V4L/DVB (12822): tm6000: Add support for tm6010

Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>

drivers/staging/tm6000/tm6000-cards.c

@@ -34,11 +34,12 @@
 #define TM6000_BOARD_UNKNOWN			0
 #define TM5600_BOARD_GENERIC			1
 #define TM6000_BOARD_GENERIC			2
-#define TM5600_BOARD_10MOONS_UT821		3
-#define TM5600_BOARD_10MOONS_UT330		4
-#define TM6000_BOARD_ADSTECH_DUAL_TV		5
-#define TM6000_BOARD_FREECOM_AND_SIMILAR	6
-#define TM6000_BOARD_ADSTECH_MINI_DUAL_TV	7
+#define TM6010_BOARD_GENERIC			3
+#define TM5600_BOARD_10MOONS_UT821		4
+#define TM5600_BOARD_10MOONS_UT330		5
+#define TM6000_BOARD_ADSTECH_DUAL_TV		6
+#define TM6000_BOARD_FREECOM_AND_SIMILAR	7
+#define TM6000_BOARD_ADSTECH_MINI_DUAL_TV	8
 
 #define TM6000_MAXBOARDS        16
 static unsigned int card[]     = {[0 ... (TM6000_MAXBOARDS - 1)] = UNSET };
@@ -53,6 +54,7 @@ struct tm6000_board {
 
 	struct tm6000_capabilities caps;
 
+	enum		tm6000_devtype type;	/* variant of the chipset */
 	int             tuner_type;     /* type of the tuner */
 	int             tuner_addr;     /* tuner address */
 	int             demod_addr;     /* demodulator address */
@@ -69,6 +71,7 @@ struct tm6000_board tm6000_boards[] = {
 	},
 	[TM5600_BOARD_GENERIC] = {
 		.name         = "Generic tm5600 board",
+		.type         = TM5600,
 		.tuner_type   = TUNER_XC2028,
 		.tuner_addr   = 0xc2,
 		.caps = {
@@ -86,9 +89,21 @@ struct tm6000_board tm6000_boards[] = {
 		},
 		.gpio_addr_tun_reset = TM6000_GPIO_1,
 	},
+	[TM6010_BOARD_GENERIC] = {
+		.name         = "Generic tm6010 board",
+		.type         = TM6010,
+		.tuner_type   = TUNER_XC2028,
+		.tuner_addr   = 0xc2,
+		.caps = {
+			.has_tuner	= 1,
+			.has_dvb	= 1,
+		},
+		.gpio_addr_tun_reset = TM6010_GPIO_4,
+	},
 	[TM5600_BOARD_10MOONS_UT821] = {
 		.name         = "10Moons UT 821",
 		.tuner_type   = TUNER_XC2028,
+		.type         = TM5600,
 		.tuner_addr   = 0xc2,
 		.caps = {
 			.has_tuner    = 1,
@@ -151,6 +166,7 @@ struct tm6000_board tm6000_boards[] = {
 /* table of devices that work with this driver */
 struct usb_device_id tm6000_id_table [] = {
 	{ USB_DEVICE(0x6000, 0x0001), .driver_info = TM5600_BOARD_10MOONS_UT821 },
+	{ USB_DEVICE(0x6000, 0x0002), .driver_info = TM6010_BOARD_GENERIC },
 	{ USB_DEVICE(0x06e1, 0xf332), .driver_info = TM6000_BOARD_ADSTECH_DUAL_TV },
 	{ USB_DEVICE(0x14aa, 0x0620), .driver_info = TM6000_BOARD_FREECOM_AND_SIMILAR },
 	{ USB_DEVICE(0x06e1, 0xb339), .driver_info = TM6000_BOARD_ADSTECH_MINI_DUAL_TV },
@@ -167,7 +183,11 @@ static void tm6000_config_tuner (struct tm6000_core *dev)
 	request_module ("tuner");
 
 	if (dev->tuner_type == TUNER_XC2028) {
+		if (dev->dev_type == TM6010)
+			ctl.fname = "xc3028-v27.fw";
+		else
 			ctl.fname = "tm6000-xc3028.fw";
+
 		ctl.mts   = 1;
 
 		xc2028_cfg.tuner = TUNER_XC2028;
@@ -189,6 +209,7 @@ static int tm6000_init_dev(struct tm6000_core *dev)
 	mutex_lock(&dev->lock);
 
 	/* Initializa board-specific data */
+	dev->dev_type   = tm6000_boards[dev->model].type;
 	dev->tuner_type = tm6000_boards[dev->model].tuner_type;
 	dev->tuner_addr = tm6000_boards[dev->model].tuner_addr;
 	dev->tuner_reset_gpio = tm6000_boards[dev->model].gpio_addr_tun_reset;

drivers/staging/tm6000/tm6000-regs.h

@@ -54,6 +54,7 @@
 
 #define TM6000_GPIO_CLK		0x101
 #define TM6000_GPIO_DATA	0x100
+
 #define TM6000_GPIO_1		0x102
 #define TM6000_GPIO_2		0x103
 #define TM6000_GPIO_3		0x104
@@ -62,6 +63,16 @@
 #define TM6000_GPIO_6		0x304
 #define TM6000_GPIO_7		0x305
 
+/* tm6010 defines GPIO with different values */
+#define TM6010_GPIO_0      0x0102
+#define TM6010_GPIO_1      0x0103
+#define TM6010_GPIO_2      0x0104
+#define TM6010_GPIO_3      0x0105
+#define TM6010_GPIO_4      0x0106
+#define TM6010_GPIO_5      0x0107
+#define TM6010_GPIO_6      0x0300
+#define TM6010_GPIO_7      0x0301
+#define TM6010_GPIO_9      0x0305
 /*
  * Define TV Master TM5600/TM6000 URB message codes and length
  */

drivers/staging/tm6000/tm6000-stds.c

@@ -781,11 +781,8 @@ static int tm6000_load_std(struct tm6000_core *dev,
 		if (!set[i].req)
 			return 0;
 
-		/* FIXME: REQ 8 settings are for tm6010
-			not tested yet
-			This doesn't work with tm5600
-		*/
-		if (set[i].req == REQ_08_SET_GET_AVREG_BIT)
+		if ((dev->dev_type != TM6010) &&
+		    (set[i].req == REQ_08_SET_GET_AVREG_BIT))
 				continue;
 
 		rc = tm6000_set_reg(dev, set[i].req, set[i].reg, set[i].value);
@@ -871,5 +868,6 @@ int tm6000_set_standard(struct tm6000_core *dev, v4l2_std_id * norm)
 
 	msleep(40);
 
+
 	return 0;
 }

drivers/staging/tm6000/tm6000.h

@@ -45,6 +45,11 @@ enum tm6000_itype {
 	TM6000_INPUT_SVIDEO,
 };
 
+enum tm6000_devtype {
+	TM6000 = 0,
+	TM5600,
+	TM6010,
+};
 
 /* ------------------------------------------------------------------
 	Basic structures
@@ -121,6 +126,7 @@ struct tm6000_core {
 	char				name[30];	/* name (including minor) of the device */
 	int				model;		/* index in the device_data struct */
 	int				devno;		/* marks the number of this device */
+	enum tm6000_devtype		dev_type;	/* type of device */
 
 	v4l2_std_id                     norm;           /* Current norm */
 	int				width,height;	/* Selected resolution */