Staging: vt6656: removed '#if 0' definitions

Removed code in .c files that was being skipped by the preprocessor
Signed-off-by: Andres More <more.andres@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

drivers/staging/vt6656/bssdb.c

@@ -716,28 +716,6 @@ BOOL BSSbUpdateToBSSList(void *hDeviceContext,
         pBSSList->uIELength = WLAN_BEACON_FR_MAXLEN;
     memcpy(pBSSList->abyIEs, pbyIEs, pBSSList->uIELength);
 
-//mike add: if  the AP in this pBSSList is hidden ssid and we can find two of them,
-//                  you need upgrade the other related pBSSList of which ssid is obvious,
-//                  for these two AP is the same one!!!!
-/********judge by:BSSID is the same,but ssid is different!*****************/
-#if 0
-   for (ii = 0; ii < MAX_BSS_NUM; ii++) {
-      if (IS_ETH_ADDRESS_EQUAL(pMgmt->sBSSList[ii].abyBSSID, pBSSList->abyBSSID)) {   //BSSID is the same!
-         if (memcmp(((PWLAN_IE_SSID)pMgmt->sBSSList[ii].abySSID)->abySSID,                  //ssid is different??
-		 	      ((PWLAN_IE_SSID)pBSSList->abySSID)->abySSID,
-		 	      ((PWLAN_IE_SSID)pBSSList->abySSID)->len) != 0) {
-                  //reserve temp
-               memset(abyTmpSSID,0,sizeof(abyTmpSSID));
-	      memcpy(abyTmpSSID,pMgmt->sBSSList[ii].abySSID,sizeof(abyTmpSSID));
-		  //upgrade the other one pBSSList
-	      memcpy(&(pMgmt->sBSSList[ii]),pBSSList,sizeof(KnownBSS));
-		  //recover ssid info
-	      memcpy(pMgmt->sBSSList[ii].abySSID,abyTmpSSID,sizeof(abyTmpSSID));
-           }
-       }
-    }
-#endif
-
     return TRUE;
 }
 

drivers/staging/vt6656/iwctl.c

@@ -1926,26 +1926,6 @@ param->u.wpa_key.key = (u8 *)key_array;
 param->u.wpa_key.seq = (u8 *)seq;
 param->u.wpa_key.seq_len = seq_len;
 
-#if 0
-printk("param->u.wpa_key.alg_name =%d\n",param->u.wpa_key.alg_name);
-printk("param->addr=%02x:%02x:%02x:%02x:%02x:%02x\n",
-	      param->addr[0],param->addr[1],param->addr[2],
-	      param->addr[3],param->addr[4],param->addr[5]);
-printk("param->u.wpa_key.set_tx =%d\n",param->u.wpa_key.set_tx);
-printk("param->u.wpa_key.key_index =%d\n",param->u.wpa_key.key_index);
-printk("param->u.wpa_key.key_len =%d\n",param->u.wpa_key.key_len);
-printk("param->u.wpa_key.key =");
-for (ii = 0; ii < param->u.wpa_key.key_len; ii++)
-	printk(KERN_DEBUG "%02x:", param->u.wpa_key.key[ii]);
-printk("\n");
-printk("param->u.wpa_key.seq_len =%d\n",param->u.wpa_key.seq_len);
-printk("param->u.wpa_key.seq =");
-for (ii = 0; ii < param->u.wpa_key.seq_len; ii++)
-	printk(KERN_DEBUG "%02x:", param->u.wpa_key.seq[ii]);
-printk("\n");
-
-printk("...........\n");
-#endif
 //****set if current action is Network Manager count??
 //****this method is so foolish,but there is no other way???
 if(param->u.wpa_key.alg_name == WPA_ALG_NONE) {

drivers/staging/vt6656/main_usb.c

@@ -812,16 +812,6 @@ vt6656_probe(struct usb_interface *intf, const struct usb_device_id *id)
         return -ENODEV;
     }
 
-//2008-07-21-01<Add>by MikeLiu
-//register wpadev
-#if 0
-   if(wpa_set_wpadev(pDevice, 1)!=0) {
-     printk("Fail to Register WPADEV?\n");
-        unregister_netdev(pDevice->dev);
-        free_netdev(netdev);
-        kfree(pDevice);
-   }
-#endif
          usb_device_reset(pDevice);
 
 #ifdef SndEvt_ToAPI

drivers/staging/vt6656/rxtx.c

@@ -3071,28 +3071,12 @@ nsDMA_tx_packet(
         }
         else {
 
-#if 0
-            if((pDevice->fWPA_Authened == FALSE) &&
-		((pMgmt->eAuthenMode == WMAC_AUTH_WPAPSK)||(pMgmt->eAuthenMode = WMAC_AUTH_WPA2PSK))){
-                  dev_kfree_skb_irq(skb);
-                  pStats->tx_dropped++;
-                  return STATUS_FAILURE;
-            }
-	        else if (pTransmitKey == NULL) {
-                DBG_PRT(MSG_LEVEL_DEBUG, KERN_INFO"return no tx key\n");
-                dev_kfree_skb_irq(skb);
-                pStats->tx_dropped++;
-                return STATUS_FAILURE;
-            }
-#else
             if (pTransmitKey == NULL) {
                 DBG_PRT(MSG_LEVEL_DEBUG, KERN_INFO"return no tx key\n");
                 dev_kfree_skb_irq(skb);
                 pStats->tx_dropped++;
                 return STATUS_FAILURE;
             }
-#endif
-
         }
     }
 

drivers/staging/vt6656/usbpipe.c

@@ -381,17 +381,6 @@ PIPEnsInterruptRead(
     // Now that we have created the urb, we will send a
     // request to the USB device object.
     //
-#if 0            //reserve int URB submit
-	usb_fill_int_urb(pDevice->pInterruptURB,
-	                 pDevice->usb,
-	                 usb_rcvintpipe(pDevice->usb, 1),
-			 (void *) pDevice->intBuf.pDataBuf,
-	                 MAX_INTERRUPT_SIZE,
-	                 s_nsInterruptUsbIoCompleteRead,
-	                 pDevice,
-	                 pDevice->int_interval
-	                 );
-#else            //replace int URB submit by bulk transfer
 #ifndef Safe_Close
 	usb_fill_int_urb(pDevice->pInterruptURB,
 	                 pDevice->usb,
@@ -413,7 +402,6 @@ usb_fill_bulk_urb(pDevice->pInterruptURB,
 		MAX_INTERRUPT_SIZE,
 		s_nsInterruptUsbIoCompleteRead,
 		pDevice);
-#endif
 #endif
 
 	ntStatus = usb_submit_urb(pDevice->pInterruptURB, GFP_ATOMIC);
@@ -495,12 +483,6 @@ s_nsInterruptUsbIoCompleteRead(
 
 
     if (pDevice->fKillEventPollingThread != TRUE) {
-   #if 0               //reserve int URB submit
-	ntStatus = usb_submit_urb(urb, GFP_ATOMIC);
-	if (ntStatus != 0) {
-	    DBG_PRT(MSG_LEVEL_DEBUG, KERN_INFO"Re-Submit int URB failed %d\n", ntStatus);
-    }
-   #else                                                                                     //replace int URB submit by bulk transfer
     #ifdef Safe_Close
        usb_fill_bulk_urb(pDevice->pInterruptURB,
 		      pDevice->usb,
@@ -518,7 +500,6 @@ s_nsInterruptUsbIoCompleteRead(
     #else
         tasklet_schedule(&pDevice->EventWorkItem);
     #endif
-#endif
     }
     //
     // We return STATUS_MORE_PROCESSING_REQUIRED so that the completion

drivers/staging/vt6656/wcmd.c

@@ -716,18 +716,6 @@ void vRunCommand(void *hDeviceContext)
 	       return;
 	   }
 	          pDevice->byLinkWaitCount = 0;
-		 #if 0
-                     #ifdef WPA_SUPPLICANT_DRIVER_WEXT_SUPPORT
-                    // if(pDevice->bWPASuppWextEnabled == TRUE)
-                        {
-                  	union iwreq_data  wrqu;
-                  	memset(&wrqu, 0, sizeof (wrqu));
-                          wrqu.ap_addr.sa_family = ARPHRD_ETHER;
-                  	printk("wireless_send_event--->SIOCGIWAP(disassociated:AUTHENTICATE_WAIT_timeout)\n");
-                  	wireless_send_event(pDevice->dev, SIOCGIWAP, &wrqu, NULL);
-                       }
-                    #endif
-	         #endif
 
             s_bCommandComplete(pDevice);
             break;
@@ -785,18 +773,6 @@ void vRunCommand(void *hDeviceContext)
 	       return;
 	   }
 	          pDevice->byLinkWaitCount = 0;
-		#if 0
-                     #ifdef WPA_SUPPLICANT_DRIVER_WEXT_SUPPORT
-                    // if(pDevice->bWPASuppWextEnabled == TRUE)
-                        {
-                  	union iwreq_data  wrqu;
-                  	memset(&wrqu, 0, sizeof (wrqu));
-                          wrqu.ap_addr.sa_family = ARPHRD_ETHER;
-                  	printk("wireless_send_event--->SIOCGIWAP(disassociated:ASSOCIATE_WAIT_timeout)\n");
-                  	wireless_send_event(pDevice->dev, SIOCGIWAP, &wrqu, NULL);
-                       }
-                    #endif
-		#endif
 
             s_bCommandComplete(pDevice);
             break;