Commit 24cf0e69 authored by Russell King's avatar Russell King Committed by David S. Miller

net: phylink: split link_an_mode configured and current settings

Split link_an_mode between the configured setting and the current
operating setting.  This is an important distinction to make when we
need to configure PHY mode for a plugged SFP+ module that does not
use in-band signalling.
Reviewed-by: default avatarAndrew Lunn <andrew@lunn.ch>
Signed-off-by: default avatarRussell King <rmk+kernel@armlinux.org.uk>
Signed-off-by: default avatarDavid S. Miller <davem@davemloft.net>
parent e45d1f52
......@@ -48,7 +48,8 @@ struct phylink {
unsigned long phylink_disable_state; /* bitmask of disables */
struct phy_device *phydev;
phy_interface_t link_interface; /* PHY_INTERFACE_xxx */
u8 link_an_mode; /* MLO_AN_xxx */
u8 cfg_link_an_mode; /* MLO_AN_xxx */
u8 cur_link_an_mode;
u8 link_port; /* The current non-phy ethtool port */
__ETHTOOL_DECLARE_LINK_MODE_MASK(supported);
......@@ -256,12 +257,12 @@ static int phylink_parse_mode(struct phylink *pl, struct fwnode_handle *fwnode)
dn = fwnode_get_named_child_node(fwnode, "fixed-link");
if (dn || fwnode_property_present(fwnode, "fixed-link"))
pl->link_an_mode = MLO_AN_FIXED;
pl->cfg_link_an_mode = MLO_AN_FIXED;
fwnode_handle_put(dn);
if (fwnode_property_read_string(fwnode, "managed", &managed) == 0 &&
strcmp(managed, "in-band-status") == 0) {
if (pl->link_an_mode == MLO_AN_FIXED) {
if (pl->cfg_link_an_mode == MLO_AN_FIXED) {
phylink_err(pl,
"can't use both fixed-link and in-band-status\n");
return -EINVAL;
......@@ -273,7 +274,7 @@ static int phylink_parse_mode(struct phylink *pl, struct fwnode_handle *fwnode)
phylink_set(pl->supported, Asym_Pause);
phylink_set(pl->supported, Pause);
pl->link_config.an_enabled = true;
pl->link_an_mode = MLO_AN_INBAND;
pl->cfg_link_an_mode = MLO_AN_INBAND;
switch (pl->link_config.interface) {
case PHY_INTERFACE_MODE_SGMII:
......@@ -333,14 +334,14 @@ static void phylink_mac_config(struct phylink *pl,
{
phylink_dbg(pl,
"%s: mode=%s/%s/%s/%s adv=%*pb pause=%02x link=%u an=%u\n",
__func__, phylink_an_mode_str(pl->link_an_mode),
__func__, phylink_an_mode_str(pl->cur_link_an_mode),
phy_modes(state->interface),
phy_speed_to_str(state->speed),
phy_duplex_to_str(state->duplex),
__ETHTOOL_LINK_MODE_MASK_NBITS, state->advertising,
state->pause, state->link, state->an_enabled);
pl->ops->mac_config(pl->config, pl->link_an_mode, state);
pl->ops->mac_config(pl->config, pl->cur_link_an_mode, state);
}
static void phylink_mac_config_up(struct phylink *pl,
......@@ -441,7 +442,7 @@ static void phylink_mac_link_up(struct phylink *pl,
struct net_device *ndev = pl->netdev;
pl->cur_interface = link_state.interface;
pl->ops->mac_link_up(pl->config, pl->link_an_mode,
pl->ops->mac_link_up(pl->config, pl->cur_link_an_mode,
pl->phy_state.interface,
pl->phydev);
......@@ -461,7 +462,7 @@ static void phylink_mac_link_down(struct phylink *pl)
if (ndev)
netif_carrier_off(ndev);
pl->ops->mac_link_down(pl->config, pl->link_an_mode,
pl->ops->mac_link_down(pl->config, pl->cur_link_an_mode,
pl->cur_interface);
phylink_info(pl, "Link is Down\n");
}
......@@ -480,7 +481,7 @@ static void phylink_resolve(struct work_struct *w)
} else if (pl->mac_link_dropped) {
link_state.link = false;
} else {
switch (pl->link_an_mode) {
switch (pl->cur_link_an_mode) {
case MLO_AN_PHY:
link_state = pl->phy_state;
phylink_resolve_flow(pl, &link_state);
......@@ -648,7 +649,7 @@ struct phylink *phylink_create(struct phylink_config *config,
return ERR_PTR(ret);
}
if (pl->link_an_mode == MLO_AN_FIXED) {
if (pl->cfg_link_an_mode == MLO_AN_FIXED) {
ret = phylink_parse_fixedlink(pl, fwnode);
if (ret < 0) {
kfree(pl);
......@@ -656,6 +657,8 @@ struct phylink *phylink_create(struct phylink_config *config,
}
}
pl->cur_link_an_mode = pl->cfg_link_an_mode;
ret = phylink_register_sfp(pl, fwnode);
if (ret < 0) {
kfree(pl);
......@@ -769,8 +772,8 @@ static int phylink_bringup_phy(struct phylink *pl, struct phy_device *phy,
static int phylink_attach_phy(struct phylink *pl, struct phy_device *phy,
phy_interface_t interface)
{
if (WARN_ON(pl->link_an_mode == MLO_AN_FIXED ||
(pl->link_an_mode == MLO_AN_INBAND &&
if (WARN_ON(pl->cfg_link_an_mode == MLO_AN_FIXED ||
(pl->cfg_link_an_mode == MLO_AN_INBAND &&
phy_interface_mode_is_8023z(interface))))
return -EINVAL;
......@@ -837,8 +840,8 @@ int phylink_of_phy_connect(struct phylink *pl, struct device_node *dn,
int ret;
/* Fixed links and 802.3z are handled without needing a PHY */
if (pl->link_an_mode == MLO_AN_FIXED ||
(pl->link_an_mode == MLO_AN_INBAND &&
if (pl->cfg_link_an_mode == MLO_AN_FIXED ||
(pl->cfg_link_an_mode == MLO_AN_INBAND &&
phy_interface_mode_is_8023z(pl->link_interface)))
return 0;
......@@ -849,7 +852,7 @@ int phylink_of_phy_connect(struct phylink *pl, struct device_node *dn,
phy_node = of_parse_phandle(dn, "phy-device", 0);
if (!phy_node) {
if (pl->link_an_mode == MLO_AN_PHY)
if (pl->cfg_link_an_mode == MLO_AN_PHY)
return -ENODEV;
return 0;
}
......@@ -912,7 +915,7 @@ int phylink_fixed_state_cb(struct phylink *pl,
/* It does not make sense to let the link be overriden unless we use
* MLO_AN_FIXED
*/
if (pl->link_an_mode != MLO_AN_FIXED)
if (pl->cfg_link_an_mode != MLO_AN_FIXED)
return -EINVAL;
mutex_lock(&pl->state_mutex);
......@@ -962,7 +965,7 @@ void phylink_start(struct phylink *pl)
ASSERT_RTNL();
phylink_info(pl, "configuring for %s/%s link mode\n",
phylink_an_mode_str(pl->link_an_mode),
phylink_an_mode_str(pl->cur_link_an_mode),
phy_modes(pl->link_config.interface));
/* Always set the carrier off */
......@@ -985,7 +988,7 @@ void phylink_start(struct phylink *pl)
clear_bit(PHYLINK_DISABLE_STOPPED, &pl->phylink_disable_state);
phylink_run_resolve(pl);
if (pl->link_an_mode == MLO_AN_FIXED && pl->link_gpio) {
if (pl->cfg_link_an_mode == MLO_AN_FIXED && pl->link_gpio) {
int irq = gpiod_to_irq(pl->link_gpio);
if (irq > 0) {
......@@ -1000,7 +1003,7 @@ void phylink_start(struct phylink *pl)
if (irq <= 0)
mod_timer(&pl->link_poll, jiffies + HZ);
}
if (pl->link_an_mode == MLO_AN_FIXED && pl->get_fixed_state)
if (pl->cfg_link_an_mode == MLO_AN_FIXED && pl->get_fixed_state)
mod_timer(&pl->link_poll, jiffies + HZ);
if (pl->phydev)
phy_start(pl->phydev);
......@@ -1127,7 +1130,7 @@ int phylink_ethtool_ksettings_get(struct phylink *pl,
linkmode_copy(kset->link_modes.supported, pl->supported);
switch (pl->link_an_mode) {
switch (pl->cur_link_an_mode) {
case MLO_AN_FIXED:
/* We are using fixed settings. Report these as the
* current link settings - and note that these also
......@@ -1199,7 +1202,7 @@ int phylink_ethtool_ksettings_set(struct phylink *pl,
/* If we have a fixed link (as specified by firmware), refuse
* to change link parameters.
*/
if (pl->link_an_mode == MLO_AN_FIXED &&
if (pl->cur_link_an_mode == MLO_AN_FIXED &&
(s->speed != pl->link_config.speed ||
s->duplex != pl->link_config.duplex))
return -EINVAL;
......@@ -1211,7 +1214,7 @@ int phylink_ethtool_ksettings_set(struct phylink *pl,
__clear_bit(ETHTOOL_LINK_MODE_Autoneg_BIT, config.advertising);
} else {
/* If we have a fixed link, refuse to enable autonegotiation */
if (pl->link_an_mode == MLO_AN_FIXED)
if (pl->cur_link_an_mode == MLO_AN_FIXED)
return -EINVAL;
config.speed = SPEED_UNKNOWN;
......@@ -1253,7 +1256,7 @@ int phylink_ethtool_ksettings_set(struct phylink *pl,
* configuration. For a fixed link, this isn't able to change any
* parameters, which just leaves inband mode.
*/
if (pl->link_an_mode == MLO_AN_INBAND &&
if (pl->cur_link_an_mode == MLO_AN_INBAND &&
!test_bit(PHYLINK_DISABLE_STOPPED, &pl->phylink_disable_state)) {
phylink_mac_config(pl, &pl->link_config);
phylink_mac_an_restart(pl);
......@@ -1343,7 +1346,7 @@ int phylink_ethtool_set_pauseparam(struct phylink *pl,
pause->tx_pause);
} else if (!test_bit(PHYLINK_DISABLE_STOPPED,
&pl->phylink_disable_state)) {
switch (pl->link_an_mode) {
switch (pl->cur_link_an_mode) {
case MLO_AN_FIXED:
/* Should we allow fixed links to change against the config? */
phylink_resolve_flow(pl, config);
......@@ -1550,7 +1553,7 @@ static int phylink_mii_read(struct phylink *pl, unsigned int phy_id,
struct phylink_link_state state;
int val = 0xffff;
switch (pl->link_an_mode) {
switch (pl->cur_link_an_mode) {
case MLO_AN_FIXED:
if (phy_id == 0) {
phylink_get_fixed_state(pl, &state);
......@@ -1575,7 +1578,7 @@ static int phylink_mii_read(struct phylink *pl, unsigned int phy_id,
static int phylink_mii_write(struct phylink *pl, unsigned int phy_id,
unsigned int reg, unsigned int val)
{
switch (pl->link_an_mode) {
switch (pl->cur_link_an_mode) {
case MLO_AN_FIXED:
break;
......@@ -1748,10 +1751,10 @@ static int phylink_sfp_module_insert(void *upstream,
linkmode_copy(pl->link_config.advertising, config.advertising);
}
if (pl->link_an_mode != MLO_AN_INBAND ||
if (pl->cur_link_an_mode != MLO_AN_INBAND ||
pl->link_config.interface != config.interface) {
pl->link_config.interface = config.interface;
pl->link_an_mode = MLO_AN_INBAND;
pl->cur_link_an_mode = MLO_AN_INBAND;
changed = true;
......
Markdown is supported
0%
or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment