IRQ_TYPE_LEVEL_HIGH>;
+};