pinctrl: mediatek: add ies/smt control to common code.

Input enable and smt setting have different register,
modify code to fix it.

Several mediatek soc use similar input enable/smt setting
procedure as mt8173, some soc use generic input enable/smt
setting, some soc has no input enable/smt setting. Adding
common code to handle all those cases, so future soc driver
can use it.
Signed-off-by: Hongzhou Yang <hongzhou.yang@mediatek.com>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>

drivers/pinctrl/mediatek/pinctrl-mt8173.c

@@ -18,6 +18,7 @@
 #include <linux/of_device.h>
 #include <linux/pinctrl/pinctrl.h>
 #include <linux/regmap.h>
+#include <linux/pinctrl/pinconf-generic.h>
 #include <dt-bindings/pinctrl/mt65xx.h>
 
 #include "pinctrl-mtk-common.h"
@@ -25,28 +26,6 @@
 
 #define DRV_BASE				0xb00
 
-/**
- * struct mtk_pin_ies_smt_set - For special pins' ies and smt setting.
- * @start: The start pin number of those special pins.
- * @end: The end pin number of those special pins.
- * @offset: The offset of special setting register.
- * @bit: The bit of special setting register.
- */
-struct mtk_pin_ies_smt_set {
-	unsigned int start;
-	unsigned int end;
-	unsigned int offset;
-	unsigned char bit;
-};
-
-#define MTK_PIN_IES_SMT_SET(_start, _end, _offset, _bit)	\
-	{	\
-		.start = _start,	\
-		.end = _end,	\
-		.bit = _bit,	\
-		.offset = _offset,	\
-	}
-
 static const struct mtk_pin_spec_pupd_set_samereg mt8173_spec_pupd[] = {
 	MTK_PIN_PUPD_SPEC_SR(119, 0xe00, 2, 1, 0),  /* KROW0 */
 	MTK_PIN_PUPD_SPEC_SR(120, 0xe00, 6, 5, 4),  /* KROW1 */
@@ -97,80 +76,114 @@ static int mt8173_spec_pull_set(struct regmap *regmap, unsigned int pin,
 		ARRAY_SIZE(mt8173_spec_pupd), pin, align, isup, r1r0);
 }
 
-static const struct mtk_pin_ies_smt_set mt8173_ies_smt_set[] = {
-	MTK_PIN_IES_SMT_SET(0, 4, 0x930, 1),
-	MTK_PIN_IES_SMT_SET(5, 9, 0x930, 2),
-	MTK_PIN_IES_SMT_SET(10, 13, 0x930, 10),
-	MTK_PIN_IES_SMT_SET(14, 15, 0x940, 10),
-	MTK_PIN_IES_SMT_SET(16, 16, 0x930, 0),
-	MTK_PIN_IES_SMT_SET(17, 17, 0x950, 2),
-	MTK_PIN_IES_SMT_SET(18, 21, 0x940, 3),
-	MTK_PIN_IES_SMT_SET(29, 32, 0x930, 3),
-	MTK_PIN_IES_SMT_SET(33, 33, 0x930, 4),
-	MTK_PIN_IES_SMT_SET(34, 36, 0x930, 5),
-	MTK_PIN_IES_SMT_SET(37, 38, 0x930, 6),
-	MTK_PIN_IES_SMT_SET(39, 39, 0x930, 7),
-	MTK_PIN_IES_SMT_SET(40, 41, 0x930, 9),
-	MTK_PIN_IES_SMT_SET(42, 42, 0x940, 0),
-	MTK_PIN_IES_SMT_SET(43, 44, 0x930, 11),
-	MTK_PIN_IES_SMT_SET(45, 46, 0x930, 12),
-	MTK_PIN_IES_SMT_SET(57, 64, 0xc20, 13),
-	MTK_PIN_IES_SMT_SET(65, 65, 0xc10, 13),
-	MTK_PIN_IES_SMT_SET(66, 66, 0xc00, 13),
-	MTK_PIN_IES_SMT_SET(67, 67, 0xd10, 13),
-	MTK_PIN_IES_SMT_SET(68, 68, 0xd00, 13),
-	MTK_PIN_IES_SMT_SET(69, 72, 0x940, 14),
-	MTK_PIN_IES_SMT_SET(73, 76, 0xc60, 13),
-	MTK_PIN_IES_SMT_SET(77, 77, 0xc40, 13),
-	MTK_PIN_IES_SMT_SET(78, 78, 0xc50, 13),
-	MTK_PIN_IES_SMT_SET(79, 82, 0x940, 15),
-	MTK_PIN_IES_SMT_SET(83, 83, 0x950, 0),
-	MTK_PIN_IES_SMT_SET(84, 85, 0x950, 1),
-	MTK_PIN_IES_SMT_SET(86, 91, 0x950, 2),
-	MTK_PIN_IES_SMT_SET(92, 92, 0x930, 13),
-	MTK_PIN_IES_SMT_SET(93, 95, 0x930, 14),
-	MTK_PIN_IES_SMT_SET(96, 99, 0x930, 15),
-	MTK_PIN_IES_SMT_SET(100, 103, 0xca0, 13),
-	MTK_PIN_IES_SMT_SET(104, 104, 0xc80, 13),
-	MTK_PIN_IES_SMT_SET(105, 105, 0xc90, 13),
-	MTK_PIN_IES_SMT_SET(106, 107, 0x940, 4),
-	MTK_PIN_IES_SMT_SET(108, 112, 0x940, 1),
-	MTK_PIN_IES_SMT_SET(113, 116, 0x940, 2),
-	MTK_PIN_IES_SMT_SET(117, 118, 0x940, 5),
-	MTK_PIN_IES_SMT_SET(119, 124, 0x940, 6),
-	MTK_PIN_IES_SMT_SET(125, 126, 0x940, 7),
-	MTK_PIN_IES_SMT_SET(127, 127, 0x940, 0),
-	MTK_PIN_IES_SMT_SET(128, 128, 0x950, 8),
-	MTK_PIN_IES_SMT_SET(129, 130, 0x950, 9),
-	MTK_PIN_IES_SMT_SET(131, 132, 0x950, 8),
-	MTK_PIN_IES_SMT_SET(133, 134, 0x910, 8)
+static const struct mtk_pin_ies_smt_set mt8173_smt_set[] = {
+	MTK_PIN_IES_SMT_SPEC(0, 4, 0x930, 1),
+	MTK_PIN_IES_SMT_SPEC(5, 9, 0x930, 2),
+	MTK_PIN_IES_SMT_SPEC(10, 13, 0x930, 10),
+	MTK_PIN_IES_SMT_SPEC(14, 15, 0x940, 10),
+	MTK_PIN_IES_SMT_SPEC(16, 16, 0x930, 0),
+	MTK_PIN_IES_SMT_SPEC(17, 17, 0x950, 2),
+	MTK_PIN_IES_SMT_SPEC(18, 21, 0x940, 3),
+	MTK_PIN_IES_SMT_SPEC(29, 32, 0x930, 3),
+	MTK_PIN_IES_SMT_SPEC(33, 33, 0x930, 4),
+	MTK_PIN_IES_SMT_SPEC(34, 36, 0x930, 5),
+	MTK_PIN_IES_SMT_SPEC(37, 38, 0x930, 6),
+	MTK_PIN_IES_SMT_SPEC(39, 39, 0x930, 7),
+	MTK_PIN_IES_SMT_SPEC(40, 41, 0x930, 9),
+	MTK_PIN_IES_SMT_SPEC(42, 42, 0x940, 0),
+	MTK_PIN_IES_SMT_SPEC(43, 44, 0x930, 11),
+	MTK_PIN_IES_SMT_SPEC(45, 46, 0x930, 12),
+	MTK_PIN_IES_SMT_SPEC(57, 64, 0xc20, 13),
+	MTK_PIN_IES_SMT_SPEC(65, 65, 0xc10, 13),
+	MTK_PIN_IES_SMT_SPEC(66, 66, 0xc00, 13),
+	MTK_PIN_IES_SMT_SPEC(67, 67, 0xd10, 13),
+	MTK_PIN_IES_SMT_SPEC(68, 68, 0xd00, 13),
+	MTK_PIN_IES_SMT_SPEC(69, 72, 0x940, 14),
+	MTK_PIN_IES_SMT_SPEC(73, 76, 0xc60, 13),
+	MTK_PIN_IES_SMT_SPEC(77, 77, 0xc40, 13),
+	MTK_PIN_IES_SMT_SPEC(78, 78, 0xc50, 13),
+	MTK_PIN_IES_SMT_SPEC(79, 82, 0x940, 15),
+	MTK_PIN_IES_SMT_SPEC(83, 83, 0x950, 0),
+	MTK_PIN_IES_SMT_SPEC(84, 85, 0x950, 1),
+	MTK_PIN_IES_SMT_SPEC(86, 91, 0x950, 2),
+	MTK_PIN_IES_SMT_SPEC(92, 92, 0x930, 13),
+	MTK_PIN_IES_SMT_SPEC(93, 95, 0x930, 14),
+	MTK_PIN_IES_SMT_SPEC(96, 99, 0x930, 15),
+	MTK_PIN_IES_SMT_SPEC(100, 103, 0xca0, 13),
+	MTK_PIN_IES_SMT_SPEC(104, 104, 0xc80, 13),
+	MTK_PIN_IES_SMT_SPEC(105, 105, 0xc90, 13),
+	MTK_PIN_IES_SMT_SPEC(106, 107, 0x940, 4),
+	MTK_PIN_IES_SMT_SPEC(108, 112, 0x940, 1),
+	MTK_PIN_IES_SMT_SPEC(113, 116, 0x940, 2),
+	MTK_PIN_IES_SMT_SPEC(117, 118, 0x940, 5),
+	MTK_PIN_IES_SMT_SPEC(119, 124, 0x940, 6),
+	MTK_PIN_IES_SMT_SPEC(125, 126, 0x940, 7),
+	MTK_PIN_IES_SMT_SPEC(127, 127, 0x940, 0),
+	MTK_PIN_IES_SMT_SPEC(128, 128, 0x950, 8),
+	MTK_PIN_IES_SMT_SPEC(129, 130, 0x950, 9),
+	MTK_PIN_IES_SMT_SPEC(131, 132, 0x950, 8),
+	MTK_PIN_IES_SMT_SPEC(133, 134, 0x910, 8)
 };
 
-static int spec_ies_smt_set(struct regmap *regmap, unsigned int pin,
-		unsigned char align, int value)
-{
-	unsigned int i, reg_addr, bit;
-	bool find = false;
-
-	for (i = 0; i < ARRAY_SIZE(mt8173_ies_smt_set); i++) {
-		if (pin >= mt8173_ies_smt_set[i].start &&
-				pin <= mt8173_ies_smt_set[i].end) {
-			find = true;
-			break;
-		}
-	}
-
-	if (!find)
-		return -EINVAL;
-
-	if (value)
-		reg_addr = mt8173_ies_smt_set[i].offset + align;
-	else
-		reg_addr = mt8173_ies_smt_set[i].offset + (align << 1);
+static const struct mtk_pin_ies_smt_set mt8173_ies_set[] = {
+	MTK_PIN_IES_SMT_SPEC(0, 4, 0x900, 1),
+	MTK_PIN_IES_SMT_SPEC(5, 9, 0x900, 2),
+	MTK_PIN_IES_SMT_SPEC(10, 13, 0x900, 10),
+	MTK_PIN_IES_SMT_SPEC(14, 15, 0x910, 10),
+	MTK_PIN_IES_SMT_SPEC(16, 16, 0x900, 0),
+	MTK_PIN_IES_SMT_SPEC(17, 17, 0x920, 2),
+	MTK_PIN_IES_SMT_SPEC(18, 21, 0x910, 3),
+	MTK_PIN_IES_SMT_SPEC(29, 32, 0x900, 3),
+	MTK_PIN_IES_SMT_SPEC(33, 33, 0x900, 4),
+	MTK_PIN_IES_SMT_SPEC(34, 36, 0x900, 5),
+	MTK_PIN_IES_SMT_SPEC(37, 38, 0x900, 6),
+	MTK_PIN_IES_SMT_SPEC(39, 39, 0x900, 7),
+	MTK_PIN_IES_SMT_SPEC(40, 41, 0x900, 9),
+	MTK_PIN_IES_SMT_SPEC(42, 42, 0x910, 0),
+	MTK_PIN_IES_SMT_SPEC(43, 44, 0x900, 11),
+	MTK_PIN_IES_SMT_SPEC(45, 46, 0x900, 12),
+	MTK_PIN_IES_SMT_SPEC(57, 64, 0xc20, 14),
+	MTK_PIN_IES_SMT_SPEC(65, 65, 0xc10, 14),
+	MTK_PIN_IES_SMT_SPEC(66, 66, 0xc00, 14),
+	MTK_PIN_IES_SMT_SPEC(67, 67, 0xd10, 14),
+	MTK_PIN_IES_SMT_SPEC(68, 68, 0xd00, 14),
+	MTK_PIN_IES_SMT_SPEC(69, 72, 0x910, 14),
+	MTK_PIN_IES_SMT_SPEC(73, 76, 0xc60, 14),
+	MTK_PIN_IES_SMT_SPEC(77, 77, 0xc40, 14),
+	MTK_PIN_IES_SMT_SPEC(78, 78, 0xc50, 14),
+	MTK_PIN_IES_SMT_SPEC(79, 82, 0x910, 15),
+	MTK_PIN_IES_SMT_SPEC(83, 83, 0x920, 0),
+	MTK_PIN_IES_SMT_SPEC(84, 85, 0x920, 1),
+	MTK_PIN_IES_SMT_SPEC(86, 91, 0x920, 2),
+	MTK_PIN_IES_SMT_SPEC(92, 92, 0x900, 13),
+	MTK_PIN_IES_SMT_SPEC(93, 95, 0x900, 14),
+	MTK_PIN_IES_SMT_SPEC(96, 99, 0x900, 15),
+	MTK_PIN_IES_SMT_SPEC(100, 103, 0xca0, 14),
+	MTK_PIN_IES_SMT_SPEC(104, 104, 0xc80, 14),
+	MTK_PIN_IES_SMT_SPEC(105, 105, 0xc90, 14),
+	MTK_PIN_IES_SMT_SPEC(106, 107, 0x91, 4),
+	MTK_PIN_IES_SMT_SPEC(108, 112, 0x910, 1),
+	MTK_PIN_IES_SMT_SPEC(113, 116, 0x910, 2),
+	MTK_PIN_IES_SMT_SPEC(117, 118, 0x910, 5),
+	MTK_PIN_IES_SMT_SPEC(119, 124, 0x910, 6),
+	MTK_PIN_IES_SMT_SPEC(125, 126, 0x910, 7),
+	MTK_PIN_IES_SMT_SPEC(127, 127, 0x910, 0),
+	MTK_PIN_IES_SMT_SPEC(128, 128, 0x920, 8),
+	MTK_PIN_IES_SMT_SPEC(129, 130, 0x920, 9),
+	MTK_PIN_IES_SMT_SPEC(131, 132, 0x920, 8),
+	MTK_PIN_IES_SMT_SPEC(133, 134, 0x910, 8)
+};
 
-	bit = BIT(mt8173_ies_smt_set[i].bit);
-	regmap_write(regmap, reg_addr, bit);
-	return 0;
+static int mt8173_ies_smt_set(struct regmap *regmap, unsigned int pin,
+		unsigned char align, int value, enum pin_config_param arg)
+{
+	if (arg == PIN_CONFIG_INPUT_ENABLE)
+		return mtk_pconf_spec_set_ies_smt_range(regmap, mt8173_ies_set,
+			ARRAY_SIZE(mt8173_ies_set), pin, align, value);
+	else if (arg == PIN_CONFIG_INPUT_SCHMITT_ENABLE)
+		return mtk_pconf_spec_set_ies_smt_range(regmap, mt8173_smt_set,
+			ARRAY_SIZE(mt8173_smt_set), pin, align, value);
+	return -EINVAL;
 }
 
 static const struct mtk_drv_group_desc mt8173_drv_grp[] =  {
@@ -307,7 +320,7 @@ static const struct mtk_pinctrl_devdata mt8173_pinctrl_data = {
 	.pin_drv_grp = mt8173_pin_drv,
 	.n_pin_drv_grps = ARRAY_SIZE(mt8173_pin_drv),
 	.spec_pull_set = mt8173_spec_pull_set,
-	.spec_ies_smt_set = spec_ies_smt_set,
+	.spec_ies_smt_set = mt8173_ies_smt_set,
 	.dir_offset = 0x0000,
 	.pullen_offset = 0x0100,
 	.pullsel_offset = 0x0200,

drivers/pinctrl/mediatek/pinctrl-mtk-common.c

@@ -107,28 +107,38 @@ static void mtk_gpio_set(struct gpio_chip *chip, unsigned offset, int value)
 	regmap_write(mtk_get_regmap(pctl, offset), reg_addr, bit);
 }
 
-static void mtk_pconf_set_ies_smt(struct mtk_pinctrl *pctl, unsigned pin,
-		int value, enum pin_config_param param)
+static int mtk_pconf_set_ies_smt(struct mtk_pinctrl *pctl, unsigned pin,
+		int value, enum pin_config_param arg)
 {
 	unsigned int reg_addr, offset;
 	unsigned int bit;
-	int ret;
+
+	/**
+	 * Due to some soc are not support ies/smt config, add this special
+	 * control to handle it.
+	 */
+	if (!pctl->devdata->spec_ies_smt_set &&
+		pctl->devdata->ies_offset == MTK_PINCTRL_NOT_SUPPORT &&
+			arg == PIN_CONFIG_INPUT_ENABLE)
+		return -EINVAL;
+
+	if (!pctl->devdata->spec_ies_smt_set &&
+		pctl->devdata->smt_offset == MTK_PINCTRL_NOT_SUPPORT &&
+			arg == PIN_CONFIG_INPUT_SCHMITT_ENABLE)
+		return -EINVAL;
 
 	/*
 	 * Due to some pins are irregular, their input enable and smt
-	 * control register are discontinuous, but they are mapping together.
-	 * So we need this special handle.
+	 * control register are discontinuous, so we need this special handle.
 	 */
 	if (pctl->devdata->spec_ies_smt_set) {
-		ret = pctl->devdata->spec_ies_smt_set(mtk_get_regmap(pctl, pin),
-			pin, pctl->devdata->port_align, value);
-		if (!ret)
-			return;
+		return pctl->devdata->spec_ies_smt_set(mtk_get_regmap(pctl, pin),
+			pin, pctl->devdata->port_align, value, arg);
 	}
 
 	bit = BIT(pin & 0xf);
 
-	if (param == PIN_CONFIG_INPUT_ENABLE)
+	if (arg == PIN_CONFIG_INPUT_ENABLE)
 		offset = pctl->devdata->ies_offset;
 	else
 		offset = pctl->devdata->smt_offset;
@@ -139,6 +149,33 @@ static void mtk_pconf_set_ies_smt(struct mtk_pinctrl *pctl, unsigned pin,
 		reg_addr = CLR_ADDR(mtk_get_port(pctl, pin) + offset, pctl);
 
 	regmap_write(mtk_get_regmap(pctl, pin), reg_addr, bit);
+	return 0;
+}
+
+int mtk_pconf_spec_set_ies_smt_range(struct regmap *regmap,
+		const struct mtk_pin_ies_smt_set *ies_smt_infos, unsigned int info_num,
+		unsigned int pin, unsigned char align, int value)
+{
+	unsigned int i, reg_addr, bit;
+
+	for (i = 0; i < info_num; i++) {
+		if (pin >= ies_smt_infos[i].start &&
+				pin <= ies_smt_infos[i].end) {
+			break;
+		}
+	}
+
+	if (i == info_num)
+		return -EINVAL;
+
+	if (value)
+		reg_addr = ies_smt_infos[i].offset + align;
+	else
+		reg_addr = ies_smt_infos[i].offset + (align << 1);
+
+	bit = BIT(ies_smt_infos[i].bit);
+	regmap_write(regmap, reg_addr, bit);
+	return 0;
 }
 
 static const struct mtk_pin_drv_grp *mtk_find_pin_drv_grp_by_pin(
@@ -295,36 +332,37 @@ static int mtk_pconf_parse_conf(struct pinctrl_dev *pctldev,
 		unsigned int pin, enum pin_config_param param,
 		enum pin_config_param arg)
 {
+	int ret = 0;
 	struct mtk_pinctrl *pctl = pinctrl_dev_get_drvdata(pctldev);
 
 	switch (param) {
 	case PIN_CONFIG_BIAS_DISABLE:
-		mtk_pconf_set_pull_select(pctl, pin, false, false, arg);
+		ret = mtk_pconf_set_pull_select(pctl, pin, false, false, arg);
 		break;
 	case PIN_CONFIG_BIAS_PULL_UP:
-		mtk_pconf_set_pull_select(pctl, pin, true, true, arg);
+		ret = mtk_pconf_set_pull_select(pctl, pin, true, true, arg);
 		break;
 	case PIN_CONFIG_BIAS_PULL_DOWN:
-		mtk_pconf_set_pull_select(pctl, pin, true, false, arg);
+		ret = mtk_pconf_set_pull_select(pctl, pin, true, false, arg);
 		break;
 	case PIN_CONFIG_INPUT_ENABLE:
-		mtk_pconf_set_ies_smt(pctl, pin, arg, param);
+		ret = mtk_pconf_set_ies_smt(pctl, pin, arg, param);
 		break;
 	case PIN_CONFIG_OUTPUT:
 		mtk_gpio_set(pctl->chip, pin, arg);
-		mtk_pmx_gpio_set_direction(pctldev, NULL, pin, false);
+		ret = mtk_pmx_gpio_set_direction(pctldev, NULL, pin, false);
 		break;
 	case PIN_CONFIG_INPUT_SCHMITT_ENABLE:
-		mtk_pconf_set_ies_smt(pctl, pin, arg, param);
+		ret = mtk_pconf_set_ies_smt(pctl, pin, arg, param);
 		break;
 	case PIN_CONFIG_DRIVE_STRENGTH:
-		mtk_pconf_set_driving(pctl, pin, arg);
+		ret = mtk_pconf_set_driving(pctl, pin, arg);
 		break;
 	default:
-		return -EINVAL;
+		ret = -EINVAL;
 	}
 
-	return 0;
+	return ret;
 }
 
 static int mtk_pconf_group_get(struct pinctrl_dev *pctldev,
@@ -343,12 +381,14 @@ static int mtk_pconf_group_set(struct pinctrl_dev *pctldev, unsigned group,
 {
 	struct mtk_pinctrl *pctl = pinctrl_dev_get_drvdata(pctldev);
 	struct mtk_pinctrl_group *g = &pctl->groups[group];
-	int i;
+	int i, ret;
 
 	for (i = 0; i < num_configs; i++) {
-		mtk_pconf_parse_conf(pctldev, g->pin,
+		ret = mtk_pconf_parse_conf(pctldev, g->pin,
 			pinconf_to_config_param(configs[i]),
 			pinconf_to_config_argument(configs[i]));
+		if (ret < 0)
+			return ret;
 
 		g->config = configs[i];
 	}

drivers/pinctrl/mediatek/pinctrl-mtk-common.h

@@ -17,6 +17,7 @@
 
 #include <linux/pinctrl/pinctrl.h>
 #include <linux/regmap.h>
+#include <linux/pinctrl/pinconf-generic.h>
 
 #define NO_EINT_SUPPORT    255
 #define MT_EDGE_SENSITIVE           0
@@ -25,6 +26,8 @@
 #define EINT_DBNC_RST_BIT           (0x1 << 1)
 #define EINT_DBNC_SET_EN            (0x1 << 0)
 
+#define MTK_PINCTRL_NOT_SUPPORT	(0xffff)
+
 struct mtk_desc_function {
 	const char *name;
 	unsigned char muxval;
@@ -143,6 +146,28 @@ struct mtk_pin_spec_pupd_set_samereg {
 		.r0_bit = _r0,		\
 	}
 
+/**
+ * struct mtk_pin_ies_set - For special pins' ies and smt setting.
+ * @start: The start pin number of those special pins.
+ * @end: The end pin number of those special pins.
+ * @offset: The offset of special setting register.
+ * @bit: The bit of special setting register.
+ */
+struct mtk_pin_ies_smt_set {
+	unsigned short start;
+	unsigned short end;
+	unsigned short offset;
+	unsigned char bit;
+};
+
+#define MTK_PIN_IES_SMT_SPEC(_start, _end, _offset, _bit)	\
+	{	\
+		.start = _start,	\
+		.end = _end,	\
+		.bit = _bit,	\
+		.offset = _offset,	\
+	}
+
 struct mtk_eint_offsets {
 	const char *name;
 	unsigned int  stat;
@@ -208,7 +233,7 @@ struct mtk_pinctrl_devdata {
 	int (*spec_pull_set)(struct regmap *reg, unsigned int pin,
 			unsigned char align, bool isup, unsigned int arg);
 	int (*spec_ies_smt_set)(struct regmap *reg, unsigned int pin,
-			unsigned char align, int value);
+			unsigned char align, int value, enum pin_config_param arg);
 	unsigned int dir_offset;
 	unsigned int ies_offset;
 	unsigned int smt_offset;
@@ -251,4 +276,8 @@ int mtk_pctrl_spec_pull_set_samereg(struct regmap *regmap,
 		unsigned int info_num, unsigned int pin,
 		unsigned char align, bool isup, unsigned int r1r0);
 
+int mtk_pconf_spec_set_ies_smt_range(struct regmap *regmap,
+		const struct mtk_pin_ies_smt_set *ies_smt_infos, unsigned int info_num,
+		unsigned int pin, unsigned char align, int value);
+
 #endif /* __PINCTRL_MTK_COMMON_H */