Commit 25aeb418 authored by Lad, Prabhakar's avatar Lad, Prabhakar Committed by Mauro Carvalho Chehab
parent e72ed08e
......@@ -391,7 +391,7 @@ static void isp_disable_interrupts(struct isp_device *isp)
* @isp: OMAP3 ISP device
* @idle: Consider idle state.
*
* Set the power settings for the ISP and SBL bus and cConfigure the HS/VS
* Set the power settings for the ISP and SBL bus and configure the HS/VS
* interrupt source.
*
* We need to configure the HS/VS interrupt source before interrupts get
......
......@@ -293,7 +293,7 @@ static int __ccdc_lsc_enable(struct isp_ccdc_device *ccdc, int enable)
isp_reg_clr(isp, OMAP3_ISP_IOMEM_CCDC,
ISPCCDC_LSC_CONFIG, ISPCCDC_LSC_ENABLE);
ccdc->lsc.state = LSC_STATE_STOPPED;
dev_warn(to_device(ccdc), "LSC prefecth timeout\n");
dev_warn(to_device(ccdc), "LSC prefetch timeout\n");
return -ETIMEDOUT;
}
ccdc->lsc.state = LSC_STATE_RUNNING;
......
......@@ -518,7 +518,7 @@ static void ccp2_mem_configure(struct isp_ccp2_device *ccp2,
ISPCCP2_LCM_IRQSTATUS_EOF_IRQ,
OMAP3_ISP_IOMEM_CCP2, ISPCCP2_LCM_IRQSTATUS);
/* Enable LCM interupts */
/* Enable LCM interrupts */
isp_reg_set(isp, OMAP3_ISP_IOMEM_CCP2, ISPCCP2_LCM_IRQENABLE,
ISPCCP2_LCM_IRQSTATUS_EOF_IRQ |
ISPCCP2_LCM_IRQSTATUS_OCPERROR_IRQ);
......@@ -1096,7 +1096,7 @@ static int ccp2_init_entities(struct isp_ccp2_device *ccp2)
* implementation we use a fixed 32 bytes alignment regardless of the
* input format and width. If strict 128 bits alignment support is
* required ispvideo will need to be made aware of this special dual
* alignement requirements.
* alignment requirements.
*/
ccp2->video_in.type = V4L2_BUF_TYPE_VIDEO_OUTPUT;
ccp2->video_in.bpl_alignment = 32;
......
......@@ -351,7 +351,7 @@ static int hist_validate_params(struct ispstat *hist, void *new_conf)
buf_size = hist_get_buf_size(user_cfg);
if (buf_size > user_cfg->buf_size)
/* User's buf_size request wasn't enoght */
/* User's buf_size request wasn't enough */
user_cfg->buf_size = buf_size;
else if (user_cfg->buf_size > OMAP3ISP_HIST_MAX_BUF_SIZE)
user_cfg->buf_size = OMAP3ISP_HIST_MAX_BUF_SIZE;
......
......@@ -122,7 +122,7 @@ static struct omap3isp_prev_csc flr_prev_csc = {
#define PREV_MAX_OUT_WIDTH_REV_15 4096
/*
* Coeficient Tables for the submodules in Preview.
* Coefficient Tables for the submodules in Preview.
* Array is initialised with the values from.the tables text file.
*/
......@@ -1372,7 +1372,7 @@ static void preview_init_params(struct isp_prev_device *prev)
}
/*
* preview_max_out_width - Handle previewer hardware ouput limitations
* preview_max_out_width - Handle previewer hardware output limitations
* @isp_revision : ISP revision
* returns maximum width output for current isp revision
*/
......
......@@ -597,7 +597,7 @@ static int isp_video_buffer_wait(struct isp_video_buffer *buf, int nonblocking)
* isp_video_queue_free - Free video buffers memory
*
* Buffers can only be freed if the queue isn't streaming and if no buffer is
* mapped to userspace. Return -EBUSY if those conditions aren't statisfied.
* mapped to userspace. Return -EBUSY if those conditions aren't satisfied.
*
* This function must be called with the queue lock held.
*/
......
......@@ -30,12 +30,12 @@
#include <linux/types.h>
/*
* Constants for filter coefficents count
* Constants for filter coefficients count
*/
#define COEFF_CNT 32
/*
* struct isprsz_coef - Structure for resizer filter coeffcients.
* struct isprsz_coef - Structure for resizer filter coefficients.
* @h_filter_coef_4tap: Horizontal filter coefficients for 8-phase/4-tap
* mode (.5x-4x)
* @v_filter_coef_4tap: Vertical filter coefficients for 8-phase/4-tap
......
......@@ -144,7 +144,7 @@ static int isp_stat_buf_check_magic(struct ispstat *stat,
for (w = buf->virt_addr + buf_size, end = w + MAGIC_SIZE;
w < end; w++) {
if (unlikely(*w != MAGIC_NUM)) {
dev_dbg(stat->isp->dev, "%s: endding magic check does "
dev_dbg(stat->isp->dev, "%s: ending magic check does "
"not match.\n", stat->subdev.name);
return -EINVAL;
}
......@@ -841,7 +841,7 @@ int omap3isp_stat_s_stream(struct v4l2_subdev *subdev, int enable)
if (enable) {
/*
* Only set enable PCR bit if the module was previously
* enabled through ioct.
* enabled through ioctl.
*/
isp_stat_try_enable(stat);
} else {
......
Markdown is supported
0%
or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment