Commit 2be8481a authored by Peng Ma's avatar Peng Ma Committed by Jens Axboe

ahci: qoriq: add lx2160 platforms support

Lx2160a is a new introduced soc which supports ATA3.0
Signed-off-by: default avatarPeng Ma <peng.ma@nxp.com>
Signed-off-by: default avatarJens Axboe <axboe@kernel.dk>
parent 15ade5d2
......@@ -58,6 +58,7 @@ enum ahci_qoriq_type {
AHCI_LS1046A,
AHCI_LS1088A,
AHCI_LS2088A,
AHCI_LX2160A,
};
struct ahci_qoriq_priv {
......@@ -67,6 +68,8 @@ struct ahci_qoriq_priv {
bool is_dmacoherent;
};
static bool ecc_initialized;
static const struct of_device_id ahci_qoriq_of_match[] = {
{ .compatible = "fsl,ls1021a-ahci", .data = (void *)AHCI_LS1021A},
{ .compatible = "fsl,ls1043a-ahci", .data = (void *)AHCI_LS1043A},
......@@ -74,6 +77,7 @@ static const struct of_device_id ahci_qoriq_of_match[] = {
{ .compatible = "fsl,ls1046a-ahci", .data = (void *)AHCI_LS1046A},
{ .compatible = "fsl,ls1088a-ahci", .data = (void *)AHCI_LS1088A},
{ .compatible = "fsl,ls2088a-ahci", .data = (void *)AHCI_LS2088A},
{ .compatible = "fsl,lx2160a-ahci", .data = (void *)AHCI_LX2160A},
{},
};
MODULE_DEVICE_TABLE(of, ahci_qoriq_of_match);
......@@ -165,9 +169,10 @@ static int ahci_qoriq_phy_init(struct ahci_host_priv *hpriv)
switch (qpriv->type) {
case AHCI_LS1021A:
if (!qpriv->ecc_addr)
if (!(qpriv->ecc_addr || ecc_initialized))
return -EINVAL;
writel(SATA_ECC_DISABLE, qpriv->ecc_addr);
else if (qpriv->ecc_addr && !ecc_initialized)
writel(SATA_ECC_DISABLE, qpriv->ecc_addr);
writel(AHCI_PORT_PHY_1_CFG, reg_base + PORT_PHY1);
writel(LS1021A_PORT_PHY2, reg_base + PORT_PHY2);
writel(LS1021A_PORT_PHY3, reg_base + PORT_PHY3);
......@@ -180,10 +185,12 @@ static int ahci_qoriq_phy_init(struct ahci_host_priv *hpriv)
break;
case AHCI_LS1043A:
if (!qpriv->ecc_addr)
if (!(qpriv->ecc_addr || ecc_initialized))
return -EINVAL;
writel(readl(qpriv->ecc_addr) | ECC_DIS_ARMV8_CH2,
qpriv->ecc_addr);
else if (qpriv->ecc_addr && !ecc_initialized)
writel(readl(qpriv->ecc_addr) |
ECC_DIS_ARMV8_CH2,
qpriv->ecc_addr);
writel(AHCI_PORT_PHY_1_CFG, reg_base + PORT_PHY1);
writel(AHCI_PORT_PHY2_CFG, reg_base + PORT_PHY2);
writel(AHCI_PORT_PHY3_CFG, reg_base + PORT_PHY3);
......@@ -202,10 +209,12 @@ static int ahci_qoriq_phy_init(struct ahci_host_priv *hpriv)
break;
case AHCI_LS1046A:
if (!qpriv->ecc_addr)
if (!(qpriv->ecc_addr || ecc_initialized))
return -EINVAL;
writel(readl(qpriv->ecc_addr) | ECC_DIS_ARMV8_CH2,
qpriv->ecc_addr);
else if (qpriv->ecc_addr && !ecc_initialized)
writel(readl(qpriv->ecc_addr) |
ECC_DIS_ARMV8_CH2,
qpriv->ecc_addr);
writel(AHCI_PORT_PHY_1_CFG, reg_base + PORT_PHY1);
writel(AHCI_PORT_PHY2_CFG, reg_base + PORT_PHY2);
writel(AHCI_PORT_PHY3_CFG, reg_base + PORT_PHY3);
......@@ -215,10 +224,13 @@ static int ahci_qoriq_phy_init(struct ahci_host_priv *hpriv)
break;
case AHCI_LS1088A:
if (!qpriv->ecc_addr)
case AHCI_LX2160A:
if (!(qpriv->ecc_addr || ecc_initialized))
return -EINVAL;
writel(readl(qpriv->ecc_addr) | ECC_DIS_LS1088A,
qpriv->ecc_addr);
else if (qpriv->ecc_addr && !ecc_initialized)
writel(readl(qpriv->ecc_addr) |
ECC_DIS_LS1088A,
qpriv->ecc_addr);
writel(AHCI_PORT_PHY_1_CFG, reg_base + PORT_PHY1);
writel(AHCI_PORT_PHY2_CFG, reg_base + PORT_PHY2);
writel(AHCI_PORT_PHY3_CFG, reg_base + PORT_PHY3);
......@@ -237,6 +249,7 @@ static int ahci_qoriq_phy_init(struct ahci_host_priv *hpriv)
break;
}
ecc_initialized = true;
return 0;
}
......@@ -264,13 +277,18 @@ static int ahci_qoriq_probe(struct platform_device *pdev)
qoriq_priv->type = (enum ahci_qoriq_type)of_id->data;
res = platform_get_resource_byname(pdev, IORESOURCE_MEM,
"sata-ecc");
if (res) {
qoriq_priv->ecc_addr = devm_ioremap_resource(dev, res);
if (IS_ERR(qoriq_priv->ecc_addr))
return PTR_ERR(qoriq_priv->ecc_addr);
if (unlikely(!ecc_initialized)) {
res = platform_get_resource_byname(pdev,
IORESOURCE_MEM,
"sata-ecc");
if (res) {
qoriq_priv->ecc_addr =
devm_ioremap_resource(dev, res);
if (IS_ERR(qoriq_priv->ecc_addr))
return PTR_ERR(qoriq_priv->ecc_addr);
}
}
qoriq_priv->is_dmacoherent = of_dma_is_coherent(np);
rc = ahci_platform_enable_resources(hpriv);
......
Markdown is supported
0%
or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment