Commit 26c95642 authored by Linus Torvalds's avatar Linus Torvalds

Merge tag 'mips-fixes_6.0_2' of git://git.kernel.org/pub/scm/linux/kernel/git/mips/linux

Pull MIPS fixes from Thomas Bogendoerfer:

 - fix missing export for Lantiq watchdog driver

 - fix ethernet phy interface setup for Loongson32

* tag 'mips-fixes_6.0_2' of git://git.kernel.org/pub/scm/linux/kernel/git/mips/linux:
  MIPS: Loongson32: Fix PHY-mode being left unspecified
  MIPS: lantiq: export clk_get_io() for lantiq_wdt.ko
parents 88e6546b e9f3f8f4
......@@ -50,6 +50,7 @@ struct clk *clk_get_io(void)
{
return &cpu_clk_generic[2];
}
EXPORT_SYMBOL_GPL(clk_get_io);
struct clk *clk_get_ppe(void)
{
......
......@@ -98,7 +98,7 @@ int ls1x_eth_mux_init(struct platform_device *pdev, void *priv)
if (plat_dat->bus_id) {
__raw_writel(__raw_readl(LS1X_MUX_CTRL0) | GMAC1_USE_UART1 |
GMAC1_USE_UART0, LS1X_MUX_CTRL0);
switch (plat_dat->interface) {
switch (plat_dat->phy_interface) {
case PHY_INTERFACE_MODE_RGMII:
val &= ~(GMAC1_USE_TXCLK | GMAC1_USE_PWM23);
break;
......@@ -107,12 +107,12 @@ int ls1x_eth_mux_init(struct platform_device *pdev, void *priv)
break;
default:
pr_err("unsupported mii mode %d\n",
plat_dat->interface);
plat_dat->phy_interface);
return -ENOTSUPP;
}
val &= ~GMAC1_SHUT;
} else {
switch (plat_dat->interface) {
switch (plat_dat->phy_interface) {
case PHY_INTERFACE_MODE_RGMII:
val &= ~(GMAC0_USE_TXCLK | GMAC0_USE_PWM01);
break;
......@@ -121,7 +121,7 @@ int ls1x_eth_mux_init(struct platform_device *pdev, void *priv)
break;
default:
pr_err("unsupported mii mode %d\n",
plat_dat->interface);
plat_dat->phy_interface);
return -ENOTSUPP;
}
val &= ~GMAC0_SHUT;
......@@ -131,7 +131,7 @@ int ls1x_eth_mux_init(struct platform_device *pdev, void *priv)
plat_dat = dev_get_platdata(&pdev->dev);
val &= ~PHY_INTF_SELI;
if (plat_dat->interface == PHY_INTERFACE_MODE_RMII)
if (plat_dat->phy_interface == PHY_INTERFACE_MODE_RMII)
val |= 0x4 << PHY_INTF_SELI_SHIFT;
__raw_writel(val, LS1X_MUX_CTRL1);
......@@ -146,9 +146,9 @@ static struct plat_stmmacenet_data ls1x_eth0_pdata = {
.bus_id = 0,
.phy_addr = -1,
#if defined(CONFIG_LOONGSON1_LS1B)
.interface = PHY_INTERFACE_MODE_MII,
.phy_interface = PHY_INTERFACE_MODE_MII,
#elif defined(CONFIG_LOONGSON1_LS1C)
.interface = PHY_INTERFACE_MODE_RMII,
.phy_interface = PHY_INTERFACE_MODE_RMII,
#endif
.mdio_bus_data = &ls1x_mdio_bus_data,
.dma_cfg = &ls1x_eth_dma_cfg,
......@@ -186,7 +186,7 @@ struct platform_device ls1x_eth0_pdev = {
static struct plat_stmmacenet_data ls1x_eth1_pdata = {
.bus_id = 1,
.phy_addr = -1,
.interface = PHY_INTERFACE_MODE_MII,
.phy_interface = PHY_INTERFACE_MODE_MII,
.mdio_bus_data = &ls1x_mdio_bus_data,
.dma_cfg = &ls1x_eth_dma_cfg,
.has_gmac = 1,
......
Markdown is supported
0%
or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment