drm/i915/opregion: add acpi defines from the spec

It's easier to read the code when the macro names match the spec. Also
add a bunch of missing ones. No functional changes.
Reviewed-and-tested-by: Peter Wu <peter@lekensteyn.nl>
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Link: http://patchwork.freedesktop.org/patch/msgid/7cfdd2733b8cc7abae43cfa8c81aed902b69ecd5.1465810007.git.jani.nikula@intel.com

drivers/gpu/drm/i915/intel_opregion.c

@@ -232,11 +232,28 @@ struct opregion_asle_ext {
 #define SWSCI_SBCB_POST_VBE_PM		SWSCI_FUNCTION_CODE(SWSCI_SBCB, 19)
 #define SWSCI_SBCB_ENABLE_DISABLE_AUDIO	SWSCI_FUNCTION_CODE(SWSCI_SBCB, 21)
 
-#define ACPI_OTHER_OUTPUT (0<<8)
-#define ACPI_VGA_OUTPUT (1<<8)
-#define ACPI_TV_OUTPUT (2<<8)
-#define ACPI_DIGITAL_OUTPUT (3<<8)
-#define ACPI_LVDS_OUTPUT (4<<8)
+/*
+ * ACPI Specification, Revision 5.0, Appendix B.3.2 _DOD (Enumerate All Devices
+ * Attached to the Display Adapter).
+ */
+#define ACPI_DISPLAY_INDEX_SHIFT		0
+#define ACPI_DISPLAY_INDEX_MASK			(0xf << 0)
+#define ACPI_DISPLAY_PORT_ATTACHMENT_SHIFT	4
+#define ACPI_DISPLAY_PORT_ATTACHMENT_MASK	(0xf << 4)
+#define ACPI_DISPLAY_TYPE_SHIFT			8
+#define ACPI_DISPLAY_TYPE_MASK			(0xf << 8)
+#define ACPI_DISPLAY_TYPE_OTHER			(0 << 8)
+#define ACPI_DISPLAY_TYPE_VGA			(1 << 8)
+#define ACPI_DISPLAY_TYPE_TV			(2 << 8)
+#define ACPI_DISPLAY_TYPE_EXTERNAL_DIGITAL	(3 << 8)
+#define ACPI_DISPLAY_TYPE_INTERNAL_DIGITAL	(4 << 8)
+#define ACPI_VENDOR_SPECIFIC_SHIFT		12
+#define ACPI_VENDOR_SPECIFIC_MASK		(0xf << 12)
+#define ACPI_BIOS_CAN_DETECT			(1 << 16)
+#define ACPI_DEPENDS_ON_VGA			(1 << 17)
+#define ACPI_PIPE_ID_SHIFT			18
+#define ACPI_PIPE_ID_MASK			(7 << 18)
+#define ACPI_DEVICE_ID_SCHEME			(1 << 31)
 
 #define MAX_DSLP	1500
 
@@ -725,7 +742,7 @@ static void intel_didl_outputs(struct drm_i915_private *dev_priv)
 blind_set:
 	i = 0;
 	list_for_each_entry(connector, &dev_priv->dev->mode_config.connector_list, head) {
-		int output_type = ACPI_OTHER_OUTPUT;
+		int output_type = ACPI_DISPLAY_TYPE_OTHER;
 		if (i >= max_outputs) {
 			DRM_DEBUG_KMS("More than %u outputs in connector list\n",
 				      max_outputs);
@@ -734,23 +751,23 @@ static void intel_didl_outputs(struct drm_i915_private *dev_priv)
 		switch (connector->connector_type) {
 		case DRM_MODE_CONNECTOR_VGA:
 		case DRM_MODE_CONNECTOR_DVIA:
-			output_type = ACPI_VGA_OUTPUT;
+			output_type = ACPI_DISPLAY_TYPE_VGA;
 			break;
 		case DRM_MODE_CONNECTOR_Composite:
 		case DRM_MODE_CONNECTOR_SVIDEO:
 		case DRM_MODE_CONNECTOR_Component:
 		case DRM_MODE_CONNECTOR_9PinDIN:
-			output_type = ACPI_TV_OUTPUT;
+			output_type = ACPI_DISPLAY_TYPE_TV;
 			break;
 		case DRM_MODE_CONNECTOR_DVII:
 		case DRM_MODE_CONNECTOR_DVID:
 		case DRM_MODE_CONNECTOR_DisplayPort:
 		case DRM_MODE_CONNECTOR_HDMIA:
 		case DRM_MODE_CONNECTOR_HDMIB:
-			output_type = ACPI_DIGITAL_OUTPUT;
+			output_type = ACPI_DISPLAY_TYPE_EXTERNAL_DIGITAL;
 			break;
 		case DRM_MODE_CONNECTOR_LVDS:
-			output_type = ACPI_LVDS_OUTPUT;
+			output_type = ACPI_DISPLAY_TYPE_INTERNAL_DIGITAL;
 			break;
 		}
 		temp = get_did(opregion, i);