Commit 27e53cfb authored by Andrew Lunn's avatar Andrew Lunn Committed by Mike Turquette

ARM: Orion: PCIE: Add support for clk

Prepare and enable the clocks when the board indicates the pcie buses
will be used.
Signed-off-by: default avatarAndrew Lunn <andrew@lunn.ch>
Tested-by: default avatarJamie Lentin <jm@lentin.co.uk>
Signed-off-by: default avatarMike Turquette <mturquette@linaro.org>
parent c510182b
......@@ -87,7 +87,7 @@ static struct clk __init *kirkwood_register_gate(const char *name, u8 bit_idx)
void __init kirkwood_clk_init(void)
{
struct clk *runit, *ge0, *ge1, *sata0, *sata1, *usb0, *sdio;
struct clk *crypto, *xor0, *xor1;
struct clk *crypto, *xor0, *xor1, *pex0, *pex1;
tclk = clk_register_fixed_rate(NULL, "tclk", NULL,
CLK_IS_ROOT, kirkwood_tclk);
......@@ -102,8 +102,8 @@ void __init kirkwood_clk_init(void)
crypto = kirkwood_register_gate("crypto", CGC_BIT_CRYPTO);
xor0 = kirkwood_register_gate("xor0", CGC_BIT_XOR0);
xor1 = kirkwood_register_gate("xor1", CGC_BIT_XOR1);
kirkwood_register_gate("pex0", CGC_BIT_PEX0);
kirkwood_register_gate("pex1", CGC_BIT_PEX1);
pex0 = kirkwood_register_gate("pex0", CGC_BIT_PEX0);
pex1 = kirkwood_register_gate("pex1", CGC_BIT_PEX1);
kirkwood_register_gate("audio", CGC_BIT_AUDIO);
kirkwood_register_gate("tdm", CGC_BIT_TDM);
kirkwood_register_gate("tsu", CGC_BIT_TSU);
......@@ -122,6 +122,8 @@ void __init kirkwood_clk_init(void)
orion_clkdev_add(NULL, "mv_crypto", crypto);
orion_clkdev_add(NULL, MV_XOR_SHARED_NAME ".0", xor0);
orion_clkdev_add(NULL, MV_XOR_SHARED_NAME ".1", xor1);
orion_clkdev_add("0", "pcie", pex0);
orion_clkdev_add("1", "pcie", pex1);
}
/*****************************************************************************
......
......@@ -11,6 +11,7 @@
#include <linux/kernel.h>
#include <linux/pci.h>
#include <linux/slab.h>
#include <linux/clk.h>
#include <video/vga.h>
#include <asm/irq.h>
#include <asm/mach/pci.h>
......@@ -19,6 +20,23 @@
#include <plat/addr-map.h>
#include "common.h"
static void kirkwood_enable_pcie_clk(const char *port)
{
struct clk *clk;
clk = clk_get_sys("pcie", port);
if (IS_ERR(clk)) {
printk(KERN_ERR "PCIE clock %s missing\n", port);
return;
}
clk_prepare_enable(clk);
clk_put(clk);
}
/* This function is called very early in the boot when probing the
hardware to determine what we actually are, and what rate tclk is
ticking at. Hence calling kirkwood_enable_pcie_clk() is not
possible since the clk tree has not been created yet. */
void kirkwood_enable_pcie(void)
{
u32 curr = readl(CLOCK_GATING_CTRL);
......@@ -183,10 +201,12 @@ static int __init kirkwood_pcie_setup(int nr, struct pci_sys_data *sys)
switch (index) {
case 0:
kirkwood_clk_ctrl |= CGC_PEX0;
kirkwood_enable_pcie_clk("0");
pcie0_ioresources_init(pp);
break;
case 1:
kirkwood_clk_ctrl |= CGC_PEX1;
kirkwood_enable_pcie_clk("1");
pcie1_ioresources_init(pp);
break;
default:
......
Markdown is supported
0%
or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment