powerpc/fsl-booke: Add T1024 QDS board support

Add support for Freescale T1024/T1023 QorIQ Development System Board.

T1024QDS is a high-performance computing evaluation, development and
test platform for T1024 QorIQ Power Architecture processor.
Signed-off-by: Shengzhou Liu <Shengzhou.Liu@freescale.com>
[scottwood: vendor prefix: s/at24/atmel/ and trimmed detailed
 board description with too-long lines]
Signed-off-by: Scott Wood <scottwood@freescale.com>

arch/powerpc/boot/dts/fsl/t1023si-post.dtsi

@@ -305,26 +305,26 @@ sdhc@114000 {
 /include/ "qoriq-gpio-2.dtsi"
 /include/ "qoriq-gpio-3.dtsi"
 /include/ "qoriq-usb2-mph-0.dtsi"
-		usb0: usb@210000 {
-			compatible = "fsl-usb2-mph-v2.5", "fsl-usb2-mph";
-			fsl,iommu-parent = <&pamu0>;
-			fsl,liodn-reg = <&guts 0x520>; /* USB1LIODNR */
-			phy_type = "utmi";
-			port0;
-		};
+	usb0: usb@210000 {
+		compatible = "fsl-usb2-mph-v2.5", "fsl-usb2-mph";
+		fsl,iommu-parent = <&pamu0>;
+		fsl,liodn-reg = <&guts 0x520>; /* USB1LIODNR */
+		phy_type = "utmi";
+		port0;
+	};
 /include/ "qoriq-usb2-dr-0.dtsi"
-		usb1: usb@211000 {
-			compatible = "fsl-usb2-dr-v2.5", "fsl-usb2-dr";
-			fsl,iommu-parent = <&pamu0>;
-			fsl,liodn-reg = <&guts 0x524>; /* USB2LIODNR */
-			dr_mode = "host";
-			phy_type = "utmi";
-		};
+	usb1: usb@211000 {
+		compatible = "fsl-usb2-dr-v2.5", "fsl-usb2-dr";
+		fsl,iommu-parent = <&pamu0>;
+		fsl,liodn-reg = <&guts 0x524>; /* USB2LIODNR */
+		dr_mode = "host";
+		phy_type = "utmi";
+	};
 /include/ "qoriq-sata2-0.dtsi"
-sata@220000 {
-			fsl,iommu-parent = <&pamu0>;
-			fsl,liodn-reg = <&guts 0x550>; /* SATA1LIODNR */
-};
+	sata@220000 {
+		fsl,iommu-parent = <&pamu0>;
+		fsl,liodn-reg = <&guts 0x550>; /* SATA1LIODNR */
+	};
 
 /include/ "qoriq-sec5.0-0.dtsi"
 };

arch/powerpc/boot/dts/t1024qds.dts

+/*
+ * T1024 QDS Device Tree Source
+ *
+ * Copyright 2014 Freescale Semiconductor Inc.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions are met:
+ *     * Redistributions of source code must retain the above copyright
+ *	 notice, this list of conditions and the following disclaimer.
+ *     * Redistributions in binary form must reproduce the above copyright
+ *	 notice, this list of conditions and the following disclaimer in the
+ *	 documentation and/or other materials provided with the distribution.
+ *     * Neither the name of Freescale Semiconductor nor the
+ *	 names of its contributors may be used to endorse or promote products
+ *	 derived from this software without specific prior written permission.
+ *
+ *
+ * ALTERNATIVELY, this software may be distributed under the terms of the
+ * GNU General Public License ("GPL") as published by the Free Software
+ * Foundation, either version 2 of that License or (at your option) any
+ * later version.
+ *
+ * THIS SOFTWARE IS PROVIDED BY Freescale Semiconductor "AS IS" AND ANY
+ * EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
+ * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+ * DISCLAIMED. IN NO EVENT SHALL Freescale Semiconductor BE LIABLE FOR ANY
+ * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
+ * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
+ * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND
+ * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+ * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
+ * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ */
+
+/include/ "fsl/t102xsi-pre.dtsi"
+
+/ {
+	model = "fsl,T1024QDS";
+	compatible = "fsl,T1024QDS";
+	#address-cells = <2>;
+	#size-cells = <2>;
+	interrupt-parent = <&mpic>;
+
+	ifc: localbus@ffe124000 {
+		reg = <0xf 0xfe124000 0 0x2000>;
+		ranges = <0 0 0xf 0xe8000000 0x08000000
+			  2 0 0xf 0xff800000 0x00010000
+			  3 0 0xf 0xffdf0000 0x00008000>;
+
+		nor@0,0 {
+			#address-cells = <1>;
+			#size-cells = <1>;
+			compatible = "cfi-flash";
+			reg = <0x0 0x0 0x8000000>;
+			bank-width = <2>;
+			device-width = <1>;
+		};
+
+		nand@2,0 {
+			#address-cells = <1>;
+			#size-cells = <1>;
+			compatible = "fsl,ifc-nand";
+			reg = <0x2 0x0 0x10000>;
+		};
+
+		board-control@3,0 {
+			#address-cells = <1>;
+			#size-cells = <1>;
+			compatible = "fsl,tetra-fpga", "fsl,fpga-qixis";
+			reg = <3 0 0x300>;
+			ranges = <0 3 0 0x300>;
+		};
+	};
+
+	memory {
+		device_type = "memory";
+	};
+
+	dcsr: dcsr@f00000000 {
+		ranges = <0x00000000 0xf 0x00000000 0x01072000>;
+	};
+
+	soc: soc@ffe000000 {
+		ranges = <0x00000000 0xf 0xfe000000 0x1000000>;
+		reg = <0xf 0xfe000000 0 0x00001000>;
+		spi@110000 {
+			flash@0 {
+				#address-cells = <1>;
+				#size-cells = <1>;
+				compatible = "micron,n25q128a11";  /* 16MB */
+				reg = <0>;
+				spi-max-frequency = <10000000>;
+			};
+
+			flash@1 {
+				#address-cells = <1>;
+				#size-cells = <1>;
+				compatible = "sst,sst25wf040";  /* 512KB */
+				reg = <1>;
+				spi-max-frequency = <10000000>;
+			};
+
+			flash@2 {
+				#address-cells = <1>;
+				#size-cells = <1>;
+				compatible = "eon,en25s64";   /* 8MB */
+				reg = <2>;
+				spi-max-frequency = <10000000>;
+			};
+
+			slic@2 {
+				compatible = "maxim,ds26522";
+				reg = <2>;
+				spi-max-frequency = <2000000>;
+			};
+
+			slic@3 {
+				compatible = "maxim,ds26522";
+				reg = <3>;
+				spi-max-frequency = <2000000>;
+			};
+		};
+
+		i2c@118000 {
+			pca9547@77 {
+				compatible = "nxp,pca9547";
+				reg = <0x77>;
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				i2c@0 {
+					#address-cells = <1>;
+					#size-cells = <0>;
+					reg = <0x0>;
+
+					eeprom@50 {
+						compatible = "atmel,24c512";
+						reg = <0x50>;
+					};
+
+					eeprom@51 {
+						compatible = "atmel,24c02";
+						reg = <0x51>;
+					};
+
+					eeprom@57 {
+						compatible = "atmel,24c02";
+						reg = <0x57>;
+					};
+				};
+
+				i2c@2 {
+					#address-cells = <1>;
+					#size-cells = <0>;
+					reg = <0x2>;
+
+					ina220@40 {
+						compatible = "ti,ina220";
+						reg = <0x40>;
+						shunt-resistor = <1000>;
+					};
+
+					ina220@41 {
+						compatible = "ti,ina220";
+						reg = <0x41>;
+						shunt-resistor = <1000>;
+					};
+				};
+
+				i2c@3 {
+					#address-cells = <1>;
+					#size-cells = <0>;
+					reg = <0x3>;
+
+					adt7461@4c {
+						/* Thermal Monitor */
+						compatible = "adi,adt7461";
+						reg = <0x4c>;
+					};
+
+					eeprom@55 {
+						compatible = "atmel,24c02";
+						reg = <0x55>;
+					};
+
+					eeprom@56 {
+						compatible = "atmel,24c512";
+						reg = <0x56>;
+					};
+
+					eeprom@57 {
+						compatible = "atmel,24c512";
+						reg = <0x57>;
+					};
+				};
+			};
+			rtc@68 {
+				compatible = "dallas,ds3232";
+				reg = <0x68>;
+				interrupts = <0x5 0x1 0 0>;
+			};
+		};
+	};
+
+	pci0: pcie@ffe240000 {
+		reg = <0xf 0xfe240000 0 0x10000>;
+		ranges = <0x02000000 0 0xe0000000 0xc 0x00000000 0 0x10000000
+			  0x01000000 0 0x00000000 0xf 0xf8000000 0 0x00010000>;
+		pcie@0 {
+			ranges = <0x02000000 0 0xe0000000
+				  0x02000000 0 0xe0000000
+				  0 0x10000000
+
+				  0x01000000 0 0x00000000
+				  0x01000000 0 0x00000000
+				  0 0x00010000>;
+		};
+	};
+
+	pci1: pcie@ffe250000 {
+		reg = <0xf 0xfe250000 0 0x10000>;
+		ranges = <0x02000000 0 0xe0000000 0xc 0x10000000 0 0x10000000
+			  0x01000000 0 0x00000000 0xf 0xf8010000 0 0x00010000>;
+		pcie@0 {
+			ranges = <0x02000000 0 0xe0000000
+				  0x02000000 0 0xe0000000
+				  0 0x10000000
+
+				  0x01000000 0 0x00000000
+				  0x01000000 0 0x00000000
+				  0 0x00010000>;
+		};
+	};
+
+	pci2: pcie@ffe260000 {
+		reg = <0xf 0xfe260000 0 0x10000>;
+		ranges = <0x02000000 0 0xe0000000 0xc 0x20000000 0 0x10000000
+			  0x01000000 0 0x00000000 0xf 0xf8020000 0 0x00010000>;
+		pcie@0 {
+			ranges = <0x02000000 0 0xe0000000
+				  0x02000000 0 0xe0000000
+				  0 0x10000000
+
+				  0x01000000 0 0x00000000
+				  0x01000000 0 0x00000000
+				  0 0x00010000>;
+		};
+	};
+};
+
+/include/ "fsl/t1024si-post.dtsi"

arch/powerpc/platforms/85xx/Kconfig

@@ -282,7 +282,7 @@ config CORENET_GENERIC
 	  For 64bit kernel, the following boards are supported:
 	    T208x QDS/RDB, T4240 QDS/RDB and B4 QDS
 	  The following boards are supported for both 32bit and 64bit kernel:
-	    P5020 DS, P5040 DS and T104xQDS/RDB
+	    P5020 DS, P5040 DS, T102x QDS, T104x QDS/RDB
 
 endif # FSL_SOC_BOOKE
 

arch/powerpc/platforms/85xx/corenet_generic.c

@@ -150,6 +150,7 @@ static const char * const boards[] __initconst = {
 	"fsl,B4860QDS",
 	"fsl,B4420QDS",
 	"fsl,B4220QDS",
+	"fsl,T1024QDS",
 	"fsl,T1040QDS",
 	"fsl,T1042QDS",
 	"fsl,T1040RDB",