Commit 2a833a02 authored by Takashi Iwai's avatar Takashi Iwai

ALSA: echoaudio: Proper endian notations

Many data fields defined in echoaudio drivers are in little-endian,
hence they should be defined with __le16 or __le32.  This makes it
easier to catch the forgotten conversions.

Spotted by sparse, a warning like:
  sound/pci/echoaudio/echoaudio_dsp.c:990:36: warning: incorrect type in assignment (different base types)
Signed-off-by: default avatarTakashi Iwai <tiwai@suse.de>
parent 8c0ab942
......@@ -294,7 +294,7 @@
struct audiopipe {
volatile u32 *dma_counter; /* Commpage register that contains
volatile __le32 *dma_counter; /* Commpage register that contains
* the current dma position
* (lower 32 bits only)
*/
......
......@@ -73,19 +73,21 @@ register. write_control_reg sends the new control register value to the DSP. */
static int write_control_reg(struct echoaudio *chip, u32 ctl, u32 frq,
char force)
{
__le32 ctl_reg, frq_reg;
if (wait_handshake(chip))
return -EIO;
dev_dbg(chip->card->dev,
"WriteControlReg: Setting 0x%x, 0x%x\n", ctl, frq);
ctl = cpu_to_le32(ctl);
frq = cpu_to_le32(frq);
ctl_reg = cpu_to_le32(ctl);
frq_reg = cpu_to_le32(frq);
if (ctl != chip->comm_page->control_register ||
frq != chip->comm_page->e3g_frq_register || force) {
chip->comm_page->e3g_frq_register = frq;
chip->comm_page->control_register = ctl;
if (ctl_reg != chip->comm_page->control_register ||
frq_reg != chip->comm_page->e3g_frq_register || force) {
chip->comm_page->e3g_frq_register = frq_reg;
chip->comm_page->control_register = ctl_reg;
clear_handshake(chip);
return send_vector(chip, DSP_VC_WRITE_CONTROL_REG);
}
......
......@@ -679,7 +679,7 @@ static int restore_dsp_rettings(struct echoaudio *chip)
/* Gina20/Darla20 only. Should be harmless for other cards. */
chip->comm_page->gd_clock_state = GD_CLOCK_UNDEF;
chip->comm_page->gd_spdif_status = GD_SPDIF_STATUS_UNDEF;
chip->comm_page->handshake = 0xffffffff;
chip->comm_page->handshake = cpu_to_le32(0xffffffff);
/* Restore output busses */
for (i = 0; i < num_busses_out(chip); i++) {
......@@ -989,7 +989,7 @@ static int init_dsp_comm_page(struct echoaudio *chip)
/* Init the comm page */
chip->comm_page->comm_size =
cpu_to_le32(sizeof(struct comm_page));
chip->comm_page->handshake = 0xffffffff;
chip->comm_page->handshake = cpu_to_le32(0xffffffff);
chip->comm_page->midi_out_free_count =
cpu_to_le32(DSP_MIDI_OUT_FIFO_SIZE);
chip->comm_page->sample_rate = cpu_to_le32(44100);
......@@ -1087,7 +1087,7 @@ static int allocate_pipes(struct echoaudio *chip, struct audiopipe *pipe,
/* The counter register is where the DSP writes the 32 bit DMA
position for a pipe. The DSP is constantly updating this value as
it moves data. The DMA counter is in units of bytes, not samples. */
pipe->dma_counter = &chip->comm_page->position[pipe_index];
pipe->dma_counter = (__le32 *)&chip->comm_page->position[pipe_index];
*pipe->dma_counter = 0;
return pipe_index;
}
......
......@@ -627,8 +627,8 @@ sg_entry struct is read by the DSP, so all values must be little-endian. */
#define MAX_SGLIST_ENTRIES 512
struct sg_entry {
u32 addr;
u32 size;
__le32 addr;
__le32 size;
};
......@@ -643,18 +643,18 @@ struct sg_entry {
****************************************************************************/
struct comm_page { /* Base Length*/
u32 comm_size; /* size of this object 0x000 4 */
u32 flags; /* See Appendix A below 0x004 4 */
u32 unused; /* Unused entry 0x008 4 */
u32 sample_rate; /* Card sample rate in Hz 0x00c 4 */
u32 handshake; /* DSP command handshake 0x010 4 */
u32 cmd_start; /* Chs. to start mask 0x014 4 */
u32 cmd_stop; /* Chs. to stop mask 0x018 4 */
u32 cmd_reset; /* Chs. to reset mask 0x01c 4 */
u16 audio_format[DSP_MAXPIPES]; /* Chs. audio format 0x020 32*2 */
__le32 comm_size; /* size of this object 0x000 4 */
__le32 flags; /* See Appendix A below 0x004 4 */
__le32 unused; /* Unused entry 0x008 4 */
__le32 sample_rate; /* Card sample rate in Hz 0x00c 4 */
__le32 handshake; /* DSP command handshake 0x010 4 */
__le32 cmd_start; /* Chs. to start mask 0x014 4 */
__le32 cmd_stop; /* Chs. to stop mask 0x018 4 */
__le32 cmd_reset; /* Chs. to reset mask 0x01c 4 */
__le16 audio_format[DSP_MAXPIPES]; /* Chs. audio format 0x020 32*2 */
struct sg_entry sglist_addr[DSP_MAXPIPES];
/* Chs. Physical sglist addrs 0x060 32*8 */
u32 position[DSP_MAXPIPES];
__le32 position[DSP_MAXPIPES];
/* Positions for ea. ch. 0x160 32*4 */
s8 vu_meter[DSP_MAXPIPES];
/* VU meters 0x1e0 32*1 */
......@@ -666,28 +666,28 @@ struct comm_page { /* Base Length*/
/* Input gain 0x230 16*1 */
s8 monitors[MONITOR_ARRAY_SIZE];
/* Monitor map 0x240 0x180 */
u32 play_coeff[MAX_PLAY_TAPS];
__le32 play_coeff[MAX_PLAY_TAPS];
/* Gina/Darla play filters - obsolete 0x3c0 168*4 */
u32 rec_coeff[MAX_REC_TAPS];
__le32 rec_coeff[MAX_REC_TAPS];
/* Gina/Darla record filters - obsolete 0x660 192*4 */
u16 midi_input[MIDI_IN_BUFFER_SIZE];
__le16 midi_input[MIDI_IN_BUFFER_SIZE];
/* MIDI input data transfer buffer 0x960 256*2 */
u8 gd_clock_state; /* Chg Gina/Darla clock state 0xb60 1 */
u8 gd_spdif_status; /* Chg. Gina/Darla S/PDIF state 0xb61 1 */
u8 gd_resampler_state; /* Should always be 3 0xb62 1 */
u8 filler2; /* 0xb63 1 */
u32 nominal_level_mask; /* -10 level enable mask 0xb64 4 */
u16 input_clock; /* Chg. Input clock state 0xb68 2 */
u16 output_clock; /* Chg. Output clock state 0xb6a 2 */
u32 status_clocks; /* Current Input clock state 0xb6c 4 */
u32 ext_box_status; /* External box status 0xb70 4 */
u32 cmd_add_buffer; /* Pipes to add (obsolete) 0xb74 4 */
u32 midi_out_free_count;
__le32 nominal_level_mask; /* -10 level enable mask 0xb64 4 */
__le16 input_clock; /* Chg. Input clock state 0xb68 2 */
__le16 output_clock; /* Chg. Output clock state 0xb6a 2 */
__le32 status_clocks; /* Current Input clock state 0xb6c 4 */
__le32 ext_box_status; /* External box status 0xb70 4 */
__le32 cmd_add_buffer; /* Pipes to add (obsolete) 0xb74 4 */
__le32 midi_out_free_count;
/* # of bytes free in MIDI output FIFO 0xb78 4 */
u32 unused2; /* Cyclic pipes 0xb7c 4 */
u32 control_register;
__le32 unused2; /* Cyclic pipes 0xb7c 4 */
__le32 control_register;
/* Mona, Gina24, Layla24, 3G ctrl reg 0xb80 4 */
u32 e3g_frq_register; /* 3G frequency register 0xb84 4 */
__le32 e3g_frq_register; /* 3G frequency register 0xb84 4 */
u8 filler[24]; /* filler 0xb88 24*1 */
s8 vmixer[VMIXER_ARRAY_SIZE];
/* Vmixer levels 0xba0 64*1 */
......
......@@ -63,6 +63,8 @@ the control register. write_control_reg sends the new control register
value to the DSP. */
static int write_control_reg(struct echoaudio *chip, u32 value, char force)
{
__le32 reg_value;
/* Handle the digital input auto-mute */
if (chip->digital_in_automute)
value |= GML_DIGITAL_IN_AUTO_MUTE;
......@@ -72,11 +74,11 @@ static int write_control_reg(struct echoaudio *chip, u32 value, char force)
dev_dbg(chip->card->dev, "write_control_reg: 0x%x\n", value);
/* Write the control register */
value = cpu_to_le32(value);
if (value != chip->comm_page->control_register || force) {
reg_value = cpu_to_le32(value);
if (reg_value != chip->comm_page->control_register || force) {
if (wait_handshake(chip))
return -EIO;
chip->comm_page->control_register = value;
chip->comm_page->control_register = reg_value;
clear_handshake(chip);
return send_vector(chip, DSP_VC_WRITE_CONTROL_REG);
}
......
Markdown is supported
0%
or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment