wifi: rtw89: 8852b: reset IDMEM mode to default value

For different firmware type, it could use different IDMEM mode, so reset
it to default to avoid encountering error during we bisect firmware
version, like

  rtw89_8852be 0000:03:00.0: Firmware version 0.29.26.0, cmd version 0, type 5
  rtw89_8852be 0000:03:00.0: Firmware version 0.29.26.0, cmd version 0, type 3
  rtw89_8852be 0000:03:00.0: fw security fail
  rtw89_8852be 0000:03:00.0: download firmware fail
  rtw89_8852be 0000:03:00.0: [ERR]fwdl 0x1E0 = 0x62
  rtw89_8852be 0000:03:00.0: [ERR]fwdl 0x83F2 = 0x8
  rtw89_8852be 0000:03:00.0: [ERR]fw PC = 0xb8931154
  rtw89_8852be 0000:03:00.0: [ERR]fw PC = 0xb8931154
  rtw89_8852be 0000:03:00.0: [ERR]fw PC = 0xb8931150
  rtw89_8852be 0000:03:00.0: [ERR]fw PC = 0xb8931154
Signed-off-by: Ping-Ke Shih <pkshih@realtek.com>
Signed-off-by: Kalle Valo <kvalo@kernel.org>
Link: https://lore.kernel.org/r/20230123065401.14174-5-pkshih@realtek.com

drivers/net/wireless/realtek/rtw89/mac.c

@@ -3414,6 +3414,11 @@ int rtw89_mac_enable_cpu(struct rtw89_dev *rtwdev, u8 boot_reason, bool dlfw)
 		val |= B_AX_WCPU_FWDL_EN;
 
 	rtw89_write32(rtwdev, R_AX_WCPU_FW_CTRL, val);
+
+	if (rtwdev->chip->chip_id == RTL8852B)
+		rtw89_write32_mask(rtwdev, R_AX_SEC_CTRL,
+				   B_AX_SEC_IDMEM_SIZE_CONFIG_MASK, 0x2);
+
 	rtw89_write16_mask(rtwdev, R_AX_BOOT_REASON, B_AX_BOOT_REASON_MASK,
 			   boot_reason);
 	rtw89_write32_set(rtwdev, R_AX_PLATFORM_ENABLE, B_AX_WCPU_EN);

drivers/net/wireless/realtek/rtw89/reg.h

@@ -275,6 +275,9 @@
 #define B_AX_S1_LDO2PWRCUT_F BIT(23)
 #define B_AX_S0_LDO_VSEL_F_MASK GENMASK(22, 21)
 
+#define R_AX_SEC_CTRL 0x0C00
+#define B_AX_SEC_IDMEM_SIZE_CONFIG_MASK GENMASK(17, 16)
+
 #define R_AX_FILTER_MODEL_ADDR 0x0C04
 
 #define R_AX_HAXI_INIT_CFG1 0x1000