Commit 2aaa1b21 authored by Andy Gross's avatar Andy Gross

Merge branch 'qcs404-topic-revised' into arm64-for-4.21-3

parents 9b08a32b 85bc3096
......@@ -8,3 +8,5 @@ dtb-$(CONFIG_ARCH_QCOM) += msm8994-angler-rev-101.dtb
dtb-$(CONFIG_ARCH_QCOM) += msm8996-mtp.dtb
dtb-$(CONFIG_ARCH_QCOM) += msm8998-mtp.dtb
dtb-$(CONFIG_ARCH_QCOM) += sdm845-mtp.dtb
dtb-$(CONFIG_ARCH_QCOM) += qcs404-evb-1000.dtb
dtb-$(CONFIG_ARCH_QCOM) += qcs404-evb-4000.dtb
// SPDX-License-Identifier: GPL-2.0
// Copyright (c) 2018, Linaro Limited
#include <dt-bindings/spmi/spmi.h>
#include <dt-bindings/input/linux-event-codes.h>
&spmi_bus {
pms405_0: pms405@0 {
compatible = "qcom,spmi-pmic";
reg = <0x0 SPMI_USID>;
#address-cells = <1>;
#size-cells = <0>;
pms405_gpios: gpio@c000 {
compatible = "qcom,pms405-gpio";
reg = <0xc000>;
gpio-controller;
#gpio-cells = <2>;
interrupts = <0 0xc0 0 IRQ_TYPE_NONE>,
<0 0xc1 0 IRQ_TYPE_NONE>,
<0 0xc2 0 IRQ_TYPE_NONE>,
<0 0xc3 0 IRQ_TYPE_NONE>,
<0 0xc4 0 IRQ_TYPE_NONE>,
<0 0xc5 0 IRQ_TYPE_NONE>,
<0 0xc6 0 IRQ_TYPE_NONE>,
<0 0xc7 0 IRQ_TYPE_NONE>,
<0 0xc8 0 IRQ_TYPE_NONE>,
<0 0xc9 0 IRQ_TYPE_NONE>,
<0 0xca 0 IRQ_TYPE_NONE>,
<0 0xcb 0 IRQ_TYPE_NONE>;
};
pon@800 {
compatible = "qcom,pms405-pon";
reg = <0x0800>;
mode-bootloader = <0x2>;
mode-recovery = <0x1>;
pwrkey {
compatible = "qcom,pm8941-pwrkey";
interrupts = <0x0 0x8 0 IRQ_TYPE_EDGE_BOTH>;
debounce = <15625>;
bias-pull-up;
linux,code = <KEY_POWER>;
};
};
rtc@6000 {
compatible = "qcom,pm8941-rtc";
reg = <0x6000>;
reg-names = "rtc", "alarm";
interrupts = <0x0 0x61 0x1 IRQ_TYPE_NONE>;
};
};
};
// SPDX-License-Identifier: GPL-2.0
// Copyright (c) 2018, Linaro Limited
/dts-v1/;
#include "qcs404-evb.dtsi"
/ {
model = "Qualcomm Technologies, Inc. QCS404 EVB 1000";
compatible = "qcom,qcs404-evb";
};
// SPDX-License-Identifier: GPL-2.0
// Copyright (c) 2018, Linaro Limited
/dts-v1/;
#include "qcs404-evb.dtsi"
/ {
model = "Qualcomm Technologies, Inc. QCS404 EVB 4000";
compatible = "qcom,qcs404-evb";
};
// SPDX-License-Identifier: GPL-2.0
// Copyright (c) 2018, Linaro Limited
#include "qcs404.dtsi"
#include "pms405.dtsi"
/ {
aliases {
serial0 = &blsp1_uart2;
};
chosen {
stdout-path = "serial0";
};
vph_pwr: vph-pwr-regulator {
compatible = "regulator-fixed";
regulator-name = "vph_pwr";
regulator-always-on;
regulator-boot-on;
};
};
&remoteproc_adsp {
status = "ok";
};
&remoteproc_cdsp {
status = "ok";
};
&remoteproc_wcss {
status = "ok";
};
&rpm_requests {
pms405-regulators {
compatible = "qcom,rpm-pms405-regulators";
vdd-s1-supply = <&vph_pwr>;
vdd-s2-supply = <&vph_pwr>;
vdd-s3-supply = <&vph_pwr>;
vdd-s4-supply = <&vph_pwr>;
vdd-s5-supply = <&vph_pwr>;
vdd-l1-l2-supply = <&vreg_s5_1p35>;
vdd-l3-l8-supply = <&vreg_s5_1p35>;
vdd-l4-supply = <&vreg_s5_1p35>;
vdd-l5-l6-supply = <&vreg_s4_1p8>;
vdd-l7-supply = <&vph_pwr>;
vdd-l9-supply = <&vreg_s5_1p35>;
vdd-l10-l11-l12-l13-supply = <&vph_pwr>;
vreg_s4_1p8: s4 {
regulator-min-microvolt = <1728000>;
regulator-max-microvolt = <1920000>;
};
vreg_s5_1p35: s5 {
regulator-min-microvolt = <>;
regulator-max-microvolt = <>;
};
vreg_l1_1p3: l1 {
regulator-min-microvolt = <1240000>;
regulator-max-microvolt = <1352000>;
};
vreg_l2_1p275: l2 {
regulator-min-microvolt = <1048000>;
regulator-max-microvolt = <1280000>;
};
vreg_l3_1p05: l3 {
regulator-min-microvolt = <976000>;
regulator-max-microvolt = <1160000>;
};
vreg_l4_1p2: l4 {
regulator-min-microvolt = <1144000>;
regulator-max-microvolt = <1256000>;
};
vreg_l5_1p8: l5 {
regulator-min-microvolt = <1800000>;
regulator-max-microvolt = <1800000>;
};
vreg_l6_1p8: l6 {
regulator-min-microvolt = <1800000>;
regulator-max-microvolt = <1800000>;
regulator-always-on;
};
vreg_l7_1p8: l7 {
regulator-min-microvolt = <1616000>;
regulator-max-microvolt = <3000000>;
};
vreg_l8_1p2: l8 {
regulator-min-microvolt = <1136000>;
regulator-max-microvolt = <1352000>;
};
vreg_l10_3p3: l10 {
regulator-min-microvolt = <2936000>;
regulator-max-microvolt = <3088000>;
};
vreg_l11_sdc2: l11 {
regulator-min-microvolt = <2696000>;
regulator-max-microvolt = <3304000>;
};
vreg_l12_3p3: l12 {
regulator-min-microvolt = <2968000>;
regulator-max-microvolt = <3300000>;
};
vreg_l13_3p3: l13 {
regulator-min-microvolt = <3000000>;
regulator-max-microvolt = <3300000>;
};
};
};
&sdcc1 {
status = "ok";
mmc-ddr-1_8v;
bus-width = <8>;
non-removable;
pinctrl-names = "default", "sleep";
pinctrl-0 = <&sdc1_on>;
pinctrl-1 = <&sdc1_off>;
};
&tlmm {
sdc1_on: sdc1-on {
clk {
pins = "sdc1_clk";
bias-disable;
drive-strength = <16>;
};
cmd {
pins = "sdc1_cmd";
bias-pull-up;
drive-strength = <10>;
};
data {
pins = "sdc1_data";
bias-pull-up;
dreive-strength = <10>;
};
rclk {
pins = "sdc1_rclk";
bias-pull-down;
};
};
sdc1_off: sdc1-off {
clk {
pins = "sdc1_clk";
bias-disable;
drive-strength = <2>;
};
cmd {
pins = "sdc1_cmd";
bias-pull-up;
drive-strength = <2>;
};
data {
pins = "sdc1_data";
bias-pull-up;
dreive-strength = <2>;
};
rclk {
pins = "sdc1_rclk";
bias-pull-down;
};
};
};
This diff is collapsed.
Markdown is supported
0%
or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment