Commit 247055aa authored by Catalin Marinas's avatar Catalin Marinas Committed by Russell King

ARM: 6384/1: Remove the domain switching on ARMv6k/v7 CPUs

This patch removes the domain switching functionality via the set_fs and
__switch_to functions on cores that have a TLS register.

Currently, the ioremap and vmalloc areas share the same level 1 page
tables and therefore have the same domain (DOMAIN_KERNEL). When the
kernel domain is modified from Client to Manager (via the __set_fs or in
the __switch_to function), the XN (eXecute Never) bit is overridden and
newer CPUs can speculatively prefetch the ioremap'ed memory.

Linux performs the kernel domain switching to allow user-specific
functions (copy_to/from_user, get/put_user etc.) to access kernel
memory. In order for these functions to work with the kernel domain set
to Client, the patch modifies the LDRT/STRT and related instructions to
the LDR/STR ones.

The user pages access rights are also modified for kernel read-only
access rather than read/write so that the copy-on-write mechanism still
works. CPU_USE_DOMAINS gets disabled only if the hardware has a TLS register
(CPU_32v6K is defined) since writing the TLS value to the high vectors page
isn't possible.

The user addresses passed to the kernel are checked by the access_ok()
function so that they do not point to the kernel space.
Tested-by: default avatarAnton Vorontsov <cbouatmailru@gmail.com>
Cc: Tony Lindgren <tony@atomide.com>
Signed-off-by: default avatarCatalin Marinas <catalin.marinas@arm.com>
Signed-off-by: default avatarRussell King <rmk+kernel@arm.linux.org.uk>
parent ff8b16d7
......@@ -18,6 +18,7 @@
#endif
#include <asm/ptrace.h>
#include <asm/domain.h>
/*
* Endian independent macros for shifting bytes within registers.
......@@ -206,12 +207,12 @@
*/
#ifdef CONFIG_THUMB2_KERNEL
.macro usraccoff, instr, reg, ptr, inc, off, cond, abort
.macro usraccoff, instr, reg, ptr, inc, off, cond, abort, t=T()
9999:
.if \inc == 1
\instr\cond\()bt \reg, [\ptr, #\off]
\instr\cond\()b\()\t\().w \reg, [\ptr, #\off]
.elseif \inc == 4
\instr\cond\()t \reg, [\ptr, #\off]
\instr\cond\()\t\().w \reg, [\ptr, #\off]
.else
.error "Unsupported inc macro argument"
.endif
......@@ -246,13 +247,13 @@
#else /* !CONFIG_THUMB2_KERNEL */
.macro usracc, instr, reg, ptr, inc, cond, rept, abort
.macro usracc, instr, reg, ptr, inc, cond, rept, abort, t=T()
.rept \rept
9999:
.if \inc == 1
\instr\cond\()bt \reg, [\ptr], #\inc
\instr\cond\()b\()\t \reg, [\ptr], #\inc
.elseif \inc == 4
\instr\cond\()t \reg, [\ptr], #\inc
\instr\cond\()\t \reg, [\ptr], #\inc
.else
.error "Unsupported inc macro argument"
.endif
......
......@@ -45,13 +45,17 @@
*/
#define DOMAIN_NOACCESS 0
#define DOMAIN_CLIENT 1
#ifdef CONFIG_CPU_USE_DOMAINS
#define DOMAIN_MANAGER 3
#else
#define DOMAIN_MANAGER 1
#endif
#define domain_val(dom,type) ((type) << (2*(dom)))
#ifndef __ASSEMBLY__
#ifdef CONFIG_MMU
#ifdef CONFIG_CPU_USE_DOMAINS
#define set_domain(x) \
do { \
__asm__ __volatile__( \
......@@ -74,5 +78,28 @@
#define modify_domain(dom,type) do { } while (0)
#endif
/*
* Generate the T (user) versions of the LDR/STR and related
* instructions (inline assembly)
*/
#ifdef CONFIG_CPU_USE_DOMAINS
#define T(instr) #instr "t"
#else
#define T(instr) #instr
#endif
#endif /* !__ASSEMBLY__ */
#else /* __ASSEMBLY__ */
/*
* Generate the T (user) versions of the LDR/STR and related
* instructions
*/
#ifdef CONFIG_CPU_USE_DOMAINS
#define T(instr) instr ## t
#else
#define T(instr) instr
#endif
#endif /* __ASSEMBLY__ */
#endif /* !__ASM_PROC_DOMAIN_H */
......@@ -13,12 +13,13 @@
#include <linux/preempt.h>
#include <linux/uaccess.h>
#include <asm/errno.h>
#include <asm/domain.h>
#define __futex_atomic_op(insn, ret, oldval, uaddr, oparg) \
__asm__ __volatile__( \
"1: ldrt %1, [%2]\n" \
"1: " T(ldr) " %1, [%2]\n" \
" " insn "\n" \
"2: strt %0, [%2]\n" \
"2: " T(str) " %0, [%2]\n" \
" mov %0, #0\n" \
"3:\n" \
" .pushsection __ex_table,\"a\"\n" \
......@@ -97,10 +98,10 @@ futex_atomic_cmpxchg_inatomic(int __user *uaddr, int oldval, int newval)
pagefault_disable(); /* implies preempt_disable() */
__asm__ __volatile__("@futex_atomic_cmpxchg_inatomic\n"
"1: ldrt %0, [%3]\n"
"1: " T(ldr) " %0, [%3]\n"
" teq %0, %1\n"
" it eq @ explicit IT needed for the 2b label\n"
"2: streqt %2, [%3]\n"
"2: " T(streq) " %2, [%3]\n"
"3:\n"
" .pushsection __ex_table,\"a\"\n"
" .align 3\n"
......
......@@ -27,4 +27,6 @@ static inline int in_exception_text(unsigned long ptr)
extern void __init early_trap_init(void);
extern void dump_backtrace_entry(unsigned long where, unsigned long from, unsigned long frame);
extern void *vectors_page;
#endif
......@@ -227,7 +227,7 @@ do { \
#define __get_user_asm_byte(x,addr,err) \
__asm__ __volatile__( \
"1: ldrbt %1,[%2]\n" \
"1: " T(ldrb) " %1,[%2],#0\n" \
"2:\n" \
" .pushsection .fixup,\"ax\"\n" \
" .align 2\n" \
......@@ -263,7 +263,7 @@ do { \
#define __get_user_asm_word(x,addr,err) \
__asm__ __volatile__( \
"1: ldrt %1,[%2]\n" \
"1: " T(ldr) " %1,[%2],#0\n" \
"2:\n" \
" .pushsection .fixup,\"ax\"\n" \
" .align 2\n" \
......@@ -308,7 +308,7 @@ do { \
#define __put_user_asm_byte(x,__pu_addr,err) \
__asm__ __volatile__( \
"1: strbt %1,[%2]\n" \
"1: " T(strb) " %1,[%2],#0\n" \
"2:\n" \
" .pushsection .fixup,\"ax\"\n" \
" .align 2\n" \
......@@ -341,7 +341,7 @@ do { \
#define __put_user_asm_word(x,__pu_addr,err) \
__asm__ __volatile__( \
"1: strt %1,[%2]\n" \
"1: " T(str) " %1,[%2],#0\n" \
"2:\n" \
" .pushsection .fixup,\"ax\"\n" \
" .align 2\n" \
......@@ -366,10 +366,10 @@ do { \
#define __put_user_asm_dword(x,__pu_addr,err) \
__asm__ __volatile__( \
ARM( "1: strt " __reg_oper1 ", [%1], #4\n" ) \
ARM( "2: strt " __reg_oper0 ", [%1]\n" ) \
THUMB( "1: strt " __reg_oper1 ", [%1]\n" ) \
THUMB( "2: strt " __reg_oper0 ", [%1, #4]\n" ) \
ARM( "1: " T(str) " " __reg_oper1 ", [%1], #4\n" ) \
ARM( "2: " T(str) " " __reg_oper0 ", [%1]\n" ) \
THUMB( "1: " T(str) " " __reg_oper1 ", [%1]\n" ) \
THUMB( "2: " T(str) " " __reg_oper0 ", [%1, #4]\n" ) \
"3:\n" \
" .pushsection .fixup,\"ax\"\n" \
" .align 2\n" \
......
......@@ -735,7 +735,7 @@ ENTRY(__switch_to)
THUMB( stmia ip!, {r4 - sl, fp} ) @ Store most regs on stack
THUMB( str sp, [ip], #4 )
THUMB( str lr, [ip], #4 )
#ifdef CONFIG_MMU
#ifdef CONFIG_CPU_USE_DOMAINS
ldr r6, [r2, #TI_CPU_DOMAIN]
#endif
set_tls r3, r4, r5
......@@ -744,7 +744,7 @@ ENTRY(__switch_to)
ldr r8, =__stack_chk_guard
ldr r7, [r7, #TSK_STACK_CANARY]
#endif
#ifdef CONFIG_MMU
#ifdef CONFIG_CPU_USE_DOMAINS
mcr p15, 0, r6, c3, c0, 0 @ Set domain register
#endif
mov r5, r0
......
......@@ -45,6 +45,7 @@
#include <asm/fiq.h>
#include <asm/irq.h>
#include <asm/system.h>
#include <asm/traps.h>
static unsigned long no_fiq_insn;
......@@ -77,7 +78,11 @@ int show_fiq_list(struct seq_file *p, void *v)
void set_fiq_handler(void *start, unsigned int length)
{
#if defined(CONFIG_CPU_USE_DOMAINS)
memcpy((void *)0xffff001c, start, length);
#else
memcpy(vectors_page + 0x1c, start, length);
#endif
flush_icache_range(0xffff001c, 0xffff001c + length);
if (!vectors_high())
flush_icache_range(0x1c, 0x1c + length);
......
......@@ -37,6 +37,8 @@
static const char *handler[]= { "prefetch abort", "data abort", "address exception", "interrupt" };
void *vectors_page;
#ifdef CONFIG_DEBUG_USER
unsigned int user_debug;
......@@ -759,7 +761,11 @@ static void __init kuser_get_tls_init(unsigned long vectors)
void __init early_trap_init(void)
{
#if defined(CONFIG_CPU_USE_DOMAINS)
unsigned long vectors = CONFIG_VECTORS_BASE;
#else
unsigned long vectors = (unsigned long)vectors_page;
#endif
extern char __stubs_start[], __stubs_end[];
extern char __vectors_start[], __vectors_end[];
extern char __kuser_helper_start[], __kuser_helper_end[];
......@@ -783,10 +789,10 @@ void __init early_trap_init(void)
* Copy signal return handlers into the vector page, and
* set sigreturn to be a pointer to these.
*/
memcpy((void *)KERN_SIGRETURN_CODE, sigreturn_codes,
sizeof(sigreturn_codes));
memcpy((void *)KERN_RESTART_CODE, syscall_restart_code,
sizeof(syscall_restart_code));
memcpy((void *)(vectors + KERN_SIGRETURN_CODE - CONFIG_VECTORS_BASE),
sigreturn_codes, sizeof(sigreturn_codes));
memcpy((void *)(vectors + KERN_RESTART_CODE - CONFIG_VECTORS_BASE),
syscall_restart_code, sizeof(syscall_restart_code));
flush_icache_range(vectors, vectors + PAGE_SIZE);
modify_domain(DOMAIN_USER, DOMAIN_CLIENT);
......
......@@ -28,20 +28,21 @@
*/
#include <linux/linkage.h>
#include <asm/errno.h>
#include <asm/domain.h>
ENTRY(__get_user_1)
1: ldrbt r2, [r0]
1: T(ldrb) r2, [r0]
mov r0, #0
mov pc, lr
ENDPROC(__get_user_1)
ENTRY(__get_user_2)
#ifdef CONFIG_THUMB2_KERNEL
2: ldrbt r2, [r0]
3: ldrbt r3, [r0, #1]
2: T(ldrb) r2, [r0]
3: T(ldrb) r3, [r0, #1]
#else
2: ldrbt r2, [r0], #1
3: ldrbt r3, [r0]
2: T(ldrb) r2, [r0], #1
3: T(ldrb) r3, [r0]
#endif
#ifndef __ARMEB__
orr r2, r2, r3, lsl #8
......@@ -53,7 +54,7 @@ ENTRY(__get_user_2)
ENDPROC(__get_user_2)
ENTRY(__get_user_4)
4: ldrt r2, [r0]
4: T(ldr) r2, [r0]
mov r0, #0
mov pc, lr
ENDPROC(__get_user_4)
......
......@@ -28,9 +28,10 @@
*/
#include <linux/linkage.h>
#include <asm/errno.h>
#include <asm/domain.h>
ENTRY(__put_user_1)
1: strbt r2, [r0]
1: T(strb) r2, [r0]
mov r0, #0
mov pc, lr
ENDPROC(__put_user_1)
......@@ -39,19 +40,19 @@ ENTRY(__put_user_2)
mov ip, r2, lsr #8
#ifdef CONFIG_THUMB2_KERNEL
#ifndef __ARMEB__
2: strbt r2, [r0]
3: strbt ip, [r0, #1]
2: T(strb) r2, [r0]
3: T(strb) ip, [r0, #1]
#else
2: strbt ip, [r0]
3: strbt r2, [r0, #1]
2: T(strb) ip, [r0]
3: T(strb) r2, [r0, #1]
#endif
#else /* !CONFIG_THUMB2_KERNEL */
#ifndef __ARMEB__
2: strbt r2, [r0], #1
3: strbt ip, [r0]
2: T(strb) r2, [r0], #1
3: T(strb) ip, [r0]
#else
2: strbt ip, [r0], #1
3: strbt r2, [r0]
2: T(strb) ip, [r0], #1
3: T(strb) r2, [r0]
#endif
#endif /* CONFIG_THUMB2_KERNEL */
mov r0, #0
......@@ -59,18 +60,18 @@ ENTRY(__put_user_2)
ENDPROC(__put_user_2)
ENTRY(__put_user_4)
4: strt r2, [r0]
4: T(str) r2, [r0]
mov r0, #0
mov pc, lr
ENDPROC(__put_user_4)
ENTRY(__put_user_8)
#ifdef CONFIG_THUMB2_KERNEL
5: strt r2, [r0]
6: strt r3, [r0, #4]
5: T(str) r2, [r0]
6: T(str) r3, [r0, #4]
#else
5: strt r2, [r0], #4
6: strt r3, [r0]
5: T(str) r2, [r0], #4
6: T(str) r3, [r0]
#endif
mov r0, #0
mov pc, lr
......
......@@ -14,6 +14,7 @@
#include <linux/linkage.h>
#include <asm/assembler.h>
#include <asm/errno.h>
#include <asm/domain.h>
.text
......@@ -31,11 +32,11 @@
rsb ip, ip, #4
cmp ip, #2
ldrb r3, [r1], #1
USER( strbt r3, [r0], #1) @ May fault
USER( T(strb) r3, [r0], #1) @ May fault
ldrgeb r3, [r1], #1
USER( strgebt r3, [r0], #1) @ May fault
USER( T(strgeb) r3, [r0], #1) @ May fault
ldrgtb r3, [r1], #1
USER( strgtbt r3, [r0], #1) @ May fault
USER( T(strgtb) r3, [r0], #1) @ May fault
sub r2, r2, ip
b .Lc2u_dest_aligned
......@@ -58,7 +59,7 @@ ENTRY(__copy_to_user)
addmi ip, r2, #4
bmi .Lc2u_0nowords
ldr r3, [r1], #4
USER( strt r3, [r0], #4) @ May fault
USER( T(str) r3, [r0], #4) @ May fault
mov ip, r0, lsl #32 - PAGE_SHIFT @ On each page, use a ld/st??t instruction
rsb ip, ip, #0
movs ip, ip, lsr #32 - PAGE_SHIFT
......@@ -87,18 +88,18 @@ USER( strt r3, [r0], #4) @ May fault
stmneia r0!, {r3 - r4} @ Shouldnt fault
tst ip, #4
ldrne r3, [r1], #4
strnet r3, [r0], #4 @ Shouldnt fault
T(strne) r3, [r0], #4 @ Shouldnt fault
ands ip, ip, #3
beq .Lc2u_0fupi
.Lc2u_0nowords: teq ip, #0
beq .Lc2u_finished
.Lc2u_nowords: cmp ip, #2
ldrb r3, [r1], #1
USER( strbt r3, [r0], #1) @ May fault
USER( T(strb) r3, [r0], #1) @ May fault
ldrgeb r3, [r1], #1
USER( strgebt r3, [r0], #1) @ May fault
USER( T(strgeb) r3, [r0], #1) @ May fault
ldrgtb r3, [r1], #1
USER( strgtbt r3, [r0], #1) @ May fault
USER( T(strgtb) r3, [r0], #1) @ May fault
b .Lc2u_finished
.Lc2u_not_enough:
......@@ -119,7 +120,7 @@ USER( strgtbt r3, [r0], #1) @ May fault
mov r3, r7, pull #8
ldr r7, [r1], #4
orr r3, r3, r7, push #24
USER( strt r3, [r0], #4) @ May fault
USER( T(str) r3, [r0], #4) @ May fault
mov ip, r0, lsl #32 - PAGE_SHIFT
rsb ip, ip, #0
movs ip, ip, lsr #32 - PAGE_SHIFT
......@@ -154,18 +155,18 @@ USER( strt r3, [r0], #4) @ May fault
movne r3, r7, pull #8
ldrne r7, [r1], #4
orrne r3, r3, r7, push #24
strnet r3, [r0], #4 @ Shouldnt fault
T(strne) r3, [r0], #4 @ Shouldnt fault
ands ip, ip, #3
beq .Lc2u_1fupi
.Lc2u_1nowords: mov r3, r7, get_byte_1
teq ip, #0
beq .Lc2u_finished
cmp ip, #2
USER( strbt r3, [r0], #1) @ May fault
USER( T(strb) r3, [r0], #1) @ May fault
movge r3, r7, get_byte_2
USER( strgebt r3, [r0], #1) @ May fault
USER( T(strgeb) r3, [r0], #1) @ May fault
movgt r3, r7, get_byte_3
USER( strgtbt r3, [r0], #1) @ May fault
USER( T(strgtb) r3, [r0], #1) @ May fault
b .Lc2u_finished
.Lc2u_2fupi: subs r2, r2, #4
......@@ -174,7 +175,7 @@ USER( strgtbt r3, [r0], #1) @ May fault
mov r3, r7, pull #16
ldr r7, [r1], #4
orr r3, r3, r7, push #16
USER( strt r3, [r0], #4) @ May fault
USER( T(str) r3, [r0], #4) @ May fault
mov ip, r0, lsl #32 - PAGE_SHIFT
rsb ip, ip, #0
movs ip, ip, lsr #32 - PAGE_SHIFT
......@@ -209,18 +210,18 @@ USER( strt r3, [r0], #4) @ May fault
movne r3, r7, pull #16
ldrne r7, [r1], #4
orrne r3, r3, r7, push #16
strnet r3, [r0], #4 @ Shouldnt fault
T(strne) r3, [r0], #4 @ Shouldnt fault
ands ip, ip, #3
beq .Lc2u_2fupi
.Lc2u_2nowords: mov r3, r7, get_byte_2
teq ip, #0
beq .Lc2u_finished
cmp ip, #2
USER( strbt r3, [r0], #1) @ May fault
USER( T(strb) r3, [r0], #1) @ May fault
movge r3, r7, get_byte_3
USER( strgebt r3, [r0], #1) @ May fault
USER( T(strgeb) r3, [r0], #1) @ May fault
ldrgtb r3, [r1], #0
USER( strgtbt r3, [r0], #1) @ May fault
USER( T(strgtb) r3, [r0], #1) @ May fault
b .Lc2u_finished
.Lc2u_3fupi: subs r2, r2, #4
......@@ -229,7 +230,7 @@ USER( strgtbt r3, [r0], #1) @ May fault
mov r3, r7, pull #24
ldr r7, [r1], #4
orr r3, r3, r7, push #8
USER( strt r3, [r0], #4) @ May fault
USER( T(str) r3, [r0], #4) @ May fault
mov ip, r0, lsl #32 - PAGE_SHIFT
rsb ip, ip, #0
movs ip, ip, lsr #32 - PAGE_SHIFT
......@@ -264,18 +265,18 @@ USER( strt r3, [r0], #4) @ May fault
movne r3, r7, pull #24
ldrne r7, [r1], #4
orrne r3, r3, r7, push #8
strnet r3, [r0], #4 @ Shouldnt fault
T(strne) r3, [r0], #4 @ Shouldnt fault
ands ip, ip, #3
beq .Lc2u_3fupi
.Lc2u_3nowords: mov r3, r7, get_byte_3
teq ip, #0
beq .Lc2u_finished
cmp ip, #2
USER( strbt r3, [r0], #1) @ May fault
USER( T(strb) r3, [r0], #1) @ May fault
ldrgeb r3, [r1], #1
USER( strgebt r3, [r0], #1) @ May fault
USER( T(strgeb) r3, [r0], #1) @ May fault
ldrgtb r3, [r1], #0
USER( strgtbt r3, [r0], #1) @ May fault
USER( T(strgtb) r3, [r0], #1) @ May fault
b .Lc2u_finished
ENDPROC(__copy_to_user)
......@@ -294,11 +295,11 @@ ENDPROC(__copy_to_user)
.Lcfu_dest_not_aligned:
rsb ip, ip, #4
cmp ip, #2
USER( ldrbt r3, [r1], #1) @ May fault
USER( T(ldrb) r3, [r1], #1) @ May fault
strb r3, [r0], #1
USER( ldrgebt r3, [r1], #1) @ May fault
USER( T(ldrgeb) r3, [r1], #1) @ May fault
strgeb r3, [r0], #1
USER( ldrgtbt r3, [r1], #1) @ May fault
USER( T(ldrgtb) r3, [r1], #1) @ May fault
strgtb r3, [r0], #1
sub r2, r2, ip
b .Lcfu_dest_aligned
......@@ -321,7 +322,7 @@ ENTRY(__copy_from_user)
.Lcfu_0fupi: subs r2, r2, #4
addmi ip, r2, #4
bmi .Lcfu_0nowords
USER( ldrt r3, [r1], #4)
USER( T(ldr) r3, [r1], #4)
str r3, [r0], #4
mov ip, r1, lsl #32 - PAGE_SHIFT @ On each page, use a ld/st??t instruction
rsb ip, ip, #0
......@@ -350,18 +351,18 @@ USER( ldrt r3, [r1], #4)
ldmneia r1!, {r3 - r4} @ Shouldnt fault
stmneia r0!, {r3 - r4}
tst ip, #4
ldrnet r3, [r1], #4 @ Shouldnt fault
T(ldrne) r3, [r1], #4 @ Shouldnt fault
strne r3, [r0], #4
ands ip, ip, #3
beq .Lcfu_0fupi
.Lcfu_0nowords: teq ip, #0
beq .Lcfu_finished
.Lcfu_nowords: cmp ip, #2
USER( ldrbt r3, [r1], #1) @ May fault
USER( T(ldrb) r3, [r1], #1) @ May fault
strb r3, [r0], #1
USER( ldrgebt r3, [r1], #1) @ May fault
USER( T(ldrgeb) r3, [r1], #1) @ May fault
strgeb r3, [r0], #1
USER( ldrgtbt r3, [r1], #1) @ May fault
USER( T(ldrgtb) r3, [r1], #1) @ May fault
strgtb r3, [r0], #1
b .Lcfu_finished
......@@ -374,7 +375,7 @@ USER( ldrgtbt r3, [r1], #1) @ May fault
.Lcfu_src_not_aligned:
bic r1, r1, #3
USER( ldrt r7, [r1], #4) @ May fault
USER( T(ldr) r7, [r1], #4) @ May fault
cmp ip, #2
bgt .Lcfu_3fupi
beq .Lcfu_2fupi
......@@ -382,7 +383,7 @@ USER( ldrt r7, [r1], #4) @ May fault
addmi ip, r2, #4
bmi .Lcfu_1nowords
mov r3, r7, pull #8
USER( ldrt r7, [r1], #4) @ May fault
USER( T(ldr) r7, [r1], #4) @ May fault
orr r3, r3, r7, push #24
str r3, [r0], #4
mov ip, r1, lsl #32 - PAGE_SHIFT
......@@ -417,7 +418,7 @@ USER( ldrt r7, [r1], #4) @ May fault
stmneia r0!, {r3 - r4}
tst ip, #4
movne r3, r7, pull #8
USER( ldrnet r7, [r1], #4) @ May fault
USER( T(ldrne) r7, [r1], #4) @ May fault
orrne r3, r3, r7, push #24
strne r3, [r0], #4
ands ip, ip, #3
......@@ -437,7 +438,7 @@ USER( ldrnet r7, [r1], #4) @ May fault
addmi ip, r2, #4
bmi .Lcfu_2nowords
mov r3, r7, pull #16
USER( ldrt r7, [r1], #4) @ May fault
USER( T(ldr) r7, [r1], #4) @ May fault
orr r3, r3, r7, push #16
str r3, [r0], #4
mov ip, r1, lsl #32 - PAGE_SHIFT
......@@ -473,7 +474,7 @@ USER( ldrt r7, [r1], #4) @ May fault
stmneia r0!, {r3 - r4}
tst ip, #4
movne r3, r7, pull #16
USER( ldrnet r7, [r1], #4) @ May fault
USER( T(ldrne) r7, [r1], #4) @ May fault
orrne r3, r3, r7, push #16
strne r3, [r0], #4
ands ip, ip, #3
......@@ -485,7 +486,7 @@ USER( ldrnet r7, [r1], #4) @ May fault
strb r3, [r0], #1
movge r3, r7, get_byte_3
strgeb r3, [r0], #1
USER( ldrgtbt r3, [r1], #0) @ May fault
USER( T(ldrgtb) r3, [r1], #0) @ May fault
strgtb r3, [r0], #1
b .Lcfu_finished
......@@ -493,7 +494,7 @@ USER( ldrgtbt r3, [r1], #0) @ May fault
addmi ip, r2, #4
bmi .Lcfu_3nowords
mov r3, r7, pull #24
USER( ldrt r7, [r1], #4) @ May fault
USER( T(ldr) r7, [r1], #4) @ May fault
orr r3, r3, r7, push #8
str r3, [r0], #4
mov ip, r1, lsl #32 - PAGE_SHIFT
......@@ -528,7 +529,7 @@ USER( ldrt r7, [r1], #4) @ May fault
stmneia r0!, {r3 - r4}
tst ip, #4
movne r3, r7, pull #24
USER( ldrnet r7, [r1], #4) @ May fault
USER( T(ldrne) r7, [r1], #4) @ May fault
orrne r3, r3, r7, push #8
strne r3, [r0], #4
ands ip, ip, #3
......@@ -538,9 +539,9 @@ USER( ldrnet r7, [r1], #4) @ May fault
beq .Lcfu_finished
cmp ip, #2
strb r3, [r0], #1
USER( ldrgebt r3, [r1], #1) @ May fault
USER( T(ldrgeb) r3, [r1], #1) @ May fault
strgeb r3, [r0], #1
USER( ldrgtbt r3, [r1], #1) @ May fault
USER( T(ldrgtb) r3, [r1], #1) @ May fault
strgtb r3, [r0], #1
b .Lcfu_finished
ENDPROC(__copy_from_user)
......
......@@ -599,6 +599,14 @@ config CPU_CP15_MPU
help
Processor has the CP15 register, which has MPU related registers.
config CPU_USE_DOMAINS
bool
depends on MMU
default y if !CPU_32v6K
help
This option enables or disables the use of domain switching
via the set_fs() function.
#
# CPU supports 36-bit I/O
#
......
......@@ -24,6 +24,7 @@
#include <asm/smp_plat.h>
#include <asm/tlb.h>
#include <asm/highmem.h>
#include <asm/traps.h>
#include <asm/mach/arch.h>
#include <asm/mach/map.h>
......@@ -914,12 +915,11 @@ static void __init devicemaps_init(struct machine_desc *mdesc)
{
struct map_desc map;
unsigned long addr;
void *vectors;
/*
* Allocate the vector page early.
*/
vectors = early_alloc(PAGE_SIZE);
vectors_page = early_alloc(PAGE_SIZE);
for (addr = VMALLOC_END; addr; addr += PGDIR_SIZE)
pmd_clear(pmd_off_k(addr));
......@@ -959,7 +959,7 @@ static void __init devicemaps_init(struct machine_desc *mdesc)
* location (0xffff0000). If we aren't using high-vectors, also
* create a mapping at the low-vectors virtual address.
*/
map.pfn = __phys_to_pfn(virt_to_phys(vectors));
map.pfn = __phys_to_pfn(virt_to_phys(vectors_page));
map.virtual = 0xffff0000;
map.length = PAGE_SIZE;
map.type = MT_HIGH_VECTORS;
......
......@@ -99,6 +99,10 @@
* 110x 0 1 0 r/w r/o
* 11x0 0 1 0 r/w r/o
* 1111 0 1 1 r/w r/w
*
* If !CONFIG_CPU_USE_DOMAINS, the following permissions are changed:
* 110x 1 1 1 r/o r/o
* 11x0 1 1 1 r/o r/o
*/
.macro armv6_mt_table pfx
\pfx\()_mt_table:
......@@ -138,8 +142,11 @@
tst r1, #L_PTE_USER
orrne r3, r3, #PTE_EXT_AP1
#ifdef CONFIG_CPU_USE_DOMAINS
@ allow kernel read/write access to read-only user pages
tstne r3, #PTE_EXT_APX
bicne r3, r3, #PTE_EXT_APX | PTE_EXT_AP0
#endif
tst r1, #L_PTE_EXEC
orreq r3, r3, #PTE_EXT_XN
......
......@@ -148,8 +148,11 @@ ENTRY(cpu_v7_set_pte_ext)
tst r1, #L_PTE_USER
orrne r3, r3, #PTE_EXT_AP1
#ifdef CONFIG_CPU_USE_DOMAINS
@ allow kernel read/write access to read-only user pages
tstne r3, #PTE_EXT_APX
bicne r3, r3, #PTE_EXT_APX | PTE_EXT_AP0
#endif
tst r1, #L_PTE_EXEC
orreq r3, r3, #PTE_EXT_XN
......@@ -273,8 +276,6 @@ __v7_setup:
ALT_SMP(orr r4, r4, #TTB_FLAGS_SMP)
ALT_UP(orr r4, r4, #TTB_FLAGS_UP)
mcr p15, 0, r4, c2, c0, 1 @ load TTB1
mov r10, #0x1f @ domains 0, 1 = manager
mcr p15, 0, r10, c3, c0, 0 @ load domain access register
/*
* Memory region attributes with SCTLR.TRE=1
*
......
Markdown is supported
0%
or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment