ALSA: usb-audio: Split endpoint setups for hw_params and prepare (take#2)
This is a second attempt to fix the bug appearing on Android with the recent kernel; the first try was ff878b40 and reverted at commit 79764ec7. The details taken from the v1 patch: One of the former changes for the endpoint management was the more consistent setup of endpoints at hw_params. snd_usb_endpoint_configure() is a single function that does the full setup, and it's called from both PCM hw_params and prepare callbacks. Although the EP setup at the prepare phase is usually skipped (by checking need_setup flag), it may be still effective in some cases like suspend/resume that requires the interface setup again. As it's a full and single setup, the invocation of snd_usb_endpoint_configure() includes not only the USB interface setup but also the buffer release and allocation. OTOH, doing the buffer release and re-allocation at PCM prepare phase is rather superfluous, and better to be done only in the hw_params phase. For those optimizations, this patch splits the endpoint setup to two phases: snd_usb_endpoint_set_params() and snd_usb_endpoint_prepare(), to be called from hw_params and from prepare, respectively. Note that this patch changes the driver operation slightly, effectively moving the USB interface setup again to PCM prepare stage instead of hw_params stage, while the buffer allocation and such initializations are still done at hw_params stage. And, the change of the USB interface setup timing (moving to prepare) gave an interesting "fix", too: it was reported that the recent kernels caused silent output at the beginning on playbacks on some devices on Android, and this change casually fixed the regression. It seems that those devices are picky about the sample rate change (or the interface change?), and don't follow the too immediate rate changes. Meanwhile, Android operates the PCM in the following order: - open, then hw_params with the possibly highest sample rate - close without prepare - re-open, hw_params with the normal sample rate - prepare, and start streaming This procedure ended up the hw_params twice with different rates, and because the recent kernel did set up the sample rate twice one and after, it screwed up the device. OTOH, the earlier kernels didn't set up the USB interface at hw_params, hence this problem didn't appear. Now, with this patch, the USB interface setup is again back to the prepare phase, and it works around the problem automagically. Although we should address the sample rate problem in a more solid way in future, let's keep things working as before for now. *** What's new in the take#2 patch: - The regression caused by the v1 patch (bko#216500) was due to the missing check of need_setup flag at hw_params. Now the check is added, and the snd_usb_endpoint_set_params() call is skipped when the running EP is re-opened. - There was another bug in v1 where the clock reference rate wasn't updated at hw_params phase, which may lead to a lack of the proper hw constraints when an application doesn't issue the prepare but only the hw_params call. This patch fixes it as well by tracking the clock rate change in the prepare callback with a new flag "need_update" for the clock reference object, just like others. - The configure_endpoints() are simplified and folded back into snd_usb_pcm_prepare(). Fixes: bf6313a0 ("ALSA: usb-audio: Refactor endpoint management") Fixes: ff878b40 ("ALSA: usb-audio: Split endpoint setups for hw_params and prepare") Reported-by:chihhao chen <chihhao.chen@mediatek.com> Link: https://lore.kernel.org/r/87e6d6ae69d68dc588ac9acc8c0f24d6188375c3.camel@mediatek.com Link: https://lore.kernel.org/r/20220901124136.4984-1-tiwai@suse.de Link: https://bugzilla.kernel.org/show_bug.cgi?id=216500 Link: https://lore.kernel.org/r/20220920181106.4894-1-tiwai@suse.deSigned-off-by:
Takashi Iwai <tiwai@suse.de>
Showing
Please register or sign in to comment