Commit 2628e8af authored by Chris Metcalf's avatar Chris Metcalf Committed by David S. Miller

tile: support jumbo frames in the tilegx network driver

Signed-off-by: default avatarChris Metcalf <cmetcalf@tilera.com>
Signed-off-by: default avatarDavid S. Miller <davem@davemloft.net>
parent 48f2a4e1
......@@ -387,6 +387,27 @@ int gxio_mpipe_link_close_aux(gxio_mpipe_context_t * context, int mac)
EXPORT_SYMBOL(gxio_mpipe_link_close_aux);
struct link_set_attr_aux_param {
int mac;
uint32_t attr;
int64_t val;
};
int gxio_mpipe_link_set_attr_aux(gxio_mpipe_context_t * context, int mac,
uint32_t attr, int64_t val)
{
struct link_set_attr_aux_param temp;
struct link_set_attr_aux_param *params = &temp;
params->mac = mac;
params->attr = attr;
params->val = val;
return hv_dev_pwrite(context->fd, 0, (HV_VirtAddr) params,
sizeof(*params), GXIO_MPIPE_OP_LINK_SET_ATTR_AUX);
}
EXPORT_SYMBOL(gxio_mpipe_link_set_attr_aux);
struct get_timestamp_aux_param {
uint64_t sec;
......@@ -454,6 +475,32 @@ int gxio_mpipe_adjust_timestamp_aux(gxio_mpipe_context_t * context,
EXPORT_SYMBOL(gxio_mpipe_adjust_timestamp_aux);
struct config_edma_ring_blks_param {
unsigned int ering;
unsigned int max_blks;
unsigned int min_snf_blks;
unsigned int db;
};
int gxio_mpipe_config_edma_ring_blks(gxio_mpipe_context_t * context,
unsigned int ering, unsigned int max_blks,
unsigned int min_snf_blks, unsigned int db)
{
struct config_edma_ring_blks_param temp;
struct config_edma_ring_blks_param *params = &temp;
params->ering = ering;
params->max_blks = max_blks;
params->min_snf_blks = min_snf_blks;
params->db = db;
return hv_dev_pwrite(context->fd, 0, (HV_VirtAddr) params,
sizeof(*params),
GXIO_MPIPE_OP_CONFIG_EDMA_RING_BLKS);
}
EXPORT_SYMBOL(gxio_mpipe_config_edma_ring_blks);
struct arm_pollfd_param {
union iorpc_pollfd pollfd;
};
......
......@@ -383,7 +383,7 @@ EXPORT_SYMBOL_GPL(gxio_mpipe_iqueue_init);
int gxio_mpipe_equeue_init(gxio_mpipe_equeue_t *equeue,
gxio_mpipe_context_t *context,
unsigned int edma_ring_id,
unsigned int ering,
unsigned int channel,
void *mem, unsigned int mem_size,
unsigned int mem_flags)
......@@ -394,7 +394,7 @@ int gxio_mpipe_equeue_init(gxio_mpipe_equeue_t *equeue,
/* Offset used to read number of completed commands. */
MPIPE_EDMA_POST_REGION_ADDR_t offset;
int result = gxio_mpipe_init_edma_ring(context, edma_ring_id, channel,
int result = gxio_mpipe_init_edma_ring(context, ering, channel,
mem, mem_size, mem_flags);
if (result < 0)
return result;
......@@ -405,7 +405,7 @@ int gxio_mpipe_equeue_init(gxio_mpipe_equeue_t *equeue,
offset.region =
MPIPE_MMIO_ADDR__REGION_VAL_EDMA -
MPIPE_MMIO_ADDR__REGION_VAL_IDMA;
offset.ring = edma_ring_id;
offset.ring = ering;
__gxio_dma_queue_init(&equeue->dma_queue,
context->mmio_fast_base + offset.word,
......@@ -413,6 +413,9 @@ int gxio_mpipe_equeue_init(gxio_mpipe_equeue_t *equeue,
equeue->edescs = mem;
equeue->mask_num_entries = num_entries - 1;
equeue->log2_num_entries = __builtin_ctz(num_entries);
equeue->context = context;
equeue->ering = ering;
equeue->channel = channel;
return 0;
}
......@@ -543,3 +546,12 @@ int gxio_mpipe_link_close(gxio_mpipe_link_t *link)
}
EXPORT_SYMBOL_GPL(gxio_mpipe_link_close);
int gxio_mpipe_link_set_attr(gxio_mpipe_link_t *link, uint32_t attr,
int64_t val)
{
return gxio_mpipe_link_set_attr_aux(link->context, link->mac, attr,
val);
}
EXPORT_SYMBOL_GPL(gxio_mpipe_link_set_attr);
......@@ -44,10 +44,12 @@
#define GXIO_MPIPE_OP_REGISTER_CLIENT_MEMORY IORPC_OPCODE(IORPC_FORMAT_NONE_NOUSER, 0x1210)
#define GXIO_MPIPE_OP_LINK_OPEN_AUX IORPC_OPCODE(IORPC_FORMAT_NONE, 0x1211)
#define GXIO_MPIPE_OP_LINK_CLOSE_AUX IORPC_OPCODE(IORPC_FORMAT_NONE, 0x1212)
#define GXIO_MPIPE_OP_LINK_SET_ATTR_AUX IORPC_OPCODE(IORPC_FORMAT_NONE, 0x1213)
#define GXIO_MPIPE_OP_GET_TIMESTAMP_AUX IORPC_OPCODE(IORPC_FORMAT_NONE_NOUSER, 0x121e)
#define GXIO_MPIPE_OP_SET_TIMESTAMP_AUX IORPC_OPCODE(IORPC_FORMAT_NONE_NOUSER, 0x121f)
#define GXIO_MPIPE_OP_ADJUST_TIMESTAMP_AUX IORPC_OPCODE(IORPC_FORMAT_NONE_NOUSER, 0x1220)
#define GXIO_MPIPE_OP_CONFIG_EDMA_RING_BLKS IORPC_OPCODE(IORPC_FORMAT_NONE, 0x1221)
#define GXIO_MPIPE_OP_ARM_POLLFD IORPC_OPCODE(IORPC_FORMAT_KERNEL_POLLFD, 0x9000)
#define GXIO_MPIPE_OP_CLOSE_POLLFD IORPC_OPCODE(IORPC_FORMAT_KERNEL_POLLFD, 0x9001)
#define GXIO_MPIPE_OP_GET_MMIO_BASE IORPC_OPCODE(IORPC_FORMAT_NONE_NOUSER, 0x8000)
......@@ -114,6 +116,8 @@ int gxio_mpipe_link_open_aux(gxio_mpipe_context_t * context,
int gxio_mpipe_link_close_aux(gxio_mpipe_context_t * context, int mac);
int gxio_mpipe_link_set_attr_aux(gxio_mpipe_context_t * context, int mac,
uint32_t attr, int64_t val);
int gxio_mpipe_get_timestamp_aux(gxio_mpipe_context_t * context, uint64_t * sec,
uint64_t * nsec, uint64_t * cycles);
......
......@@ -810,7 +810,7 @@ extern int gxio_mpipe_alloc_edma_rings(gxio_mpipe_context_t *context,
/* Initialize an eDMA ring, using the given memory and size.
*
* @param context An initialized mPIPE context.
* @param ring The eDMA ring index.
* @param ering The eDMA ring index.
* @param channel The channel to use. This must be one of the channels
* associated with the context's set of open links.
* @param mem A physically contiguous region of memory to be filled
......@@ -823,10 +823,37 @@ extern int gxio_mpipe_alloc_edma_rings(gxio_mpipe_context_t *context,
* ::GXIO_ERR_INVAL_MEMORY_SIZE on failure.
*/
extern int gxio_mpipe_init_edma_ring(gxio_mpipe_context_t *context,
unsigned int ring, unsigned int channel,
unsigned int ering, unsigned int channel,
void *mem, size_t mem_size,
unsigned int mem_flags);
/* Set the "max_blks", "min_snf_blks", and "db" fields of
* ::MPIPE_EDMA_RG_INIT_DAT_THRESH_t for a given edma ring.
*
* The global pool of dynamic blocks will be automatically adjusted.
*
* This function should not be called after any egress has been done
* on the edma ring.
*
* Most applications should just use gxio_mpipe_equeue_set_snf_size().
*
* @param context An initialized mPIPE context.
* @param ering The eDMA ring index.
* @param max_blks The number of blocks to dedicate to the ring
* (normally min_snf_blks + 1). Must be greater than min_snf_blocks.
* @param min_snf_blks The number of blocks which must be stored
* prior to starting to send the packet (normally 12).
* @param db Whether to allow use of dynamic blocks by the ring
* (normally 1).
*
* @return 0 on success, negative on error.
*/
extern int gxio_mpipe_config_edma_ring_blks(gxio_mpipe_context_t *context,
unsigned int ering,
unsigned int max_blks,
unsigned int min_snf_blks,
unsigned int db);
/*****************************************************************
* Classifier Program *
******************************************************************/
......@@ -1288,15 +1315,39 @@ typedef struct {
/* The log2() of the number of entries. */
unsigned long log2_num_entries;
/* The context. */
gxio_mpipe_context_t *context;
/* The ering. */
unsigned int ering;
/* The channel. */
unsigned int channel;
} gxio_mpipe_equeue_t;
/* Initialize an "equeue".
*
* Takes the equeue plus the same args as gxio_mpipe_init_edma_ring().
* This function uses gxio_mpipe_init_edma_ring() to initialize the
* underlying edma_ring using the provided arguments.
*
* @param equeue An egress queue to be initialized.
* @param context An initialized mPIPE context.
* @param ering The eDMA ring index.
* @param channel The channel to use. This must be one of the channels
* associated with the context's set of open links.
* @param mem A physically contiguous region of memory to be filled
* with a ring of ::gxio_mpipe_edesc_t structures.
* @param mem_size Number of bytes in the ring. Must be 512, 2048,
* 8192 or 65536, times 16 (i.e. sizeof(gxio_mpipe_edesc_t)).
* @param mem_flags ::gxio_mpipe_mem_flags_e memory flags.
*
* @return 0 on success, ::GXIO_MPIPE_ERR_BAD_EDMA_RING or
* ::GXIO_ERR_INVAL_MEMORY_SIZE on failure.
*/
extern int gxio_mpipe_equeue_init(gxio_mpipe_equeue_t *equeue,
gxio_mpipe_context_t *context,
unsigned int edma_ring_id,
unsigned int ering,
unsigned int channel,
void *mem, unsigned int mem_size,
unsigned int mem_flags);
......@@ -1494,6 +1545,37 @@ static inline int gxio_mpipe_equeue_is_complete(gxio_mpipe_equeue_t *equeue,
completion_slot, update);
}
/* Set the snf (store and forward) size for an equeue.
*
* The snf size for an equeue defaults to 1536, and encodes the size
* of the largest packet for which egress is guaranteed to avoid
* transmission underruns and/or corrupt checksums under heavy load.
*
* The snf size affects a global resource pool which cannot support,
* for example, all 24 equeues each requesting an snf size of 8K.
*
* To ensure that jumbo packets can be egressed properly, the snf size
* should be set to the size of the largest possible packet, which
* will usually be limited by the size of the app's largest buffer.
*
* This is a convenience wrapper around
* gxio_mpipe_config_edma_ring_blks().
*
* This function should not be called after any egress has been done
* on the equeue.
*
* @param equeue An egress queue initialized via gxio_mpipe_equeue_init().
* @param size The snf size, in bytes.
* @return Zero on success, negative error otherwise.
*/
static inline int gxio_mpipe_equeue_set_snf_size(gxio_mpipe_equeue_t *equeue,
size_t size)
{
int blks = (size + 127) / 128;
return gxio_mpipe_config_edma_ring_blks(equeue->context, equeue->ering,
blks + 1, blks, 1);
}
/*****************************************************************
* Link Management *
******************************************************************/
......@@ -1697,6 +1779,17 @@ static inline int gxio_mpipe_link_channel(gxio_mpipe_link_t *link)
return link->channel;
}
/* Set a link attribute.
*
* @param link A properly initialized link state object.
* @param attr An attribute from the set of @ref gxio_mpipe_link_attrs.
* @param val New value of the attribute.
* @return 0 if the attribute was successfully set, or a negative error
* code.
*/
extern int gxio_mpipe_link_set_attr(gxio_mpipe_link_t *link, uint32_t attr,
int64_t val);
///////////////////////////////////////////////////////////////////
// Timestamp //
///////////////////////////////////////////////////////////////////
......
This diff is collapsed.
Markdown is supported
0%
or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment