Skip to content

L
linux
Commit 2d22c7dd authored by Sujith Manoharan's avatar Sujith Manoharan Committed by John W. Linville
Browse files
Options

ath9k: Use correct PCIE initvals for AR9485 

Currently, the PLL is turned off for AR9485 when
switching to a low power state, but AR9485 has an issue
where the card will become unresponsive if left idle
for a long time without any traffic. To fix this,
force the PLL to always be on using a different initval
array, ar9485_1_1_pll_on_cdr_on_clkreq_disable_L1.

This is done for most of the AR9485 based cards
like HB125, WB225 etc. but certain models require the
feature to be turned off. Identify such cards and use
default values for them.
Signed-off-by: default avatarSujith Manoharan <c_manoha@qca.qualcomm.com>
Signed-off-by: default avatarJohn W. Linville <linville@tuxdriver.com>
parent 876efcf0
Hide whitespace changes
Inline Side-by-side
Showing with 128 additions and 48 deletions
drivers/net/wireless/ath/ath9k/ar9003_hw.c
View file @ 2d22c7dd
......@@ -187,17 +187,17 @@ static void ar9003_hw_init_mode_regs(struct ath_hw *ah)
INIT_INI_ARRAY(&ah->iniCckfirJapan2484,
ar9485_1_1_baseband_core_txfir_coeff_japan_2484);
/* Load PCIE SERDES settings from INI */
/* Awake Setting */
INIT_INI_ARRAY(&ah->iniPcieSerdes,
ar9485_1_1_pcie_phy_clkreq_disable_L1);
/* Sleep Setting */
INIT_INI_ARRAY(&ah->iniPcieSerdesLowPower,
ar9485_1_1_pcie_phy_clkreq_disable_L1);
if (ah->config.no_pll_pwrsave) {
INIT_INI_ARRAY(&ah->iniPcieSerdes,
ar9485_1_1_pcie_phy_clkreq_disable_L1);
INIT_INI_ARRAY(&ah->iniPcieSerdesLowPower,
ar9485_1_1_pcie_phy_clkreq_disable_L1);
} else {
INIT_INI_ARRAY(&ah->iniPcieSerdes,
ar9485_1_1_pll_on_cdr_on_clkreq_disable_L1);
INIT_INI_ARRAY(&ah->iniPcieSerdesLowPower,
ar9485_1_1_pll_on_cdr_on_clkreq_disable_L1);
}
} else if (AR_SREV_9462_21(ah)) {
INIT_INI_ARRAY(&ah->iniMac[ATH_INI_CORE],
ar9462_2p1_mac_core);
......
drivers/net/wireless/ath/ath9k/ar9485_initvals.h
View file @ 2d22c7dd
......@@ -32,13 +32,6 @@ static const u32 ar9485_1_1_mac_postamble[][5] = {
{0x00008318, 0x00003e80, 0x00007d00, 0x00006880, 0x00003440},
};
static const u32 ar9485_1_1_pcie_phy_pll_on_clkreq_disable_L1[][2] = {
/* Addr allmodes */
{0x00018c00, 0x18012e5e},
{0x00018c04, 0x000801d8},
{0x00018c08, 0x0000080c},
};
static const u32 ar9485Common_wo_xlna_rx_gain_1_1[][2] = {
/* Addr allmodes */
{0x00009e00, 0x037216a0},
......@@ -1101,20 +1094,6 @@ static const u32 ar9485_common_rx_gain_1_1[][2] = {
{0x0000a1fc, 0x00000296},
};
static const u32 ar9485_1_1_pcie_phy_pll_on_clkreq_enable_L1[][2] = {
/* Addr allmodes */
{0x00018c00, 0x18052e5e},
{0x00018c04, 0x000801d8},
{0x00018c08, 0x0000080c},
};
static const u32 ar9485_1_1_pcie_phy_clkreq_enable_L1[][2] = {
/* Addr allmodes */
{0x00018c00, 0x18053e5e},
{0x00018c04, 0x000801d8},
{0x00018c08, 0x0000080c},
};
static const u32 ar9485_1_1_soc_preamble[][2] = {
/* Addr allmodes */
{0x00004014, 0xba280400},
......@@ -1173,13 +1152,6 @@ static const u32 ar9485_1_1_baseband_postamble[][5] = {
{0x0000be18, 0x00000000, 0x00000000, 0x00000000, 0x00000000},
};
static const u32 ar9485_1_1_pcie_phy_clkreq_disable_L1[][2] = {
/* Addr allmodes */
{0x00018c00, 0x18013e5e},
{0x00018c04, 0x000801d8},
{0x00018c08, 0x0000080c},
};
static const u32 ar9485_1_1_radio_postamble[][2] = {
/* Addr allmodes */
{0x0001609c, 0x0b283f31},
......@@ -1358,4 +1330,18 @@ static const u32 ar9485_1_1_baseband_core_txfir_coeff_japan_2484[][2] = {
{0x0000a3a0, 0xca9228ee},
};
static const u32 ar9485_1_1_pcie_phy_clkreq_disable_L1[][2] = {
/* Addr allmodes */
{0x00018c00, 0x18013e5e},
{0x00018c04, 0x000801d8},
{0x00018c08, 0x0000080c},
};
static const u32 ar9485_1_1_pll_on_cdr_on_clkreq_disable_L1[][2] = {
/* Addr allmodes */
{0x00018c00, 0x1801265e},
{0x00018c04, 0x000801d8},
{0x00018c08, 0x0000080c},
};
#endif /* INITVALS_9485_H */
drivers/net/wireless/ath/ath9k/ath9k.h
View file @ 2d22c7dd
......@@ -632,15 +632,16 @@ void ath_ant_comb_scan(struct ath_softc *sc, struct ath_rx_status *rs);
/* Main driver core */
/********************/
#define ATH9K_PCI_CUS198 0x0001
#define ATH9K_PCI_CUS230 0x0002
#define ATH9K_PCI_CUS217 0x0004
#define ATH9K_PCI_CUS252 0x0008
#define ATH9K_PCI_WOW 0x0010
#define ATH9K_PCI_BT_ANT_DIV 0x0020
#define ATH9K_PCI_D3_L1_WAR 0x0040
#define ATH9K_PCI_AR9565_1ANT 0x0080
#define ATH9K_PCI_AR9565_2ANT 0x0100
#define ATH9K_PCI_CUS198 0x0001
#define ATH9K_PCI_CUS230 0x0002
#define ATH9K_PCI_CUS217 0x0004
#define ATH9K_PCI_CUS252 0x0008
#define ATH9K_PCI_WOW 0x0010
#define ATH9K_PCI_BT_ANT_DIV 0x0020
#define ATH9K_PCI_D3_L1_WAR 0x0040
#define ATH9K_PCI_AR9565_1ANT 0x0080
#define ATH9K_PCI_AR9565_2ANT 0x0100
#define ATH9K_PCI_NO_PLL_PWRSAVE 0x0200
/*
* Default cache line size, in bytes.
......
drivers/net/wireless/ath/ath9k/hw.h
View file @ 2d22c7dd
......@@ -316,6 +316,7 @@ struct ath9k_ops_config {
u32 ant_ctrl_comm2g_switch_enable;
bool xatten_margin_cfg;
bool alt_mingainidx;
bool no_pll_pwrsave;
};
enum ath9k_int {
......
drivers/net/wireless/ath/ath9k/init.c
View file @ 2d22c7dd
......@@ -609,6 +609,11 @@ static void ath9k_init_platform(struct ath_softc *sc)
ah->config.pcie_waen = 0x0040473b;
ath_info(common, "Enable WAR for ASPM D3/L1\n");
}
if (sc->driver_data & ATH9K_PCI_NO_PLL_PWRSAVE) {
ah->config.no_pll_pwrsave = true;
ath_info(common, "Disable PLL PowerSave\n");
}
}
static void ath9k_eeprom_request_cb(const struct firmware *eeprom_blob,
......
drivers/net/wireless/ath/ath9k/pci.c
View file @ 2d22c7dd
......@@ -195,6 +195,93 @@ static DEFINE_PCI_DEVICE_TABLE(ath_pci_id_table) = {
0x3219),
.driver_data = ATH9K_PCI_BT_ANT_DIV },
/* AR9485 cards with PLL power-save disabled by default. */
{ PCI_DEVICE_SUB(PCI_VENDOR_ID_ATHEROS,
0x0032,
PCI_VENDOR_ID_AZWAVE,
0x2C97),
.driver_data = ATH9K_PCI_NO_PLL_PWRSAVE },
{ PCI_DEVICE_SUB(PCI_VENDOR_ID_ATHEROS,
0x0032,
PCI_VENDOR_ID_AZWAVE,
0x2100),
.driver_data = ATH9K_PCI_NO_PLL_PWRSAVE },
{ PCI_DEVICE_SUB(PCI_VENDOR_ID_ATHEROS,
0x0032,
0x1C56, /* ASKEY */
0x4001),
.driver_data = ATH9K_PCI_NO_PLL_PWRSAVE },
{ PCI_DEVICE_SUB(PCI_VENDOR_ID_ATHEROS,
0x0032,
0x11AD, /* LITEON */
0x6627),
.driver_data = ATH9K_PCI_NO_PLL_PWRSAVE },
{ PCI_DEVICE_SUB(PCI_VENDOR_ID_ATHEROS,
0x0032,
0x11AD, /* LITEON */
0x6628),
.driver_data = ATH9K_PCI_NO_PLL_PWRSAVE },
{ PCI_DEVICE_SUB(PCI_VENDOR_ID_ATHEROS,
0x0032,
PCI_VENDOR_ID_FOXCONN,
0xE04E),
.driver_data = ATH9K_PCI_NO_PLL_PWRSAVE },
{ PCI_DEVICE_SUB(PCI_VENDOR_ID_ATHEROS,
0x0032,
PCI_VENDOR_ID_FOXCONN,
0xE04F),
.driver_data = ATH9K_PCI_NO_PLL_PWRSAVE },
{ PCI_DEVICE_SUB(PCI_VENDOR_ID_ATHEROS,
0x0032,
0x144F, /* ASKEY */
0x7197),
.driver_data = ATH9K_PCI_NO_PLL_PWRSAVE },
{ PCI_DEVICE_SUB(PCI_VENDOR_ID_ATHEROS,
0x0032,
0x1B9A, /* XAVI */
0x2000),
.driver_data = ATH9K_PCI_NO_PLL_PWRSAVE },
{ PCI_DEVICE_SUB(PCI_VENDOR_ID_ATHEROS,
0x0032,
0x1B9A, /* XAVI */
0x2001),
.driver_data = ATH9K_PCI_NO_PLL_PWRSAVE },
{ PCI_DEVICE_SUB(PCI_VENDOR_ID_ATHEROS,
0x0032,
PCI_VENDOR_ID_AZWAVE,
0x1186),
.driver_data = ATH9K_PCI_NO_PLL_PWRSAVE },
{ PCI_DEVICE_SUB(PCI_VENDOR_ID_ATHEROS,
0x0032,
PCI_VENDOR_ID_AZWAVE,
0x1F86),
.driver_data = ATH9K_PCI_NO_PLL_PWRSAVE },
{ PCI_DEVICE_SUB(PCI_VENDOR_ID_ATHEROS,
0x0032,
PCI_VENDOR_ID_AZWAVE,
0x1195),
.driver_data = ATH9K_PCI_NO_PLL_PWRSAVE },
{ PCI_DEVICE_SUB(PCI_VENDOR_ID_ATHEROS,
0x0032,
PCI_VENDOR_ID_AZWAVE,
0x1F95),
.driver_data = ATH9K_PCI_NO_PLL_PWRSAVE },
{ PCI_DEVICE_SUB(PCI_VENDOR_ID_ATHEROS,
0x0032,
0x1B9A, /* XAVI */
0x1C00),
.driver_data = ATH9K_PCI_NO_PLL_PWRSAVE },
{ PCI_DEVICE_SUB(PCI_VENDOR_ID_ATHEROS,
0x0032,
0x1B9A, /* XAVI */
0x1C01),
.driver_data = ATH9K_PCI_NO_PLL_PWRSAVE },
{ PCI_DEVICE_SUB(PCI_VENDOR_ID_ATHEROS,
0x0032,
PCI_VENDOR_ID_ASUSTEK,
0x850D),
.driver_data = ATH9K_PCI_NO_PLL_PWRSAVE },
{ PCI_VDEVICE(ATHEROS, 0x0032) }, /* PCI-E AR9485 */
{ PCI_VDEVICE(ATHEROS, 0x0033) }, /* PCI-E AR9580 */
......
Markdown is supported
0% or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment
GitLab Nexedi Edition | About GitLab | About Nexedi | 沪ICP备2021021310号-2 | 沪ICP备2021021310号-7