arm64: dts: qcom: sc7180: rename labels for DSI nodes

Currently in board files MDSS and DSI nodes stay apart, because labels
for DSI nodes do not have the mdss_ prefix. It was found that grouping
all display-related notes is more useful.

To keep all display-related nodes close in the board files, change DSI
node labels from dsi_* to mdss_dsi_*.
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Reviewed-by: Konrad Dybcio <konrad.dybcio@linaro.org>
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Link: https://lore.kernel.org/r/20230531011623.3808538-8-dmitry.baryshkov@linaro.org

arch/arm64/boot/dts/qcom/sc7180-acer-aspire1.dts

@@ -143,21 +143,6 @@ reg_tp_3p3: touchpad-regulator {
 	};
 };
 
-&dsi0 {
-	vdda-supply = <&vreg_l3c_1p2>;
-	status = "okay";
-};
-
-&dsi0_out {
-	remote-endpoint = <&sn65dsi86_in>;
-	data-lanes = <0 1 2 3>;
-};
-
-&dsi_phy {
-	vdds-supply = <&vreg_l4a_0p8>;
-	status = "okay";
-};
-
 &i2c2 {
 	clock-frequency = <400000>;
 	status = "okay";
@@ -269,7 +254,7 @@ port@0 {
 				reg = <0>;
 
 				sn65dsi86_in: endpoint {
-					remote-endpoint = <&dsi0_out>;
+					remote-endpoint = <&mdss_dsi0_out>;
 				};
 			};
 
@@ -313,6 +298,21 @@ &mdss {
 	status = "okay";
 };
 
+&mdss_dsi0 {
+	vdda-supply = <&vreg_l3c_1p2>;
+	status = "okay";
+};
+
+&mdss_dsi0_out {
+	remote-endpoint = <&sn65dsi86_in>;
+	data-lanes = <0 1 2 3>;
+};
+
+&mdss_dsi0_phy {
+	vdds-supply = <&vreg_l4a_0p8>;
+	status = "okay";
+};
+
 &pm6150_adc {
 	thermistor@4e {
 		reg = <ADC5_AMUX_THM2_100K_PU>;

arch/arm64/boot/dts/qcom/sc7180-idp.dts

@@ -295,7 +295,11 @@ vreg_bob: bob {
 	};
 };
 
-&dsi0 {
+&mdss {
+	status = "okay";
+};
+
+&mdss_dsi0 {
 	status = "okay";
 
 	vdda-supply = <&vreg_l3c_1p2>;
@@ -314,7 +318,7 @@ panel@0 {
 
 		port {
 			panel0_in: endpoint {
-				remote-endpoint = <&dsi0_out>;
+				remote-endpoint = <&mdss_dsi0_out>;
 			};
 		};
 	};
@@ -329,15 +333,11 @@ endpoint {
 	};
 };
 
-&dsi_phy {
+&mdss_dsi0_phy {
 	status = "okay";
 	vdds-supply = <&vreg_l4a_0p8>;
 };
 
-&mdss {
-	status = "okay";
-};
-
 &qfprom {
 	vcc-supply = <&vreg_l11a_1p8>;
 };

arch/arm64/boot/dts/qcom/sc7180-trogdor-parade-ps8640.dtsi

@@ -46,10 +46,6 @@ &pp3300_dx_edp {
 
 /* ADDITIONS TO NODES DEFINED IN PARENT DEVICE TREE FILES */
 
-&dsi0_out {
-	remote-endpoint = <&ps8640_in>;
-};
-
 edp_brij_i2c: &i2c2 {
 	status = "okay";
 	clock-frequency = <400000>;
@@ -74,7 +70,7 @@ ports {
 			port@0 {
 				reg = <0>;
 				ps8640_in: endpoint {
-					remote-endpoint = <&dsi0_out>;
+					remote-endpoint = <&mdss_dsi0_out>;
 				};
 			};
 
@@ -102,6 +98,10 @@ panel_in_edp: endpoint {
 	};
 };
 
+&mdss_dsi0_out {
+	remote-endpoint = <&ps8640_in>;
+};
+
 &tlmm {
 	edp_brij_ps8640_rst: edp-brij-ps8640-rst-state {
 		pins = "gpio11";

arch/arm64/boot/dts/qcom/sc7180-trogdor-quackingstick-r0.dts

@@ -15,7 +15,7 @@ / {
 	compatible = "google,quackingstick-sku1537", "qcom,sc7180";
 };
 
-&dsi_phy {
+&mdss_dsi0_phy {
 	qcom,phy-rescode-offset-top = /bits/ 8 <(-13) (-13) (-13) (-13) (-13)>;
 	qcom,phy-rescode-offset-bot = /bits/ 8 <(-13) (-13) (-13) (-13) (-13)>;
 	qcom,phy-drive-ldo-level = <375>;

arch/arm64/boot/dts/qcom/sc7180-trogdor-quackingstick.dtsi

@@ -52,7 +52,31 @@ keyboard-controller {
 	};
 };
 
-&dsi0 {
+&gpio_keys {
+	status = "okay";
+};
+
+&i2c4 {
+	status = "okay";
+	clock-frequency = <400000>;
+
+	ap_ts: touchscreen@10 {
+		compatible = "hid-over-i2c";
+		reg = <0x10>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&ts_int_l>, <&ts_reset_l>;
+
+		interrupt-parent = <&tlmm>;
+		interrupts = <9 IRQ_TYPE_LEVEL_LOW>;
+
+		post-power-on-delay-ms = <20>;
+		hid-descr-addr = <0x0001>;
+
+		vdd-supply = <&pp3300_ts>;
+	};
+};
+
+&mdss_dsi0 {
 	panel: panel@0 {
 		/* Compatible will be filled in per-board */
 		reg = <0>;
@@ -67,7 +91,7 @@ panel: panel@0 {
 
 		port {
 			panel_in: endpoint {
-				remote-endpoint = <&dsi0_out>;
+				remote-endpoint = <&mdss_dsi0_out>;
 			};
 		};
 	};
@@ -82,30 +106,6 @@ endpoint {
 	};
 };
 
-&gpio_keys {
-	status = "okay";
-};
-
-&i2c4 {
-	status = "okay";
-	clock-frequency = <400000>;
-
-	ap_ts: touchscreen@10 {
-		compatible = "hid-over-i2c";
-		reg = <0x10>;
-		pinctrl-names = "default";
-		pinctrl-0 = <&ts_int_l>, <&ts_reset_l>;
-
-		interrupt-parent = <&tlmm>;
-		interrupts = <9 IRQ_TYPE_LEVEL_LOW>;
-
-		post-power-on-delay-ms = <20>;
-		hid-descr-addr = <0x0001>;
-
-		vdd-supply = <&pp3300_ts>;
-	};
-};
-
 &sdhc_2 {
 	status = "okay";
 };

arch/arm64/boot/dts/qcom/sc7180-trogdor-ti-sn65dsi86.dtsi

@@ -27,10 +27,6 @@ &pp3300_dx_edp {
 
 /* ADDITIONS TO NODES DEFINED IN PARENT DEVICE TREE FILES */
 
-&dsi0_out {
-	remote-endpoint = <&sn65dsi86_in>;
-};
-
 edp_brij_i2c: &i2c2 {
 	status = "okay";
 	clock-frequency = <400000>;
@@ -65,7 +61,7 @@ ports {
 			port@0 {
 				reg = <0>;
 				sn65dsi86_in: endpoint {
-					remote-endpoint = <&dsi0_out>;
+					remote-endpoint = <&mdss_dsi0_out>;
 				};
 			};
 
@@ -95,6 +91,10 @@ panel_in_edp: endpoint {
 	};
 };
 
+&mdss_dsi0_out {
+	remote-endpoint = <&sn65dsi86_in>;
+};
+
 &tlmm {
 	edp_brij_irq: edp-brij-irq-state {
 		pins = "gpio11";

arch/arm64/boot/dts/qcom/sc7180-trogdor-wormdingler-rev1-boe.dts

@@ -17,7 +17,7 @@ / {
 	compatible = "google,wormdingler-sku1024", "qcom,sc7180";
 };
 
-&dsi_phy {
+&mdss_dsi0_phy {
 	qcom,phy-rescode-offset-top = /bits/ 8 <31 31 31 31 (-32)>;
 	qcom,phy-rescode-offset-bot = /bits/ 8 <31 31 31 31 (-32)>;
 	qcom,phy-drive-ldo-level = <450>;

arch/arm64/boot/dts/qcom/sc7180-trogdor-wormdingler.dtsi

@@ -110,7 +110,28 @@ keyboard-controller {
 	};
 };
 
-&dsi0 {
+&i2c4 {
+	status = "okay";
+	clock-frequency = <400000>;
+
+	ap_ts: touchscreen@1 {
+		compatible = "hid-over-i2c";
+		reg = <0x01>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&ts_int_l>;
+
+		interrupt-parent = <&tlmm>;
+		interrupts = <9 IRQ_TYPE_EDGE_FALLING>;
+
+		post-power-on-delay-ms = <70>;
+		hid-descr-addr = <0x0001>;
+
+		vdd-supply = <&pp3300_ts>;
+		vddl-supply = <&pp1800_ts>;
+	};
+};
+
+&mdss_dsi0 {
 
 	panel: panel@0 {
 		reg = <0>;
@@ -126,7 +147,7 @@ panel: panel@0 {
 
 		port {
 			panel_in: endpoint {
-				remote-endpoint = <&dsi0_out>;
+				remote-endpoint = <&mdss_dsi0_out>;
 			};
 		};
 	};
@@ -141,27 +162,6 @@ endpoint {
 	};
 };
 
-&i2c4 {
-	status = "okay";
-	clock-frequency = <400000>;
-
-	ap_ts: touchscreen@1 {
-		compatible = "hid-over-i2c";
-		reg = <0x01>;
-		pinctrl-names = "default";
-		pinctrl-0 = <&ts_int_l>;
-
-		interrupt-parent = <&tlmm>;
-		interrupts = <9 IRQ_TYPE_EDGE_FALLING>;
-
-		post-power-on-delay-ms = <70>;
-		hid-descr-addr = <0x0001>;
-
-		vdd-supply = <&pp3300_ts>;
-		vddl-supply = <&pp1800_ts>;
-	};
-};
-
 &pm6150_adc {
 	skin-temp-thermistor@4d {
 		reg = <ADC5_AMUX_THM1_100K_PU>;

arch/arm64/boot/dts/qcom/sc7180-trogdor.dtsi

@@ -705,20 +705,6 @@ &camcc {
 	status = "disabled";
 };
 
-&dsi0 {
-	status = "okay";
-	vdda-supply = <&vdda_mipi_dsi0_1p2>;
-};
-
-&dsi0_out {
-	data-lanes = <0 1 2 3>;
-};
-
-&dsi_phy {
-	status = "okay";
-	vdds-supply = <&vdda_mipi_dsi0_pll>;
-};
-
 ap_sar_sensor_i2c: &i2c5 {
 	clock-frequency = <400000>;
 
@@ -836,6 +822,20 @@ &mdss_dp_out {
 	link-frequencies = /bits/ 64 <1620000000 2700000000 5400000000>;
 };
 
+&mdss_dsi0 {
+	status = "okay";
+	vdda-supply = <&vdda_mipi_dsi0_1p2>;
+};
+
+&mdss_dsi0_out {
+	data-lanes = <0 1 2 3>;
+};
+
+&mdss_dsi0_phy {
+	status = "okay";
+	vdds-supply = <&vdda_mipi_dsi0_pll>;
+};
+
 &pm6150_adc {
 	charger-thermistor@4f {
 		reg = <ADC5_AMUX_THM3_100K_PU>;

arch/arm64/boot/dts/qcom/sc7180.dtsi

@@ -2996,7 +2996,7 @@ ports {
 					port@0 {
 						reg = <0>;
 						dpu_intf1_out: endpoint {
-							remote-endpoint = <&dsi0_in>;
+							remote-endpoint = <&mdss_dsi0_in>;
 						};
 					};
 
@@ -3033,7 +3033,7 @@ opp-460000000 {
 				};
 			};
 
-			dsi0: dsi@ae94000 {
+			mdss_dsi0: dsi@ae94000 {
 				compatible = "qcom,sc7180-dsi-ctrl",
 					     "qcom,mdss-dsi-ctrl";
 				reg = <0 0x0ae94000 0 0x400>;
@@ -3056,12 +3056,12 @@ dsi0: dsi@ae94000 {
 					      "bus";
 
 				assigned-clocks = <&dispcc DISP_CC_MDSS_BYTE0_CLK_SRC>, <&dispcc DISP_CC_MDSS_PCLK0_CLK_SRC>;
-				assigned-clock-parents = <&dsi_phy 0>, <&dsi_phy 1>;
+				assigned-clock-parents = <&mdss_dsi0_phy 0>, <&mdss_dsi0_phy 1>;
 
 				operating-points-v2 = <&dsi_opp_table>;
 				power-domains = <&rpmhpd SC7180_CX>;
 
-				phys = <&dsi_phy>;
+				phys = <&mdss_dsi0_phy>;
 
 				#address-cells = <1>;
 				#size-cells = <0>;
@@ -3074,14 +3074,14 @@ ports {
 
 					port@0 {
 						reg = <0>;
-						dsi0_in: endpoint {
+						mdss_dsi0_in: endpoint {
 							remote-endpoint = <&dpu_intf1_out>;
 						};
 					};
 
 					port@1 {
 						reg = <1>;
-						dsi0_out: endpoint {
+						mdss_dsi0_out: endpoint {
 						};
 					};
 				};
@@ -3106,13 +3106,13 @@ opp-358000000 {
 				};
 			};
 
-			dsi_phy: phy@ae94400 {
+			mdss_dsi0_phy: phy@ae94400 {
 				compatible = "qcom,dsi-phy-10nm";
 				reg = <0 0x0ae94400 0 0x200>,
 				      <0 0x0ae94600 0 0x280>,
 				      <0 0x0ae94a00 0 0x1e0>;
-				reg-names = "dsi_phy",
-					    "dsi_phy_lane",
+				reg-names = "dsi0_phy",
+					    "dsi0_phy_lane",
 					    "dsi_pll";
 
 				#clock-cells = <1>;
@@ -3203,8 +3203,8 @@ dispcc: clock-controller@af00000 {
 			reg = <0 0x0af00000 0 0x200000>;
 			clocks = <&rpmhcc RPMH_CXO_CLK>,
 				 <&gcc GCC_DISP_GPLL0_CLK_SRC>,
-				 <&dsi_phy 0>,
-				 <&dsi_phy 1>,
+				 <&mdss_dsi0_phy 0>,
+				 <&mdss_dsi0_phy 1>,
 				 <&dp_phy 0>,
 				 <&dp_phy 1>;
 			clock-names = "bi_tcxo",