Skip to content

L
linux
Commit 2d2430cf authored by Daniel Vetter's avatar Daniel Vetter Committed by Chris Wilson
Browse files
Options

intel-gtt: consolidate i9xx setup 

The only difference between i915 and i965 was the calculation of the
gtt address. So merge these two paths into one. Otherwise the same
changes as in the i830 setup consolidation.
Signed-off-by: default avatarDaniel Vetter <daniel.vetter@ffwll.ch>
Signed-off-by: default avatarChris Wilson <chris@chris-wilson.co.uk>
parent 73800422
Hide whitespace changes
Inline Side-by-side
Showing with 61 additions and 93 deletions
drivers/char/agp/intel-gtt.c
View file @ 2d2430cf
......@@ -903,7 +903,13 @@ static void intel_enable_gtt(void)
ptetbl_addr = readl(intel_private.registers+I810_PGETBL_CTL) & 0xfffff000;
pci_read_config_dword(intel_private.pcidev, I810_GMADDR, &gma_addr);
if (INTEL_GTT_GEN == 2)
pci_read_config_dword(intel_private.pcidev, I810_GMADDR,
&gma_addr);
else
pci_read_config_dword(intel_private.pcidev, I915_GMADDR,
&gma_addr);
intel_private.gma_bus_addr = (gma_addr & PCI_BASE_ADDRESS_MEM_MASK);
pci_read_config_word(intel_private.bridge_dev, I830_GMCH_CTRL, &gmch_ctrl);
......@@ -1165,23 +1171,11 @@ static void intel_i9xx_setup_flush(void)
static int intel_i9xx_configure(void)
{
struct aper_size_info_fixed *current_size;
u32 temp;
u16 gmch_ctrl;
int i;
current_size = A_SIZE_FIX(agp_bridge->current_size);
pci_read_config_dword(intel_private.pcidev, I915_GMADDR, &temp);
agp_bridge->gart_bus_addr = (temp & PCI_BASE_ADDRESS_MEM_MASK);
pci_read_config_word(intel_private.bridge_dev, I830_GMCH_CTRL, &gmch_ctrl);
gmch_ctrl |= I830_GMCH_ENABLED;
pci_write_config_word(intel_private.bridge_dev, I830_GMCH_CTRL, gmch_ctrl);
intel_enable_gtt();
writel(agp_bridge->gatt_bus_addr|I810_PGETBL_ENABLED, intel_private.registers+I810_PGETBL_CTL);
readl(intel_private.registers+I810_PGETBL_CTL); /* PCI Posting. */
agp_bridge->gart_bus_addr = intel_private.gma_bus_addr;
if (agp_bridge->driver->needs_scratch_page) {
for (i = intel_private.base.gtt_stolen_entries; i <
......@@ -1193,8 +1187,6 @@ static int intel_i9xx_configure(void)
global_cache_flush();
intel_i9xx_setup_flush();
return 0;
}
......@@ -1291,40 +1283,62 @@ static int intel_i915_remove_entries(struct agp_memory *mem, off_t pg_start,
return 0;
}
/* The intel i915 automatically initializes the agp aperture during POST.
* Use the memory already set aside for in the GTT.
*/
static int intel_i915_create_gatt_table(struct agp_bridge_data *bridge)
static int i9xx_setup(void)
{
int page_order, ret;
struct aper_size_info_fixed *size;
int num_entries;
u32 temp, temp2;
size = agp_bridge->current_size;
page_order = size->page_order;
num_entries = size->num_entries;
agp_bridge->gatt_table_real = NULL;
u32 reg_addr;
pci_read_config_dword(intel_private.pcidev, I915_MMADDR, &temp);
pci_read_config_dword(intel_private.pcidev, I915_PTEADDR, &temp2);
pci_read_config_dword(intel_private.pcidev, I915_MMADDR, &reg_addr);
temp &= 0xfff80000;
reg_addr &= 0xfff80000;
intel_private.registers = ioremap(temp, 128 * 4096);
intel_private.registers = ioremap(reg_addr, 128 * 4096);
if (!intel_private.registers)
return -ENOMEM;
intel_private.gtt_bus_addr = temp2;
temp = readl(intel_private.registers+I810_PGETBL_CTL) & 0xfffff000;
if (INTEL_GTT_GEN == 3) {
u32 gtt_addr;
pci_read_config_dword(intel_private.pcidev,
I915_PTEADDR, &gtt_addr);
intel_private.gtt_bus_addr = gtt_addr;
} else {
u32 gtt_offset;
switch (INTEL_GTT_GEN) {
case 5:
case 6:
gtt_offset = MB(2);
break;
case 4:
default:
gtt_offset = KB(512);
break;
}
intel_private.gtt_bus_addr = reg_addr + gtt_offset;
}
intel_i9xx_setup_flush();
return 0;
}
/* The intel i915 automatically initializes the agp aperture during POST.
* Use the memory already set aside for in the GTT.
*/
static int intel_i915_create_gatt_table(struct agp_bridge_data *bridge)
{
int ret;
ret = intel_private.driver->setup();
if (ret != 0)
return ret;
ret = intel_gtt_init();
if (ret != 0)
return ret;
agp_bridge->gatt_table_real = NULL;
agp_bridge->gatt_table = NULL;
agp_bridge->gatt_bus_addr = temp;
agp_bridge->gatt_bus_addr = 0;
return 0;
}
......@@ -1358,59 +1372,6 @@ static unsigned long intel_gen6_mask_memory(struct agp_bridge_data *bridge,
return addr | bridge->driver->masks[type].mask;
}
static void intel_i965_get_gtt_range(int *gtt_offset)
{
switch (INTEL_GTT_GEN) {
case 5:
case 6:
*gtt_offset = MB(2);
break;
case 4:
default:
*gtt_offset = KB(512);
break;
}
}
/* The intel i965 automatically initializes the agp aperture during POST.
* Use the memory already set aside for in the GTT.
*/
static int intel_i965_create_gatt_table(struct agp_bridge_data *bridge)
{
int page_order, ret;
struct aper_size_info_fixed *size;
int num_entries;
u32 temp;
int gtt_offset;
size = agp_bridge->current_size;
page_order = size->page_order;
num_entries = size->num_entries;
agp_bridge->gatt_table_real = NULL;
pci_read_config_dword(intel_private.pcidev, I915_MMADDR, &temp);
temp &= 0xfff00000;
intel_private.registers = ioremap(temp, 128 * 4096);
if (!intel_private.registers)
return -ENOMEM;
intel_i965_get_gtt_range(&gtt_offset);
intel_private.gtt_bus_addr = temp + gtt_offset;
temp = readl(intel_private.registers+I810_PGETBL_CTL) & 0xfffff000;
ret = intel_gtt_init();
if (ret != 0)
return ret;
agp_bridge->gatt_table = NULL;
agp_bridge->gatt_bus_addr = temp;
return 0;
}
static const struct agp_bridge_driver intel_810_driver = {
.owner = THIS_MODULE,
.aperture_sizes = intel_i810_sizes,
......@@ -1510,7 +1471,7 @@ static const struct agp_bridge_driver intel_i965_driver = {
.masks = intel_i810_masks,
.agp_enable = intel_fake_agp_enable,
.cache_flush = global_cache_flush,
.create_gatt_table = intel_i965_create_gatt_table,
.create_gatt_table = intel_i915_create_gatt_table,
.free_gatt_table = intel_fake_agp_free_gatt_table,
.insert_memory = intel_i915_insert_entries,
.remove_memory = intel_i915_remove_entries,
......@@ -1543,7 +1504,7 @@ static const struct agp_bridge_driver intel_gen6_driver = {
.masks = intel_gen6_masks,
.agp_enable = intel_fake_agp_enable,
.cache_flush = global_cache_flush,
.create_gatt_table = intel_i965_create_gatt_table,
.create_gatt_table = intel_i915_create_gatt_table,
.free_gatt_table = intel_fake_agp_free_gatt_table,
.insert_memory = intel_i915_insert_entries,
.remove_memory = intel_i915_remove_entries,
......@@ -1602,27 +1563,34 @@ static const struct intel_gtt_driver i8xx_gtt_driver = {
};
static const struct intel_gtt_driver i915_gtt_driver = {
.gen = 3,
.setup = i9xx_setup,
};
static const struct intel_gtt_driver g33_gtt_driver = {
.gen = 3,
.is_g33 = 1,
.setup = i9xx_setup,
};
static const struct intel_gtt_driver pineview_gtt_driver = {
.gen = 3,
.is_pineview = 1, .is_g33 = 1,
.setup = i9xx_setup,
};
static const struct intel_gtt_driver i965_gtt_driver = {
.gen = 4,
.setup = i9xx_setup,
};
static const struct intel_gtt_driver g4x_gtt_driver = {
.gen = 5,
.setup = i9xx_setup,
};
static const struct intel_gtt_driver ironlake_gtt_driver = {
.gen = 5,
.is_ironlake = 1,
.setup = i9xx_setup,
};
static const struct intel_gtt_driver sandybridge_gtt_driver = {
.gen = 6,
.setup = i9xx_setup,
};
/* Table to describe Intel GMCH and AGP/PCIE GART drivers. At least one of
......
Markdown is supported
0% or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment
GitLab Nexedi Edition | About GitLab | About Nexedi | 沪ICP备2021021310号-2 | 沪ICP备2021021310号-7