s390/qeth: handle error due to unsupported transport mode

Along with z/VM NICs, there's additional device types that only support
a specific transport mode (eg. external-bridged IQD).
Identify the corresponding error code, and raise a fitting error message
so that the user knows to adjust their device configuration.

On top of that also fix the subsequent error path, so that the rejected
cmd doesn't need to wait for a timeout but gets cancelled straight away.

Fixes: 4a71df50 ("qeth: new qeth device driver")
Signed-off-by: Julian Wiedmann <jwi@linux.ibm.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

drivers/s390/net/qeth_core_main.c

@@ -655,17 +655,17 @@ static int qeth_check_idx_response(struct qeth_card *card,
 	unsigned char *buffer)
 {
 	QETH_DBF_HEX(CTRL, 2, buffer, QETH_DBF_CTRL_LEN);
-	if ((buffer[2] & 0xc0) == 0xc0) {
+	if ((buffer[2] & QETH_IDX_TERMINATE_MASK) == QETH_IDX_TERMINATE) {
 		QETH_DBF_MESSAGE(2, "received an IDX TERMINATE with cause code %#04x\n",
 				 buffer[4]);
 		QETH_CARD_TEXT(card, 2, "ckidxres");
 		QETH_CARD_TEXT(card, 2, " idxterm");
-		QETH_CARD_TEXT_(card, 2, "  rc%d", -EIO);
-		if (buffer[4] == 0xf6) {
+		QETH_CARD_TEXT_(card, 2, "rc%x", buffer[4]);
+		if (buffer[4] == QETH_IDX_TERM_BAD_TRANSPORT ||
+		    buffer[4] == QETH_IDX_TERM_BAD_TRANSPORT_VM) {
 			dev_err(&card->gdev->dev,
-			"The qeth device is not configured "
-			"for the OSI layer required by z/VM\n");
-			return -EPERM;
+				"The device does not support the configured transport mode\n");
+			return -EPROTONOSUPPORT;
 		}
 		return -EIO;
 	}
@@ -742,10 +742,10 @@ static void qeth_issue_next_read_cb(struct qeth_card *card,
 	case 0:
 		break;
 	case -EIO:
-		qeth_clear_ipacmd_list(card);
 		qeth_schedule_recovery(card);
 		/* fall through */
 	default:
+		qeth_clear_ipacmd_list(card);
 		goto out;
 	}
 

drivers/s390/net/qeth_core_mpc.h

@@ -899,6 +899,11 @@ extern unsigned char IDX_ACTIVATE_WRITE[];
 #define QETH_IDX_ACT_ERR_AUTH		0x1E
 #define QETH_IDX_ACT_ERR_AUTH_USER	0x20
 
+#define QETH_IDX_TERMINATE		0xc0
+#define QETH_IDX_TERMINATE_MASK		0xc0
+#define QETH_IDX_TERM_BAD_TRANSPORT	0x41
+#define QETH_IDX_TERM_BAD_TRANSPORT_VM	0xf6
+
 #define PDU_ENCAPSULATION(buffer) \
 	(buffer + *(buffer + (*(buffer + 0x0b)) + \
 	 *(buffer + *(buffer + 0x0b) + 0x11) + 0x07))