Commit e30b9d6c authored by Chris Pascoe's avatar Chris Pascoe Committed by Mauro Carvalho Chehab

V4L/DVB (12821): tm6000: update USB request names and clean up i2c routine

Update the descriptions of the USB request types so that they match what
we now know they do.

Rework the i2c_xfer function so that it is more explicit what sort of I2C
transfers it is that the tm6000 can't perform.
Signed-off-by: default avatarChris Pascoe <c.pascoe@itee.uq.edu.au>
Signed-off-by: default avatarMauro Carvalho Chehab <mchehab@redhat.com>
parent cf9e1509
......@@ -73,7 +73,7 @@ static int tm6000_i2c_scan(struct i2c_adapter *i2c_adap, int addr)
/* This sends addr + 1 byte with 0 */
rc = tm6000_read_write_usb (dev,
USB_DIR_IN | USB_TYPE_VENDOR,
REQ_16_SET_GET_I2CSEQ,
REQ_16_SET_GET_I2C_WR1_RDN,
addr, 0,
buf, 0);
msleep(10);
......@@ -94,82 +94,61 @@ static int tm6000_i2c_xfer(struct i2c_adapter *i2c_adap,
{
struct tm6000_core *dev = i2c_adap->algo_data;
int addr, rc, i, byte;
int prev_reg = -1;
if (num <= 0)
return 0;
for (i = 0; i < num; i++) {
addr = (msgs[i].addr << 1) &0xff;
addr = (msgs[i].addr << 1) & 0xff;
i2c_dprintk(2,"%s %s addr=0x%x len=%d:",
(msgs[i].flags & I2C_M_RD) ? "read" : "write",
i == num - 1 ? "stop" : "nonstop", addr, msgs[i].len);
if (!msgs[i].len) {
/* Do I2C scan */
rc=tm6000_i2c_scan(i2c_adap, addr);
rc = tm6000_i2c_scan(i2c_adap, addr);
} else if (msgs[i].flags & I2C_M_RD) {
/* Read bytes */
/* I2C is assumed to have always a subaddr at the first byte of the
message bus. Also, the first i2c value of the answer is returned
out of message data.
*/
/* SMBus Read Byte command */
if (prev_reg < 0)
printk("XXX read from unknown prev_reg\n");
rc = tm6000_read_write_usb (dev,
USB_DIR_IN | USB_TYPE_VENDOR | USB_RECIP_DEVICE,
REQ_16_SET_GET_I2CSEQ,
addr | (prev_reg << 8), 0,
msgs[i].buf, msgs[i].len);
if (prev_reg >= 0)
prev_reg += msgs[i].len;
if (i2c_debug>=2) {
for (byte = 0; byte < msgs[i].len; byte++) {
/* read request without preceding register selection */
/*
* The TM6000 only supports a read transaction
* immediately after a 1 or 2 byte write to select
* a register. We cannot fulfil this request.
*/
i2c_dprintk(2, " read without preceding write not"
" supported");
rc = -EOPNOTSUPP;
goto err;
} else if (i + 1 < num && msgs[i].len <= 2 &&
(msgs[i + 1].flags & I2C_M_RD) &&
msgs[i].addr == msgs[i + 1].addr) {
/* 1 or 2 byte write followed by a read */
if (i2c_debug >= 2)
for (byte = 0; byte < msgs[i].len; byte++)
printk(" %02x", msgs[i].buf[byte]);
}
}
} else if (i+1 < num && msgs[i].len == 2 &&
(msgs[i+1].flags & I2C_M_RD) &&
msgs[i].addr == msgs[i+1].addr) {
i2c_dprintk(2, "msg %d: write 2, read %d", i,
msgs[i+1].len);
/* Write 2 Read N command */
i2c_dprintk(2, "; joined to read %s len=%d:",
i == num - 2 ? "stop" : "nonstop",
msgs[i + 1].len);
rc = tm6000_read_write_usb (dev,
USB_DIR_IN | USB_TYPE_VENDOR | USB_RECIP_DEVICE,
REQ_14_SET_GET_EEPROM_PAGE, /* XXX wrong name */
addr | msgs[i].buf[0] << 8, msgs[i].buf[1],
msgs[i+1].buf, msgs[i+1].len);
msgs[i].len == 1 ? REQ_16_SET_GET_I2C_WR1_RDN
: REQ_14_SET_GET_I2C_WR2_RDN,
addr | msgs[i].buf[0] << 8,
msgs[i].len == 1 ? 0 : msgs[i].buf[1],
msgs[i + 1].buf, msgs[i + 1].len);
i++;
if (i2c_debug>=2) {
for (byte = 0; byte < msgs[i].len; byte++) {
if (i2c_debug >= 2)
for (byte = 0; byte < msgs[i].len; byte++)
printk(" %02x", msgs[i].buf[byte]);
}
}
prev_reg = -1;
} else {
/* write bytes */
if (i2c_debug>=2) {
if (i2c_debug >= 2)
for (byte = 0; byte < msgs[i].len; byte++)
printk(" %02x", msgs[i].buf[byte]);
}
/* SMBus Write Byte command followed by a read command */
if(msgs[i].len == 1 && i+1 < num && msgs[i+1].flags & I2C_M_RD
&& msgs[i+1].addr == msgs[i].addr) {
prev_reg = msgs[i].buf[0];
if (i2c_debug >= 2)
printk("\n");
continue;
}
rc = tm6000_read_write_usb (dev,
rc = tm6000_read_write_usb(dev,
USB_DIR_OUT | USB_TYPE_VENDOR | USB_RECIP_DEVICE,
REQ_16_SET_GET_I2CSEQ,
addr|(*msgs[i].buf)<<8, 0,
msgs[i].buf+1, msgs[i].len-1);
prev_reg = -1;
REQ_16_SET_GET_I2C_WR1_RDN,
addr | msgs[i].buf[0] << 8, 0,
msgs[i].buf + 1, msgs[i].len - 1);
}
if (i2c_debug>=2)
if (i2c_debug >= 2)
printk("\n");
if (rc < 0)
goto err;
......@@ -181,7 +160,6 @@ static int tm6000_i2c_xfer(struct i2c_adapter *i2c_adap,
return rc;
}
static int tm6000_i2c_eeprom(struct tm6000_core *dev,
unsigned char *eedata, int len)
{
......@@ -196,7 +174,7 @@ static int tm6000_i2c_eeprom(struct tm6000_core *dev,
*p = i;
rc = tm6000_read_write_usb (dev,
USB_DIR_IN | USB_TYPE_VENDOR | USB_RECIP_DEVICE,
REQ_16_SET_GET_I2CSEQ, 0xa0 | i<<8, 0, p, 1);
REQ_16_SET_GET_I2C_WR1_RDN, 0xa0 | i<<8, 0, p, 1);
if (rc < 1) {
if (p == eedata)
goto noeeprom;
......@@ -273,7 +251,7 @@ static void dec_use(struct i2c_adapter *adap)
#define mass_write(addr, reg, data...) \
{ const static u8 _val[] = data; \
rc=tm6000_read_write_usb(dev,USB_DIR_OUT | USB_TYPE_VENDOR, \
REQ_16_SET_GET_I2CSEQ,(reg<<8)+addr, 0x00, (u8 *) _val, \
REQ_16_SET_GET_I2C_WR1_RDN,(reg<<8)+addr, 0x00, (u8 *) _val, \
ARRAY_SIZE(_val)); \
if (rc<0) { \
printk(KERN_ERR "Error on line %d: %d\n",__LINE__,rc); \
......
......@@ -38,11 +38,11 @@
#define REQ_11_SET_EEPROM_ADDR 11
#define REQ_12_SET_GET_EEPROMBYTE 12
#define REQ_13_GET_EEPROM_SEQREAD 13
#define REQ_14_SET_GET_EEPROM_PAGE 14
#define REQ_14_SET_GET_I2C_WR2_RDN 14
#define REQ_15_SET_GET_I2CBYTE 15
/* Write: Subaddr, Slave Addr, value, 0 */
/* Read : Subaddr, Slave Addr, value, 1 */
#define REQ_16_SET_GET_I2CSEQ 16
#define REQ_16_SET_GET_I2C_WR1_RDN 16
/* Subaddr, Slave Addr, 0, length */
#define REQ_17_SET_GET_I2CFP 17
/* Write: Slave Addr, register, value */
......
Markdown is supported
0%
or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment