gianfar: Convert to use netdev_ops

Signed-off-by: Andy Fleming <afleming@freescale.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

drivers/net/gianfar.c

@@ -140,11 +140,26 @@ static void gfar_halt_nodisable(struct net_device *dev);
 void gfar_start(struct net_device *dev);
 static void gfar_clear_exact_match(struct net_device *dev);
 static void gfar_set_mac_for_addr(struct net_device *dev, int num, u8 *addr);
+static int gfar_ioctl(struct net_device *dev, struct ifreq *rq, int cmd);
 
 MODULE_AUTHOR("Freescale Semiconductor, Inc");
 MODULE_DESCRIPTION("Gianfar Ethernet Driver");
 MODULE_LICENSE("GPL");
 
+static const struct net_device_ops gfar_netdev_ops = {
+	.ndo_open = gfar_enet_open,
+	.ndo_start_xmit = gfar_start_xmit,
+	.ndo_stop = gfar_close,
+	.ndo_change_mtu = gfar_change_mtu,
+	.ndo_set_multicast_list = gfar_set_multi,
+	.ndo_tx_timeout = gfar_timeout,
+	.ndo_do_ioctl = gfar_ioctl,
+	.ndo_vlan_rx_register = gfar_vlan_rx_register,
+#ifdef CONFIG_NET_POLL_CONTROLLER
+	.ndo_poll_controller = gfar_netpoll,
+#endif
+};
+
 /* Returns 1 if incoming frames use an FCB */
 static inline int gfar_uses_fcb(struct gfar_private *priv)
 {
@@ -390,21 +405,12 @@ static int gfar_probe(struct of_device *ofdev,
 	SET_NETDEV_DEV(dev, &ofdev->dev);
 
 	/* Fill in the dev structure */
-	dev->open = gfar_enet_open;
-	dev->hard_start_xmit = gfar_start_xmit;
-	dev->tx_timeout = gfar_timeout;
 	dev->watchdog_timeo = TX_TIMEOUT;
 	netif_napi_add(dev, &priv->napi, gfar_poll, GFAR_DEV_WEIGHT);
-#ifdef CONFIG_NET_POLL_CONTROLLER
-	dev->poll_controller = gfar_netpoll;
-#endif
-	dev->stop = gfar_close;
-	dev->change_mtu = gfar_change_mtu;
 	dev->mtu = 1500;
-	dev->set_multicast_list = gfar_set_multi;
 
+	dev->netdev_ops = &gfar_netdev_ops;
 	dev->ethtool_ops = &gfar_ethtool_ops;
-	dev->do_ioctl = gfar_ioctl;
 
 	if (priv->device_flags & FSL_GIANFAR_DEV_HAS_CSUM) {
 		priv->rx_csum_enable = 1;
@@ -414,11 +420,8 @@ static int gfar_probe(struct of_device *ofdev,
 
 	priv->vlgrp = NULL;
 
-	if (priv->device_flags & FSL_GIANFAR_DEV_HAS_VLAN) {
-		dev->vlan_rx_register = gfar_vlan_rx_register;
-
+	if (priv->device_flags & FSL_GIANFAR_DEV_HAS_VLAN)
 		dev->features |= NETIF_F_HW_VLAN_TX | NETIF_F_HW_VLAN_RX;
-	}
 
 	if (priv->device_flags & FSL_GIANFAR_DEV_HAS_EXTENDED_HASH) {
 		priv->extended_hash = 1;