ISDN: Move AVM Config.help entries to right dir

(Christoph Hellwig)

drivers/isdn/capi/Config.help

@@ -29,36 +29,3 @@ CONFIG_ISDN_CAPI_CAPIDRV
   supported by a CAPI driver, but still want to use old features like
   ippp interfaces or ttyI emulation, say Y/M here.
 
-CONFIG_ISDN_DRV_AVMB1_B1ISA
-  Enable support for the ISA version of the AVM B1 card.
-
-CONFIG_ISDN_DRV_AVMB1_B1PCI
-  Enable support for the PCI version of the AVM B1 card.
-
-CONFIG_ISDN_DRV_AVMB1_B1PCIV4
-  Enable support for the V4 version of AVM B1 PCI card.
-
-CONFIG_ISDN_DRV_AVMB1_T1ISA
-  Enable support for the AVM T1 T1B card.
-  Note: This is a PRI card and handle 30 B-channels.
-
-CONFIG_ISDN_DRV_AVMB1_B1PCMCIA
-  Enable support for the PCMCIA version of the AVM B1 card.
-
-CONFIG_ISDN_DRV_AVMB1_AVM_CS
-  Enable the PCMCIA client driver for the AVM B1/M1/M2
-  PCMCIA cards.
-
-CONFIG_ISDN_DRV_AVMB1_T1PCI
-  Enable support for the AVM T1 T1B card.
-  Note: This is a PRI card and handle 30 B-channels.
-
-CONFIG_ISDN_DRV_AVMB1_C4
-  Enable support for the AVM C4/C2 PCI cards.
-  These cards handle 4/2 BRI ISDN lines (8/4 channels).
-
-CONFIG_ISDN_DRV_AVMB1_VERBOSE_REASON
-  If you say Y here, the AVM B1 driver will give verbose reasons for
-  disconnecting. This will increase the size of the kernel by 7 KB. If
-  unsure, say Y.
-

drivers/isdn/hardware/avm/Config.help

+CONFIG_CAPI_AVM
+  Enable support for AVM active ISDN cards.
+
+CONFIG_ISDN_DRV_AVMB1_B1ISA
+  Enable support for the ISA version of the AVM B1 card.
+
+CONFIG_ISDN_DRV_AVMB1_B1PCI
+  Enable support for the PCI version of the AVM B1 card.
+
+CONFIG_ISDN_DRV_AVMB1_B1PCIV4
+  Enable support for the V4 version of AVM B1 PCI card.
+
+CONFIG_ISDN_DRV_AVMB1_T1ISA
+  Enable support for the AVM T1 T1B card.
+  Note: This is a PRI card and handle 30 B-channels.
+
+CONFIG_ISDN_DRV_AVMB1_B1PCMCIA
+  Enable support for the PCMCIA version of the AVM B1 card.
+
+CONFIG_ISDN_DRV_AVMB1_AVM_CS
+  Enable the PCMCIA client driver for the AVM B1/M1/M2
+  PCMCIA cards.
+
+CONFIG_ISDN_DRV_AVMB1_T1PCI
+  Enable support for the AVM T1 T1B card.
+  Note: This is a PRI card and handle 30 B-channels.
+
+CONFIG_ISDN_DRV_AVMB1_C4
+  Enable support for the AVM C4/C2 PCI cards.
+  These cards handle 4/2 BRI ISDN lines (8/4 channels).
+
+CONFIG_ISDN_DRV_AVMB1_VERBOSE_REASON
+  If you say Y here, the AVM B1 driver will give verbose reasons for
+  disconnecting. This will increase the size of the kernel by 7 KB. If
+  unsure, say Y.
+