Commit 2bcdb3f2 authored by Lars-Peter Clausen's avatar Lars-Peter Clausen Committed by Jonathan Cameron

staging:iio:adis16220: Remove adis16220 driver

The ADIS16220 part has been obsoleted, which makes it hard to get the
hardware to even test the driver. Considering this there is no expectation
that the driver will be cleaned up and be able to move out of staging, so
remove the driver.
Signed-off-by: default avatarLars-Peter Clausen <lars@metafoo.de>
Signed-off-by: default avatarJonathan Cameron <jic23@kernel.org>
parent 88ae3aed
......@@ -39,17 +39,6 @@ config ADIS16209
To compile this driver as a module, say M here: the module will be
called adis16209.
config ADIS16220
tristate "Analog Devices ADIS16220 Programmable Digital Vibration Sensor"
depends on SPI
select IIO_ADIS_LIB
help
Say Y here to build support for Analog Devices adis16220 programmable
digital vibration sensor.
To compile this driver as a module, say M here: the module will be
called adis16220.
config ADIS16240
tristate "Analog Devices ADIS16240 Programmable Impact Sensor and Recorder"
depends on SPI
......
......@@ -11,9 +11,6 @@ obj-$(CONFIG_ADIS16203) += adis16203.o
adis16209-y := adis16209_core.o
obj-$(CONFIG_ADIS16209) += adis16209.o
adis16220-y := adis16220_core.o
obj-$(CONFIG_ADIS16220) += adis16220.o
adis16240-y := adis16240_core.o
obj-$(CONFIG_ADIS16240) += adis16240.o
......
#ifndef SPI_ADIS16220_H_
#define SPI_ADIS16220_H_
#include <linux/iio/imu/adis.h>
#define ADIS16220_STARTUP_DELAY 220 /* ms */
/* Flash memory write count */
#define ADIS16220_FLASH_CNT 0x00
/* Control, acceleration offset adjustment control */
#define ADIS16220_ACCL_NULL 0x02
/* Control, AIN1 offset adjustment control */
#define ADIS16220_AIN1_NULL 0x04
/* Control, AIN2 offset adjustment control */
#define ADIS16220_AIN2_NULL 0x06
/* Output, power supply during capture */
#define ADIS16220_CAPT_SUPPLY 0x0A
/* Output, temperature during capture */
#define ADIS16220_CAPT_TEMP 0x0C
/* Output, peak acceleration during capture */
#define ADIS16220_CAPT_PEAKA 0x0E
/* Output, peak AIN1 level during capture */
#define ADIS16220_CAPT_PEAK1 0x10
/* Output, peak AIN2 level during capture */
#define ADIS16220_CAPT_PEAK2 0x12
/* Output, capture buffer for acceleration */
#define ADIS16220_CAPT_BUFA 0x14
/* Output, capture buffer for AIN1 */
#define ADIS16220_CAPT_BUF1 0x16
/* Output, capture buffer for AIN2 */
#define ADIS16220_CAPT_BUF2 0x18
/* Control, capture buffer address pointer */
#define ADIS16220_CAPT_PNTR 0x1A
/* Control, capture control register */
#define ADIS16220_CAPT_CTRL 0x1C
/* Control, capture period (automatic mode) */
#define ADIS16220_CAPT_PRD 0x1E
/* Control, Alarm A, acceleration peak threshold */
#define ADIS16220_ALM_MAGA 0x20
/* Control, Alarm 1, AIN1 peak threshold */
#define ADIS16220_ALM_MAG1 0x22
/* Control, Alarm 2, AIN2 peak threshold */
#define ADIS16220_ALM_MAG2 0x24
/* Control, Alarm S, peak threshold */
#define ADIS16220_ALM_MAGS 0x26
/* Control, alarm configuration register */
#define ADIS16220_ALM_CTRL 0x28
/* Control, general I/O configuration */
#define ADIS16220_GPIO_CTRL 0x32
/* Control, self-test control, AIN configuration */
#define ADIS16220_MSC_CTRL 0x34
/* Control, digital I/O configuration */
#define ADIS16220_DIO_CTRL 0x36
/* Control, filter configuration */
#define ADIS16220_AVG_CNT 0x38
/* Status, system status */
#define ADIS16220_DIAG_STAT 0x3C
/* Control, system commands */
#define ADIS16220_GLOB_CMD 0x3E
/* Status, self-test response */
#define ADIS16220_ST_DELTA 0x40
/* Lot Identification Code 1 */
#define ADIS16220_LOT_ID1 0x52
/* Lot Identification Code 2 */
#define ADIS16220_LOT_ID2 0x54
/* Product identifier; convert to decimal = 16220 */
#define ADIS16220_PROD_ID 0x56
/* Serial number */
#define ADIS16220_SERIAL_NUM 0x58
#define ADIS16220_CAPTURE_SIZE 2048
/* MSC_CTRL */
#define ADIS16220_MSC_CTRL_SELF_TEST_EN BIT(8)
#define ADIS16220_MSC_CTRL_POWER_SUP_COM_AIN1 BIT(1)
#define ADIS16220_MSC_CTRL_POWER_SUP_COM_AIN2 BIT(0)
/* DIO_CTRL */
#define ADIS16220_MSC_CTRL_DIO2_BUSY_IND (BIT(5) | BIT(4))
#define ADIS16220_MSC_CTRL_DIO1_BUSY_IND (BIT(3) | BIT(2))
#define ADIS16220_MSC_CTRL_DIO2_ACT_HIGH BIT(1)
#define ADIS16220_MSC_CTRL_DIO1_ACT_HIGH BIT(0)
/* DIAG_STAT */
/* AIN2 sample > ALM_MAG2 */
#define ADIS16220_DIAG_STAT_ALM_MAG2 BIT(14)
/* AIN1 sample > ALM_MAG1 */
#define ADIS16220_DIAG_STAT_ALM_MAG1 BIT(13)
/* Acceleration sample > ALM_MAGA */
#define ADIS16220_DIAG_STAT_ALM_MAGA BIT(12)
/* Error condition programmed into ALM_MAGS[11:0] and ALM_CTRL[5:4] is true */
#define ADIS16220_DIAG_STAT_ALM_MAGS BIT(11)
/* |Peak value in AIN2 data capture| > ALM_MAG2 */
#define ADIS16220_DIAG_STAT_PEAK_AIN2 BIT(10)
/* |Peak value in AIN1 data capture| > ALM_MAG1 */
#define ADIS16220_DIAG_STAT_PEAK_AIN1 BIT(9)
/* |Peak value in acceleration data capture| > ALM_MAGA */
#define ADIS16220_DIAG_STAT_PEAK_ACCEL BIT(8)
/* Data ready, capture complete */
#define ADIS16220_DIAG_STAT_DATA_RDY BIT(7)
#define ADIS16220_DIAG_STAT_FLASH_CHK BIT(6)
#define ADIS16220_DIAG_STAT_SELF_TEST BIT(5)
/* Capture period violation/interruption */
#define ADIS16220_DIAG_STAT_VIOLATION_BIT 4
/* SPI communications failure */
#define ADIS16220_DIAG_STAT_SPI_FAIL_BIT 3
/* Flash update failure */
#define ADIS16220_DIAG_STAT_FLASH_UPT_BIT 2
/* Power supply above 3.625 V */
#define ADIS16220_DIAG_STAT_POWER_HIGH_BIT 1
/* Power supply below 3.15 V */
#define ADIS16220_DIAG_STAT_POWER_LOW_BIT 0
/* GLOB_CMD */
#define ADIS16220_GLOB_CMD_SW_RESET BIT(7)
#define ADIS16220_GLOB_CMD_SELF_TEST BIT(2)
#define ADIS16220_GLOB_CMD_PWR_DOWN BIT(1)
#define ADIS16220_MAX_TX 2048
#define ADIS16220_MAX_RX 2048
#define ADIS16220_SPI_BURST (u32)(1000 * 1000)
#define ADIS16220_SPI_FAST (u32)(2000 * 1000)
/**
* struct adis16220_state - device instance specific data
* @adis: adis device
* @tx: transmit buffer
* @rx: receive buffer
* @buf_lock: mutex to protect tx and rx
**/
struct adis16220_state {
struct adis adis;
struct mutex buf_lock;
u8 tx[ADIS16220_MAX_TX] ____cacheline_aligned;
u8 rx[ADIS16220_MAX_RX];
};
#endif /* SPI_ADIS16220_H_ */
This diff is collapsed.
Markdown is supported
0%
or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment