media: i2c: ov9282: Add selection API calls for cropping info

As required by libcamera, add the relevant cropping targets
to report which portion of the sensor is being read out in
any mode.
Signed-off-by: Dave Stevenson <dave.stevenson@raspberrypi.com>
Reviewed-by: Jacopo Mondi <jacopo@jmondi.org>
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>

drivers/media/i2c/ov9282.c

@@ -66,6 +66,17 @@
 #define OV9282_PIXEL_RATE	(OV9282_LINK_FREQ * 2 * \
 				 OV9282_NUM_DATA_LANES / 10)
 
+/*
+ * OV9282 native and active pixel array size.
+ * 8 dummy rows/columns on each edge of a 1280x800 active array
+ */
+#define OV9282_NATIVE_WIDTH		1296U
+#define OV9282_NATIVE_HEIGHT		816U
+#define OV9282_PIXEL_ARRAY_LEFT		8U
+#define OV9282_PIXEL_ARRAY_TOP		8U
+#define OV9282_PIXEL_ARRAY_WIDTH	1280U
+#define OV9282_PIXEL_ARRAY_HEIGHT	800U
+
 #define OV9282_REG_MIN		0x00
 #define OV9282_REG_MAX		0xfffff
 
@@ -109,6 +120,7 @@ struct ov9282_mode {
 	u32 vblank_min;
 	u32 vblank_max;
 	u32 link_freq_idx;
+	struct v4l2_rect crop;
 	struct ov9282_reg_list reg_list;
 };
 
@@ -280,6 +292,16 @@ static const struct ov9282_mode supported_modes[] = {
 		.vblank_min = 41,
 		.vblank_max = 51540,
 		.link_freq_idx = 0,
+		.crop = {
+			/*
+			 * Note that this mode takes the top 720 lines from the
+			 * 800 of the sensor. It does not take a middle crop.
+			 */
+			.left = OV9282_PIXEL_ARRAY_LEFT,
+			.top = OV9282_PIXEL_ARRAY_TOP,
+			.width = 1280,
+			.height = 720
+		},
 		.reg_list = {
 			.num_of_regs = ARRAY_SIZE(mode_1280x720_regs),
 			.regs = mode_1280x720_regs,
@@ -720,6 +742,58 @@ static int ov9282_init_pad_cfg(struct v4l2_subdev *sd,
 	return ov9282_set_pad_format(sd, sd_state, &fmt);
 }
 
+static const struct v4l2_rect *
+__ov9282_get_pad_crop(struct ov9282 *ov9282,
+		      struct v4l2_subdev_state *sd_state,
+		      unsigned int pad, enum v4l2_subdev_format_whence which)
+{
+	switch (which) {
+	case V4L2_SUBDEV_FORMAT_TRY:
+		return v4l2_subdev_get_try_crop(&ov9282->sd, sd_state, pad);
+	case V4L2_SUBDEV_FORMAT_ACTIVE:
+		return &ov9282->cur_mode->crop;
+	}
+
+	return NULL;
+}
+
+static int ov9282_get_selection(struct v4l2_subdev *sd,
+				struct v4l2_subdev_state *sd_state,
+				struct v4l2_subdev_selection *sel)
+{
+	switch (sel->target) {
+	case V4L2_SEL_TGT_CROP: {
+		struct ov9282 *ov9282 = to_ov9282(sd);
+
+		mutex_lock(&ov9282->mutex);
+		sel->r = *__ov9282_get_pad_crop(ov9282, sd_state, sel->pad,
+						sel->which);
+		mutex_unlock(&ov9282->mutex);
+
+		return 0;
+	}
+
+	case V4L2_SEL_TGT_NATIVE_SIZE:
+		sel->r.top = 0;
+		sel->r.left = 0;
+		sel->r.width = OV9282_NATIVE_WIDTH;
+		sel->r.height = OV9282_NATIVE_HEIGHT;
+
+		return 0;
+
+	case V4L2_SEL_TGT_CROP_DEFAULT:
+	case V4L2_SEL_TGT_CROP_BOUNDS:
+		sel->r.top = OV9282_PIXEL_ARRAY_TOP;
+		sel->r.left = OV9282_PIXEL_ARRAY_LEFT;
+		sel->r.width = OV9282_PIXEL_ARRAY_WIDTH;
+		sel->r.height = OV9282_PIXEL_ARRAY_HEIGHT;
+
+		return 0;
+	}
+
+	return -EINVAL;
+}
+
 /**
  * ov9282_start_streaming() - Start sensor stream
  * @ov9282: pointer to ov9282 device
@@ -938,6 +1012,7 @@ static const struct v4l2_subdev_pad_ops ov9282_pad_ops = {
 	.enum_frame_size = ov9282_enum_frame_size,
 	.get_fmt = ov9282_get_pad_format,
 	.set_fmt = ov9282_set_pad_format,
+	.get_selection = ov9282_get_selection,
 };
 
 static const struct v4l2_subdev_ops ov9282_subdev_ops = {