Commit 2ce420da authored by Shawn Guo's avatar Shawn Guo Committed by Grant Likely

gpio/mxc: convert gpio-mxc to use basic_mmio_gpio library

The gpio-mxc controller complies with basic_mmio_gpio library.  The
patch convert the driver to use the library.
Signed-off-by: default avatarShawn Guo <shawn.guo@linaro.org>
Acked-by: default avatarSascha Hauer <s.hauer@pengutronix.de>
Signed-off-by: default avatarGrant Likely <grant.likely@secretlab.ca>
parent b78d8e59
......@@ -100,6 +100,7 @@ config GPIO_MXS
config GPIO_MXC
def_bool y
depends on ARCH_MXC
select GPIO_BASIC_MMIO_CORE
config GPIO_PLAT_SAMSUNG
bool "Samsung SoCs GPIO library support"
......
......@@ -26,6 +26,7 @@
#include <linux/gpio.h>
#include <linux/platform_device.h>
#include <linux/slab.h>
#include <linux/basic_mmio_gpio.h>
#include <mach/hardware.h>
#include <asm-generic/bug.h>
......@@ -35,9 +36,8 @@ struct mxc_gpio_port {
int irq;
int irq_high;
int virtual_irq_start;
struct gpio_chip chip;
struct bgpio_chip bgc;
u32 both_edges;
spinlock_t lock;
};
/*
......@@ -101,8 +101,6 @@ static void gpio_unmask_irq(struct irq_data *d)
_set_gpio_irqenable(port, gpio & 0x1f, 1);
}
static int mxc_gpio_get(struct gpio_chip *chip, unsigned offset);
static int gpio_set_irq_type(struct irq_data *d, u32 type)
{
u32 gpio = irq_to_gpio(d->irq);
......@@ -120,7 +118,7 @@ static int gpio_set_irq_type(struct irq_data *d, u32 type)
edge = GPIO_INT_FALL_EDGE;
break;
case IRQ_TYPE_EDGE_BOTH:
val = mxc_gpio_get(&port->chip, gpio & 31);
val = gpio_get_value(gpio & 31);
if (val) {
edge = GPIO_INT_LOW_LEV;
pr_debug("mxc: set GPIO %d to low trigger\n", gpio);
......@@ -259,60 +257,6 @@ static struct irq_chip gpio_irq_chip = {
.irq_set_wake = gpio_set_wake_irq,
};
static void _set_gpio_direction(struct gpio_chip *chip, unsigned offset,
int dir)
{
struct mxc_gpio_port *port =
container_of(chip, struct mxc_gpio_port, chip);
u32 l;
unsigned long flags;
spin_lock_irqsave(&port->lock, flags);
l = readl(port->base + GPIO_GDIR);
if (dir)
l |= 1 << offset;
else
l &= ~(1 << offset);
writel(l, port->base + GPIO_GDIR);
spin_unlock_irqrestore(&port->lock, flags);
}
static void mxc_gpio_set(struct gpio_chip *chip, unsigned offset, int value)
{
struct mxc_gpio_port *port =
container_of(chip, struct mxc_gpio_port, chip);
void __iomem *reg = port->base + GPIO_DR;
u32 l;
unsigned long flags;
spin_lock_irqsave(&port->lock, flags);
l = (readl(reg) & (~(1 << offset))) | (!!value << offset);
writel(l, reg);
spin_unlock_irqrestore(&port->lock, flags);
}
static int mxc_gpio_get(struct gpio_chip *chip, unsigned offset)
{
struct mxc_gpio_port *port =
container_of(chip, struct mxc_gpio_port, chip);
return (readl(port->base + GPIO_PSR) >> offset) & 1;
}
static int mxc_gpio_direction_input(struct gpio_chip *chip, unsigned offset)
{
_set_gpio_direction(chip, offset, 0);
return 0;
}
static int mxc_gpio_direction_output(struct gpio_chip *chip,
unsigned offset, int value)
{
mxc_gpio_set(chip, offset, value);
_set_gpio_direction(chip, offset, 1);
return 0;
}
/*
* This lock class tells lockdep that GPIO irqs are in a different
* category than their parents, so it won't report false recursion.
......@@ -385,24 +329,25 @@ static int __devinit mxc_gpio_probe(struct platform_device *pdev)
}
}
/* register gpio chip */
port->chip.direction_input = mxc_gpio_direction_input;
port->chip.direction_output = mxc_gpio_direction_output;
port->chip.get = mxc_gpio_get;
port->chip.set = mxc_gpio_set;
port->chip.base = pdev->id * 32;
port->chip.ngpio = 32;
err = bgpio_init(&port->bgc, &pdev->dev, 4,
port->base + GPIO_PSR,
port->base + GPIO_DR, NULL,
port->base + GPIO_GDIR, NULL, false);
if (err)
goto out_iounmap;
spin_lock_init(&port->lock);
port->bgc.gc.base = pdev->id * 32;
err = gpiochip_add(&port->chip);
err = gpiochip_add(&port->bgc.gc);
if (err)
goto out_iounmap;
goto out_bgpio_remove;
list_add_tail(&port->node, &mxc_gpio_ports);
return 0;
out_bgpio_remove:
bgpio_remove(&port->bgc);
out_iounmap:
iounmap(port->base);
out_release_mem:
......
Markdown is supported
0%
or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment