Commit 2e04c25b authored by Akash Gajjar's avatar Akash Gajjar Committed by Heiko Stuebner

arm64: dts: rockchip: add ROCK Pi S DTS support

ROCK Pi S is RK3308 based SBC from radxa.com. ROCK Pi S has a,
- 256MB/512MB DDR3 RAM
- SD, NAND flash (optional on board 1/2/4/8Gb)
- 100MB ethernet, PoE (optional)
- Onboard 802.11 b/g/n wifi + Bluetooth 4.0 Module
- USB2.0 Type-A HOST x1
- USB3.0 Type-C OTG x1
- 26-pin expansion header
- USB Type-C DC 5V Power Supply

This patch enables
- Console
- NAND Flash
- SD Card
Signed-off-by: default avatarAkash Gajjar <akash@openedev.com>
[sjoerd: Sort dt nodes, drop properties duplicated from dtsi]
Signed-off-by: default avatarSjoerd Simons <sjoerd@collabora.com>
Link: https://lore.kernel.org/r/20220614064858.1445817-3-sjoerd@collabora.comSigned-off-by: default avatarHeiko Stuebner <heiko@sntech.de>
parent 5a86111e
......@@ -5,6 +5,7 @@ dtb-$(CONFIG_ARCH_ROCKCHIP) += px30-engicam-px30-core-ctouch2-of10.dtb
dtb-$(CONFIG_ARCH_ROCKCHIP) += px30-engicam-px30-core-edimm2.2.dtb
dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3308-evb.dtb
dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3308-roc-cc.dtb
dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3308-rock-pi-s.dtb
dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3318-a95x-z2.dtb
dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3326-odroid-go2.dtb
dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3328-a1.dtb
......
// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
/*
* Copyright (c) 2019 Akash Gajjar <akash@openedev.com>
* Copyright (c) 2019 Jagan Teki <jagan@openedev.com>
*/
/dts-v1/;
#include "rk3308.dtsi"
/ {
model = "Radxa ROCK Pi S";
compatible = "radxa,rockpis", "rockchip,rk3308";
chosen {
stdout-path = "serial0:1500000n8";
};
leds {
compatible = "gpio-leds";
pinctrl-names = "default";
pinctrl-0 = <&green_led_gio>, <&heartbeat_led_gpio>;
green-led {
default-state = "on";
gpios = <&gpio0 RK_PA6 GPIO_ACTIVE_HIGH>;
label = "rockpis:green:power";
linux,default-trigger = "default-on";
};
blue-led {
default-state = "on";
gpios = <&gpio0 RK_PA5 GPIO_ACTIVE_HIGH>;
label = "rockpis:blue:user";
linux,default-trigger = "heartbeat";
};
};
sdio_pwrseq: sdio-pwrseq {
compatible = "mmc-pwrseq-simple";
pinctrl-0 = <&wifi_enable_h>;
pinctrl-names = "default";
reset-gpios = <&gpio0 RK_PA2 GPIO_ACTIVE_LOW>;
};
vcc_1v8: vcc-1v8 {
compatible = "regulator-fixed";
regulator-name = "vcc_1v8";
regulator-always-on;
regulator-boot-on;
regulator-min-microvolt = <1800000>;
regulator-max-microvolt = <1800000>;
vin-supply = <&vcc_io>;
};
vcc_io: vcc-io {
compatible = "regulator-fixed";
regulator-name = "vcc_io";
regulator-always-on;
regulator-boot-on;
regulator-min-microvolt = <3300000>;
regulator-max-microvolt = <3300000>;
vin-supply = <&vcc5v0_sys>;
};
vcc_ddr: vcc-ddr {
compatible = "regulator-fixed";
regulator-name = "vcc_ddr";
regulator-always-on;
regulator-boot-on;
regulator-min-microvolt = <1500000>;
regulator-max-microvolt = <1500000>;
vin-supply = <&vcc5v0_sys>;
};
vcc5v0_otg: vcc5v0-otg {
compatible = "regulator-fixed";
enable-active-high;
gpio = <&gpio0 RK_PC5 GPIO_ACTIVE_HIGH>;
pinctrl-names = "default";
pinctrl-0 = <&otg_vbus_drv>;
regulator-name = "vcc5v0_otg";
regulator-always-on;
vin-supply = <&vcc5v0_sys>;
};
vcc5v0_sys: vcc5v0-sys {
compatible = "regulator-fixed";
regulator-name = "vcc5v0_sys";
regulator-always-on;
regulator-boot-on;
regulator-min-microvolt = <5000000>;
regulator-max-microvolt = <5000000>;
};
vdd_core: vdd-core {
compatible = "pwm-regulator";
pwms = <&pwm0 0 5000 1>;
pwm-supply = <&vcc5v0_sys>;
regulator-name = "vdd_core";
regulator-min-microvolt = <827000>;
regulator-max-microvolt = <1340000>;
regulator-init-microvolt = <1015000>;
regulator-settling-time-up-us = <250>;
regulator-always-on;
regulator-boot-on;
};
vdd_log: vdd-log {
compatible = "regulator-fixed";
regulator-name = "vdd_log";
regulator-always-on;
regulator-boot-on;
regulator-min-microvolt = <1050000>;
regulator-max-microvolt = <1050000>;
vin-supply = <&vcc5v0_sys>;
};
};
&cpu0 {
cpu-supply = <&vdd_core>;
};
&emmc {
bus-width = <4>;
cap-mmc-highspeed;
mmc-hs200-1_8v;
non-removable;
vmmc-supply = <&vcc_io>;
status = "okay";
};
&i2c1 {
status = "okay";
};
&pinctrl {
pinctrl-names = "default";
pinctrl-0 = <&rtc_32k>;
leds {
green_led_gio: green-led-gpio {
rockchip,pins = <0 RK_PA6 RK_FUNC_GPIO &pcfg_pull_none>;
};
heartbeat_led_gpio: heartbeat-led-gpio {
rockchip,pins = <0 RK_PA5 RK_FUNC_GPIO &pcfg_pull_none>;
};
};
usb {
otg_vbus_drv: otg-vbus-drv {
rockchip,pins = <0 RK_PC5 RK_FUNC_GPIO &pcfg_pull_none>;
};
};
sdio-pwrseq {
wifi_enable_h: wifi-enable-h {
rockchip,pins = <0 RK_PA2 RK_FUNC_GPIO &pcfg_pull_none>;
};
wifi_host_wake: wifi-host-wake {
rockchip,pins = <0 RK_PA0 RK_FUNC_GPIO &pcfg_pull_down>;
};
};
};
&pwm0 {
status = "okay";
pinctrl-0 = <&pwm0_pin_pull_down>;
};
&saradc {
vref-supply = <&vcc_1v8>;
status = "okay";
};
&sdio {
#address-cells = <1>;
#size-cells = <0>;
cap-sd-highspeed;
cap-sdio-irq;
keep-power-in-suspend;
max-frequency = <1000000>;
mmc-pwrseq = <&sdio_pwrseq>;
non-removable;
sd-uhs-sdr104;
status = "okay";
};
&sdmmc {
cap-sd-highspeed;
status = "okay";
};
&uart0 {
status = "okay";
};
&uart4 {
status = "okay";
};
Markdown is supported
0%
or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment