Skip to content

L
linux
Commit 2e8a538d authored by Jeff Garzik's avatar Jeff Garzik
Browse files
Options

[netdrvr] Use dev_printk() when ethernet interface isn't available 

For messages prior to register_netdev(), prefer dev_printk() because
that prints out both our driver name and our [PCI | whatever] bus id.

Updates: 8139{cp,too}, b44, bnx2, cassini, {eepro,epic}100, fealnx,
	 hamachi, ne2k-pci, ns83820, pci-skeleton, r8169.
Signed-off-by: default avatarJeff Garzik <jeff@garzik.org>
parent cabb7667
Hide whitespace changes
Inline Side-by-side
Showing with 173 additions and 135 deletions
drivers/net/8139cp.c
View file @ 2e8a538d
......@@ -1836,9 +1836,11 @@ static int cp_init_one (struct pci_dev *pdev, const struct pci_device_id *ent)
if (pdev->vendor == PCI_VENDOR_ID_REALTEK &&
pdev->device == PCI_DEVICE_ID_REALTEK_8139 && pci_rev < 0x20) {
printk(KERN_ERR PFX "pci dev %s (id %04x:%04x rev %02x) is not an 8139C+ compatible chip\n",
pci_name(pdev), pdev->vendor, pdev->device, pci_rev);
printk(KERN_ERR PFX "Try the \"8139too\" driver instead.\n");
dev_printk(KERN_ERR, &pdev->dev,
"This (id %04x:%04x rev %02x) is not an 8139C+ compatible chip\n",
pdev->vendor, pdev->device, pci_rev);
dev_printk(KERN_ERR, &pdev->dev,
"Try the \"8139too\" driver instead.\n");
return -ENODEV;
}
......@@ -1876,14 +1878,14 @@ static int cp_init_one (struct pci_dev *pdev, const struct pci_device_id *ent)
pciaddr = pci_resource_start(pdev, 1);
if (!pciaddr) {
rc = -EIO;
printk(KERN_ERR PFX "no MMIO resource for pci dev %s\n",
pci_name(pdev));
dev_printk(KERN_ERR, &pdev->dev, "no MMIO resource\n");
goto err_out_res;
}
if (pci_resource_len(pdev, 1) < CP_REGS_SIZE) {
rc = -EIO;
printk(KERN_ERR PFX "MMIO resource (%llx) too small on pci dev %s\n",
(unsigned long long)pci_resource_len(pdev, 1), pci_name(pdev));
dev_printk(KERN_ERR, &pdev->dev,
"MMIO resource (%llx) too small\n",
(unsigned long long)pci_resource_len(pdev, 1));
goto err_out_res;
}
......@@ -1897,14 +1899,15 @@ static int cp_init_one (struct pci_dev *pdev, const struct pci_device_id *ent)
rc = pci_set_dma_mask(pdev, DMA_32BIT_MASK);
if (rc) {
printk(KERN_ERR PFX "No usable DMA configuration, "
"aborting.\n");
dev_printk(KERN_ERR, &pdev->dev,
"No usable DMA configuration, aborting.\n");
goto err_out_res;
}
rc = pci_set_consistent_dma_mask(pdev, DMA_32BIT_MASK);
if (rc) {
printk(KERN_ERR PFX "No usable consistent DMA configuration, "
"aborting.\n");
dev_printk(KERN_ERR, &pdev->dev,
"No usable consistent DMA configuration, "
"aborting.\n");
goto err_out_res;
}
}
......@@ -1915,9 +1918,10 @@ static int cp_init_one (struct pci_dev *pdev, const struct pci_device_id *ent)
regs = ioremap(pciaddr, CP_REGS_SIZE);
if (!regs) {
rc = -EIO;
printk(KERN_ERR PFX "Cannot map PCI MMIO (%llx@%llx) on pci dev %s\n",
(unsigned long long)pci_resource_len(pdev, 1),
(unsigned long long)pciaddr, pci_name(pdev));
dev_printk(KERN_ERR, &pdev->dev,
"Cannot map PCI MMIO (%llx@%llx)\n",
(unsigned long long)pci_resource_len(pdev, 1),
(unsigned long long)pciaddr);
goto err_out_res;
}
dev->base_addr = (unsigned long) regs;
......@@ -1986,7 +1990,8 @@ static int cp_init_one (struct pci_dev *pdev, const struct pci_device_id *ent)
/* enable busmastering and memory-write-invalidate */
pci_set_master(pdev);
if (cp->wol_enabled) cp_set_d3_state (cp);
if (cp->wol_enabled)
cp_set_d3_state (cp);
return 0;
......@@ -2011,7 +2016,8 @@ static void cp_remove_one (struct pci_dev *pdev)
BUG_ON(!dev);
unregister_netdev(dev);
iounmap(cp->regs);
if (cp->wol_enabled) pci_set_power_state (pdev, PCI_D0);
if (cp->wol_enabled)
pci_set_power_state (pdev, PCI_D0);
pci_release_regions(pdev);
pci_clear_mwi(pdev);
pci_disable_device(pdev);
......
drivers/net/8139too.c
View file @ 2e8a538d
......@@ -768,7 +768,8 @@ static int __devinit rtl8139_init_board (struct pci_dev *pdev,
/* dev and priv zeroed in alloc_etherdev */
dev = alloc_etherdev (sizeof (*tp));
if (dev == NULL) {
printk (KERN_ERR PFX "%s: Unable to alloc new net device\n", pci_name(pdev));
dev_printk (KERN_ERR, &pdev->dev,
"Unable to alloc new net device\n");
return -ENOMEM;
}
SET_MODULE_OWNER(dev);
......@@ -800,31 +801,35 @@ static int __devinit rtl8139_init_board (struct pci_dev *pdev,
#ifdef USE_IO_OPS
/* make sure PCI base addr 0 is PIO */
if (!(pio_flags & IORESOURCE_IO)) {
printk (KERN_ERR PFX "%s: region #0 not a PIO resource, aborting\n", pci_name(pdev));
dev_printk (KERN_ERR, &pdev->dev,
"region #0 not a PIO resource, aborting\n");
rc = -ENODEV;
goto err_out;
}
/* check for weird/broken PCI region reporting */
if (pio_len < RTL_MIN_IO_SIZE) {
printk (KERN_ERR PFX "%s: Invalid PCI I/O region size(s), aborting\n", pci_name(pdev));
dev_printk (KERN_ERR, &pdev->dev,
"Invalid PCI I/O region size(s), aborting\n");
rc = -ENODEV;
goto err_out;
}
#else
/* make sure PCI base addr 1 is MMIO */
if (!(mmio_flags & IORESOURCE_MEM)) {
printk (KERN_ERR PFX "%s: region #1 not an MMIO resource, aborting\n", pci_name(pdev));
dev_printk (KERN_ERR, &pdev->dev,
"region #1 not an MMIO resource, aborting\n");
rc = -ENODEV;
goto err_out;
}
if (mmio_len < RTL_MIN_IO_SIZE) {
printk (KERN_ERR PFX "%s: Invalid PCI mem region size(s), aborting\n", pci_name(pdev));
dev_printk (KERN_ERR, &pdev->dev,
"Invalid PCI mem region size(s), aborting\n");
rc = -ENODEV;
goto err_out;
}
#endif
rc = pci_request_regions (pdev, "8139too");
rc = pci_request_regions (pdev, DRV_NAME);
if (rc)
goto err_out;
disable_dev_on_err = 1;
......@@ -835,7 +840,7 @@ static int __devinit rtl8139_init_board (struct pci_dev *pdev,
#ifdef USE_IO_OPS
ioaddr = ioport_map(pio_start, pio_len);
if (!ioaddr) {
printk (KERN_ERR PFX "%s: cannot map PIO, aborting\n", pci_name(pdev));
dev_printk (KERN_ERR, &pdev->dev, "cannot map PIO, aborting\n");
rc = -EIO;
goto err_out;
}
......@@ -846,7 +851,8 @@ static int __devinit rtl8139_init_board (struct pci_dev *pdev,
/* ioremap MMIO region */
ioaddr = pci_iomap(pdev, 1, 0);
if (ioaddr == NULL) {
printk (KERN_ERR PFX "%s: cannot remap MMIO, aborting\n", pci_name(pdev));
dev_printk (KERN_ERR, &pdev->dev,
"cannot remap MMIO, aborting\n");
rc = -EIO;
goto err_out;
}
......@@ -860,8 +866,8 @@ static int __devinit rtl8139_init_board (struct pci_dev *pdev,
/* check for missing/broken hardware */
if (RTL_R32 (TxConfig) == 0xFFFFFFFF) {
printk (KERN_ERR PFX "%s: Chip not responding, ignoring board\n",
pci_name(pdev));
dev_printk (KERN_ERR, &pdev->dev,
"Chip not responding, ignoring board\n");
rc = -EIO;
goto err_out;
}
......@@ -875,9 +881,10 @@ static int __devinit rtl8139_init_board (struct pci_dev *pdev,
}
/* if unknown chip, assume array element #0, original RTL-8139 in this case */
printk (KERN_DEBUG PFX "%s: unknown chip version, assuming RTL-8139\n",
pci_name(pdev));
printk (KERN_DEBUG PFX "%s: TxConfig = 0x%lx\n", pci_name(pdev), RTL_R32 (TxConfig));
dev_printk (KERN_DEBUG, &pdev->dev,
"unknown chip version, assuming RTL-8139\n");
dev_printk (KERN_DEBUG, &pdev->dev,
"TxConfig = 0x%lx\n", RTL_R32 (TxConfig));
tp->chipset = 0;
match:
......@@ -954,9 +961,11 @@ static int __devinit rtl8139_init_one (struct pci_dev *pdev,
if (pdev->vendor == PCI_VENDOR_ID_REALTEK &&
pdev->device == PCI_DEVICE_ID_REALTEK_8139 && pci_rev >= 0x20) {
printk(KERN_INFO PFX "pci dev %s (id %04x:%04x rev %02x) is an enhanced 8139C+ chip\n",
pci_name(pdev), pdev->vendor, pdev->device, pci_rev);
printk(KERN_INFO PFX "Use the \"8139cp\" driver for improved performance and stability.\n");
dev_printk(KERN_INFO, &pdev->dev,
"This (id %04x:%04x rev %02x) is an enhanced 8139C+ chip\n",
pdev->vendor, pdev->device, pci_rev);
dev_printk(KERN_INFO, &pdev->dev,
"Use the \"8139cp\" driver for improved performance and stability.\n");
}
i = rtl8139_init_board (pdev, &dev);
......
drivers/net/b44.c
View file @ 2e8a538d
......@@ -2120,13 +2120,14 @@ static int __devinit b44_init_one(struct pci_dev *pdev,
err = pci_enable_device(pdev);
if (err) {
printk(KERN_ERR PFX "Cannot enable PCI device, "
dev_printk(KERN_ERR, &pdev->dev, "Cannot enable PCI device, "
"aborting.\n");
return err;
}
if (!(pci_resource_flags(pdev, 0) & IORESOURCE_MEM)) {
printk(KERN_ERR PFX "Cannot find proper PCI device "
dev_printk(KERN_ERR, &pdev->dev,
"Cannot find proper PCI device "
"base address, aborting.\n");
err = -ENODEV;
goto err_out_disable_pdev;
......@@ -2134,8 +2135,8 @@ static int __devinit b44_init_one(struct pci_dev *pdev,
err = pci_request_regions(pdev, DRV_MODULE_NAME);
if (err) {
printk(KERN_ERR PFX "Cannot obtain PCI resources, "
"aborting.\n");
dev_printk(KERN_ERR, &pdev->dev,
"Cannot obtain PCI resources, aborting.\n");
goto err_out_disable_pdev;
}
......@@ -2143,15 +2144,15 @@ static int __devinit b44_init_one(struct pci_dev *pdev,
err = pci_set_dma_mask(pdev, (u64) B44_DMA_MASK);
if (err) {
printk(KERN_ERR PFX "No usable DMA configuration, "
"aborting.\n");
dev_printk(KERN_ERR, &pdev->dev,
"No usable DMA configuration, aborting.\n");
goto err_out_free_res;
}
err = pci_set_consistent_dma_mask(pdev, (u64) B44_DMA_MASK);
if (err) {
printk(KERN_ERR PFX "No usable DMA configuration, "
"aborting.\n");
dev_printk(KERN_ERR, &pdev->dev,
"No usable DMA configuration, aborting.\n");
goto err_out_free_res;
}
......@@ -2160,7 +2161,8 @@ static int __devinit b44_init_one(struct pci_dev *pdev,
dev = alloc_etherdev(sizeof(*bp));
if (!dev) {
printk(KERN_ERR PFX "Etherdev alloc failed, aborting.\n");
dev_printk(KERN_ERR, &pdev->dev,
"Etherdev alloc failed, aborting.\n");
err = -ENOMEM;
goto err_out_free_res;
}
......@@ -2181,7 +2183,7 @@ static int __devinit b44_init_one(struct pci_dev *pdev,
bp->regs = ioremap(b44reg_base, b44reg_len);
if (bp->regs == 0UL) {
printk(KERN_ERR PFX "Cannot map device registers, "
dev_printk(KERN_ERR, &pdev->dev, "Cannot map device registers, "
"aborting.\n");
err = -ENOMEM;
goto err_out_free_dev;
......@@ -2212,8 +2214,8 @@ static int __devinit b44_init_one(struct pci_dev *pdev,
err = b44_get_invariants(bp);
if (err) {
printk(KERN_ERR PFX "Problem fetching invariants of chip, "
"aborting.\n");
dev_printk(KERN_ERR, &pdev->dev,
"Problem fetching invariants of chip, aborting.\n");
goto err_out_iounmap;
}
......@@ -2233,7 +2235,7 @@ static int __devinit b44_init_one(struct pci_dev *pdev,
err = register_netdev(dev);
if (err) {
printk(KERN_ERR PFX "Cannot register net device, "
dev_printk(KERN_ERR, &pdev->dev, "Cannot register net device, "
"aborting.\n");
goto err_out_iounmap;
}
......
drivers/net/bnx2.c
View file @ 2e8a538d
......@@ -5575,20 +5575,22 @@ bnx2_init_board(struct pci_dev *pdev, struct net_device *dev)
/* enable device (incl. PCI PM wakeup), and bus-mastering */
rc = pci_enable_device(pdev);
if (rc) {
printk(KERN_ERR PFX "Cannot enable PCI device, aborting.");
dev_printk(KERN_ERR, &pdev->dev,
"Cannot enable PCI device, aborting.");
goto err_out;
}
if (!(pci_resource_flags(pdev, 0) & IORESOURCE_MEM)) {
printk(KERN_ERR PFX "Cannot find PCI device base address, "
"aborting.\n");
dev_printk(KERN_ERR, &pdev->dev,
"Cannot find PCI device base address, aborting.\n");
rc = -ENODEV;
goto err_out_disable;
}
rc = pci_request_regions(pdev, DRV_MODULE_NAME);
if (rc) {
printk(KERN_ERR PFX "Cannot obtain PCI resources, aborting.\n");
dev_printk(KERN_ERR, &pdev->dev,
"Cannot obtain PCI resources, aborting.\n");
goto err_out_disable;
}
......@@ -5596,15 +5598,16 @@ bnx2_init_board(struct pci_dev *pdev, struct net_device *dev)
bp->pm_cap = pci_find_capability(pdev, PCI_CAP_ID_PM);
if (bp->pm_cap == 0) {
printk(KERN_ERR PFX "Cannot find power management capability, "
"aborting.\n");
dev_printk(KERN_ERR, &pdev->dev,
"Cannot find power management capability, aborting.\n");
rc = -EIO;
goto err_out_release;
}
bp->pcix_cap = pci_find_capability(pdev, PCI_CAP_ID_PCIX);
if (bp->pcix_cap == 0) {
printk(KERN_ERR PFX "Cannot find PCIX capability, aborting.\n");
dev_printk(KERN_ERR, &pdev->dev,
"Cannot find PCIX capability, aborting.\n");
rc = -EIO;
goto err_out_release;
}
......@@ -5612,14 +5615,15 @@ bnx2_init_board(struct pci_dev *pdev, struct net_device *dev)
if (pci_set_dma_mask(pdev, DMA_64BIT_MASK) == 0) {
bp->flags |= USING_DAC_FLAG;
if (pci_set_consistent_dma_mask(pdev, DMA_64BIT_MASK) != 0) {
printk(KERN_ERR PFX "pci_set_consistent_dma_mask "
"failed, aborting.\n");
dev_printk(KERN_ERR, &pdev->dev,
"pci_set_consistent_dma_mask failed, aborting.\n");
rc = -EIO;
goto err_out_release;
}
}
else if (pci_set_dma_mask(pdev, DMA_32BIT_MASK) != 0) {
printk(KERN_ERR PFX "System does not support DMA, aborting.\n");
dev_printk(KERN_ERR, &pdev->dev,
"System does not support DMA, aborting.\n");
rc = -EIO;
goto err_out_release;
}
......@@ -5639,7 +5643,8 @@ bnx2_init_board(struct pci_dev *pdev, struct net_device *dev)
bp->regview = ioremap_nocache(dev->base_addr, mem_len);
if (!bp->regview) {
printk(KERN_ERR PFX "Cannot map register space, aborting.\n");
dev_printk(KERN_ERR, &pdev->dev,
"Cannot map register space, aborting.\n");
rc = -ENOMEM;
goto err_out_release;
}
......@@ -5711,8 +5716,8 @@ bnx2_init_board(struct pci_dev *pdev, struct net_device *dev)
else if ((CHIP_ID(bp) == CHIP_ID_5706_A1) &&
!(bp->flags & PCIX_FLAG)) {
printk(KERN_ERR PFX "5706 A1 can only be used in a PCIX bus, "
"aborting.\n");
dev_printk(KERN_ERR, &pdev->dev,
"5706 A1 can only be used in a PCIX bus, aborting.\n");
goto err_out_unmap;
}
......@@ -5733,7 +5738,8 @@ bnx2_init_board(struct pci_dev *pdev, struct net_device *dev)
if ((reg & BNX2_DEV_INFO_SIGNATURE_MAGIC_MASK) !=
BNX2_DEV_INFO_SIGNATURE_MAGIC) {
printk(KERN_ERR PFX "Firmware not running, aborting.\n");
dev_printk(KERN_ERR, &pdev->dev,
"Firmware not running, aborting.\n");
rc = -ENODEV;
goto err_out_unmap;
}
......@@ -5895,7 +5901,8 @@ bnx2_init_one(struct pci_dev *pdev, const struct pci_device_id *ent)
#endif
if ((rc = register_netdev(dev))) {
printk(KERN_ERR PFX "Cannot register net device\n");
dev_printk(KERN_ERR, &pdev->dev,
"Cannot register net device\n");
if (bp->regview)
iounmap(bp->regview);
pci_release_regions(pdev);
......
drivers/net/cassini.c
View file @ 2e8a538d
......@@ -4887,13 +4887,13 @@ static int __devinit cas_init_one(struct pci_dev *pdev,
err = pci_enable_device(pdev);
if (err) {
printk(KERN_ERR PFX "Cannot enable PCI device, "
dev_printk(KERN_ERR, &pdev->dev, "Cannot enable PCI device, "
"aborting.\n");
return err;
}
if (!(pci_resource_flags(pdev, 0) & IORESOURCE_MEM)) {
printk(KERN_ERR PFX "Cannot find proper PCI device "
dev_printk(KERN_ERR, &pdev->dev, "Cannot find proper PCI device "
"base address, aborting.\n");
err = -ENODEV;
goto err_out_disable_pdev;
......@@ -4901,7 +4901,7 @@ static int __devinit cas_init_one(struct pci_dev *pdev,
dev = alloc_etherdev(sizeof(*cp));
if (!dev) {
printk(KERN_ERR PFX "Etherdev alloc failed, aborting.\n");
dev_printk(KERN_ERR, &pdev->dev, "Etherdev alloc failed, aborting.\n");
err = -ENOMEM;
goto err_out_disable_pdev;
}
......@@ -4910,7 +4910,7 @@ static int __devinit cas_init_one(struct pci_dev *pdev,
err = pci_request_regions(pdev, dev->name);
if (err) {
printk(KERN_ERR PFX "Cannot obtain PCI resources, "
dev_printk(KERN_ERR, &pdev->dev, "Cannot obtain PCI resources, "
"aborting.\n");
goto err_out_free_netdev;
}
......@@ -4941,7 +4941,7 @@ static int __devinit cas_init_one(struct pci_dev *pdev,
if (pci_write_config_byte(pdev,
PCI_CACHE_LINE_SIZE,
cas_cacheline_size)) {
printk(KERN_ERR PFX "Could not set PCI cache "
dev_printk(KERN_ERR, &pdev->dev, "Could not set PCI cache "
"line size\n");
goto err_write_cacheline;
}
......@@ -4955,7 +4955,7 @@ static int __devinit cas_init_one(struct pci_dev *pdev,
err = pci_set_consistent_dma_mask(pdev,
DMA_64BIT_MASK);
if (err < 0) {
printk(KERN_ERR PFX "Unable to obtain 64-bit DMA "
dev_printk(KERN_ERR, &pdev->dev, "Unable to obtain 64-bit DMA "
"for consistent allocations\n");
goto err_out_free_res;
}
......@@ -4963,7 +4963,7 @@ static int __devinit cas_init_one(struct pci_dev *pdev,
} else {
err = pci_set_dma_mask(pdev, DMA_32BIT_MASK);
if (err) {
printk(KERN_ERR PFX "No usable DMA configuration, "
dev_printk(KERN_ERR, &pdev->dev, "No usable DMA configuration, "
"aborting.\n");
goto err_out_free_res;
}
......@@ -5023,7 +5023,7 @@ static int __devinit cas_init_one(struct pci_dev *pdev,
/* give us access to cassini registers */
cp->regs = pci_iomap(pdev, 0, casreg_len);
if (cp->regs == 0UL) {
printk(KERN_ERR PFX "Cannot map device registers, "
dev_printk(KERN_ERR, &pdev->dev, "Cannot map device registers, "
"aborting.\n");
goto err_out_free_res;
}
......@@ -5040,7 +5040,7 @@ static int __devinit cas_init_one(struct pci_dev *pdev,
pci_alloc_consistent(pdev, sizeof(struct cas_init_block),
&cp->block_dvma);
if (!cp->init_block) {
printk(KERN_ERR PFX "Cannot allocate init block, "
dev_printk(KERN_ERR, &pdev->dev, "Cannot allocate init block, "
"aborting.\n");
goto err_out_iounmap;
}
......@@ -5085,7 +5085,7 @@ static int __devinit cas_init_one(struct pci_dev *pdev,
dev->features |= NETIF_F_HIGHDMA;
if (register_netdev(dev)) {
printk(KERN_ERR PFX "Cannot register net device, "
dev_printk(KERN_ERR, &pdev->dev, "Cannot register net device, "
"aborting.\n");
goto err_out_free_consistent;
}
......
drivers/net/eepro100.c
View file @ 2e8a538d
......@@ -555,12 +555,14 @@ static int __devinit eepro100_init_one (struct pci_dev *pdev,
if (!request_region(pci_resource_start(pdev, 1),
pci_resource_len(pdev, 1), "eepro100")) {
printk (KERN_ERR "eepro100: cannot reserve I/O ports\n");
dev_printk (KERN_ERR, &pdev->dev,
"eepro100: cannot reserve I/O ports\n");
goto err_out_none;
}
if (!request_mem_region(pci_resource_start(pdev, 0),
pci_resource_len(pdev, 0), "eepro100")) {
printk (KERN_ERR "eepro100: cannot reserve MMIO region\n");
dev_printk (KERN_ERR, &pdev->dev,
"eepro100: cannot reserve MMIO region\n");
goto err_out_free_pio_region;
}
......@@ -573,7 +575,7 @@ static int __devinit eepro100_init_one (struct pci_dev *pdev,
ioaddr = pci_iomap(pdev, pci_bar, 0);
if (!ioaddr) {
printk (KERN_ERR "eepro100: cannot remap IO\n");
dev_printk (KERN_ERR, &pdev->dev, "eepro100: cannot remap IO\n");
goto err_out_free_mmio_region;
}
......
drivers/net/epic100.c
View file @ 2e8a538d
......@@ -422,8 +422,7 @@ static int __devinit epic_init_one (struct pci_dev *pdev,
((u16 *)dev->dev_addr)[i] = le16_to_cpu(inw(ioaddr + LAN0 + i*4));
if (debug > 2) {
printk(KERN_DEBUG DRV_NAME "(%s): EEPROM contents\n",
pci_name(pdev));
dev_printk(KERN_DEBUG, &pdev->dev, "EEPROM contents:\n");
for (i = 0; i < 64; i++)
printk(" %4.4x%s", read_eeprom(ioaddr, i),
i % 16 == 15 ? "\n" : "");
......@@ -445,21 +444,23 @@ static int __devinit epic_init_one (struct pci_dev *pdev,
int mii_status = mdio_read(dev, phy, MII_BMSR);
if (mii_status != 0xffff && mii_status != 0x0000) {
ep->phys[phy_idx++] = phy;
printk(KERN_INFO DRV_NAME "(%s): MII transceiver #%d control "
"%4.4x status %4.4x.\n",
pci_name(pdev), phy, mdio_read(dev, phy, 0), mii_status);
dev_printk(KERN_INFO, &pdev->dev,
"MII transceiver #%d control "
"%4.4x status %4.4x.\n",
phy, mdio_read(dev, phy, 0), mii_status);
}
}
ep->mii_phy_cnt = phy_idx;
if (phy_idx != 0) {
phy = ep->phys[0];
ep->mii.advertising = mdio_read(dev, phy, MII_ADVERTISE);
printk(KERN_INFO DRV_NAME "(%s): Autonegotiation advertising %4.4x link "
dev_printk(KERN_INFO, &pdev->dev,
"Autonegotiation advertising %4.4x link "
"partner %4.4x.\n",
pci_name(pdev), ep->mii.advertising, mdio_read(dev, phy, 5));
ep->mii.advertising, mdio_read(dev, phy, 5));
} else if ( ! (ep->chip_flags & NO_MII)) {
printk(KERN_WARNING DRV_NAME "(%s): ***WARNING***: No MII transceiver found!\n",
pci_name(pdev));
dev_printk(KERN_WARNING, &pdev->dev,
"***WARNING***: No MII transceiver found!\n");
/* Use the known PHY address of the EPII. */
ep->phys[0] = 3;
}
......@@ -474,8 +475,8 @@ static int __devinit epic_init_one (struct pci_dev *pdev,
/* The lower four bits are the media type. */
if (duplex) {
ep->mii.force_media = ep->mii.full_duplex = 1;
printk(KERN_INFO DRV_NAME "(%s): Forced full duplex operation requested.\n",
pci_name(pdev));
dev_printk(KERN_INFO, &pdev->dev,
"Forced full duplex operation requested.\n");
}
dev->if_port = ep->default_port = option;
......
drivers/net/fealnx.c
View file @ 2e8a538d
......@@ -578,9 +578,9 @@ static int __devinit fealnx_init_one(struct pci_dev *pdev,
if (mii_status != 0xffff && mii_status != 0x0000) {
np->phys[phy_idx++] = phy;
printk(KERN_INFO
"%s: MII PHY found at address %d, status "
"0x%4.4x.\n", dev->name, phy, mii_status);
dev_printk(KERN_INFO, &pdev->dev,
"MII PHY found at address %d, status "
"0x%4.4x.\n", phy, mii_status);
/* get phy type */
{
unsigned int data;
......@@ -603,10 +603,10 @@ static int __devinit fealnx_init_one(struct pci_dev *pdev,
}
np->mii_cnt = phy_idx;
if (phy_idx == 0) {
printk(KERN_WARNING "%s: MII PHY not found -- this device may "
"not operate correctly.\n", dev->name);
}
if (phy_idx == 0)
dev_printk(KERN_WARNING, &pdev->dev,
"MII PHY not found -- this device may "
"not operate correctly.\n");
} else {
np->phys[0] = 32;
/* 89/6/23 add, (begin) */
......@@ -632,7 +632,8 @@ static int __devinit fealnx_init_one(struct pci_dev *pdev,
np->mii.full_duplex = full_duplex[card_idx];
if (np->mii.full_duplex) {
printk(KERN_INFO "%s: Media type forced to Full Duplex.\n", dev->name);
dev_printk(KERN_INFO, &pdev->dev,
"Media type forced to Full Duplex.\n");
/* 89/6/13 add, (begin) */
// if (np->PHYType==MarvellPHY)
if ((np->PHYType == MarvellPHY) || (np->PHYType == LevelOnePHY)) {
......
drivers/net/hamachi.c
View file @ 2e8a538d
......@@ -601,7 +601,8 @@ static int __devinit hamachi_init_one (struct pci_dev *pdev,
pci_set_master(pdev);
i = pci_request_regions(pdev, DRV_NAME);
if (i) return i;
if (i)
return i;
irq = pdev->irq;
ioaddr = ioremap(base, 0x400);
......
drivers/net/ne2k-pci.c
View file @ 2e8a538d
......@@ -231,12 +231,14 @@ static int __devinit ne2k_pci_init_one (struct pci_dev *pdev,
irq = pdev->irq;
if (!ioaddr || ((pci_resource_flags (pdev, 0) & IORESOURCE_IO) == 0)) {
printk (KERN_ERR PFX "no I/O resource at PCI BAR #0\n");
dev_printk (KERN_ERR, &pdev->dev,
"no I/O resource at PCI BAR #0\n");
return -ENODEV;
}
if (request_region (ioaddr, NE_IO_EXTENT, DRV_NAME) == NULL) {
printk (KERN_ERR PFX "I/O resource 0x%x @ 0x%lx busy\n",
dev_printk (KERN_ERR, &pdev->dev,
"I/O resource 0x%x @ 0x%lx busy\n",
NE_IO_EXTENT, ioaddr);
return -EBUSY;
}
......@@ -263,7 +265,8 @@ static int __devinit ne2k_pci_init_one (struct pci_dev *pdev,
/* Allocate net_device, dev->priv; fill in 8390 specific dev fields. */
dev = alloc_ei_netdev();
if (!dev) {
printk (KERN_ERR PFX "cannot allocate ethernet device\n");
dev_printk (KERN_ERR, &pdev->dev,
"cannot allocate ethernet device\n");
goto err_out_free_res;
}
SET_MODULE_OWNER(dev);
......@@ -281,7 +284,8 @@ static int __devinit ne2k_pci_init_one (struct pci_dev *pdev,
while ((inb(ioaddr + EN0_ISR) & ENISR_RESET) == 0)
/* Limit wait: '2' avoids jiffy roll-over. */
if (jiffies - reset_start_time > 2) {
printk(KERN_ERR PFX "Card failure (no reset ack).\n");
dev_printk(KERN_ERR, &pdev->dev,
"Card failure (no reset ack).\n");
goto err_out_free_netdev;
}
......
drivers/net/ns83820.c
View file @ 2e8a538d
......@@ -1832,7 +1832,8 @@ static int __devinit ns83820_init_one(struct pci_dev *pci_dev, const struct pci_
} else if (!pci_set_dma_mask(pci_dev, DMA_32BIT_MASK)) {
using_dac = 0;
} else {
printk(KERN_WARNING "ns83820.c: pci_set_dma_mask failed!\n");
dev_printk(KERN_WARNING, &pci_dev->dev,
"pci_set_dma_mask failed!\n");
return -ENODEV;
}
......@@ -1855,7 +1856,8 @@ static int __devinit ns83820_init_one(struct pci_dev *pci_dev, const struct pci_
err = pci_enable_device(pci_dev);
if (err) {
printk(KERN_INFO "ns83820: pci_enable_dev failed: %d\n", err);
dev_printk(KERN_INFO, &pci_dev->dev,
"pci_enable_dev failed: %d\n", err);
goto out_free;
}
......@@ -1884,8 +1886,9 @@ static int __devinit ns83820_init_one(struct pci_dev *pci_dev, const struct pci_
err = request_irq(pci_dev->irq, ns83820_irq, IRQF_SHARED,
DRV_NAME, ndev);
if (err) {
printk(KERN_INFO "ns83820: unable to register irq %d\n",
pci_dev->irq);
dev_printk(KERN_INFO, &pci_dev->dev,
"unable to register irq %d, err %d\n",
pci_dev->irq, err);
goto out_disable;
}
......@@ -1899,7 +1902,8 @@ static int __devinit ns83820_init_one(struct pci_dev *pci_dev, const struct pci_
rtnl_lock();
err = dev_alloc_name(ndev, ndev->name);
if (err < 0) {
printk(KERN_INFO "ns83820: unable to get netdev name: %d\n", err);
dev_printk(KERN_INFO, &pci_dev->dev,
"unable to get netdev name: %d\n", err);
goto out_free_irq;
}
......
drivers/net/pci-skeleton.c
View file @ 2e8a538d
......@@ -601,7 +601,8 @@ static int __devinit netdrv_init_board (struct pci_dev *pdev,
/* dev zeroed in alloc_etherdev */
dev = alloc_etherdev (sizeof (*tp));
if (dev == NULL) {
printk (KERN_ERR PFX "unable to alloc new ethernet\n");
dev_printk (KERN_ERR, &pdev->dev,
"unable to alloc new ethernet\n");
DPRINTK ("EXIT, returning -ENOMEM\n");
return -ENOMEM;
}
......@@ -631,14 +632,16 @@ static int __devinit netdrv_init_board (struct pci_dev *pdev,
/* make sure PCI base addr 0 is PIO */
if (!(pio_flags & IORESOURCE_IO)) {
printk (KERN_ERR PFX "region #0 not a PIO resource, aborting\n");
dev_printk (KERN_ERR, &pdev->dev,
"region #0 not a PIO resource, aborting\n");
rc = -ENODEV;
goto err_out;
}
/* make sure PCI base addr 1 is MMIO */
if (!(mmio_flags & IORESOURCE_MEM)) {
printk (KERN_ERR PFX "region #1 not an MMIO resource, aborting\n");
dev_printk (KERN_ERR, &pdev->dev,
"region #1 not an MMIO resource, aborting\n");
rc = -ENODEV;
goto err_out;
}
......@@ -646,12 +649,13 @@ static int __devinit netdrv_init_board (struct pci_dev *pdev,
/* check for weird/broken PCI region reporting */
if ((pio_len < NETDRV_MIN_IO_SIZE) ||
(mmio_len < NETDRV_MIN_IO_SIZE)) {
printk (KERN_ERR PFX "Invalid PCI region size(s), aborting\n");
dev_printk (KERN_ERR, &pdev->dev,
"Invalid PCI region size(s), aborting\n");
rc = -ENODEV;
goto err_out;
}
rc = pci_request_regions (pdev, "pci-skeleton");
rc = pci_request_regions (pdev, MODNAME);
if (rc)
goto err_out;
......@@ -663,7 +667,8 @@ static int __devinit netdrv_init_board (struct pci_dev *pdev,
/* ioremap MMIO region */
ioaddr = ioremap (mmio_start, mmio_len);
if (ioaddr == NULL) {
printk (KERN_ERR PFX "cannot remap MMIO, aborting\n");
dev_printk (KERN_ERR, &pdev->dev,
"cannot remap MMIO, aborting\n");
rc = -EIO;
goto err_out_free_res;
}
......@@ -699,9 +704,10 @@ static int __devinit netdrv_init_board (struct pci_dev *pdev,
}
/* if unknown chip, assume array element #0, original RTL-8139 in this case */
printk (KERN_DEBUG PFX "PCI device %s: unknown chip version, assuming RTL-8139\n",
pci_name(pdev));
printk (KERN_DEBUG PFX "PCI device %s: TxConfig = 0x%lx\n", pci_name(pdev), NETDRV_R32 (TxConfig));
dev_printk (KERN_DEBUG, &pdev->dev,
"unknown chip version, assuming RTL-8139\n");
dev_printk (KERN_DEBUG, &pdev->dev, "TxConfig = 0x%lx\n",
NETDRV_R32 (TxConfig));
tp->chipset = 0;
match:
......
drivers/net/r8169.c
View file @ 2e8a538d
......@@ -1406,7 +1406,8 @@ rtl8169_init_board(struct pci_dev *pdev, struct net_device **dev_out,
dev = alloc_etherdev(sizeof (*tp));
if (dev == NULL) {
if (netif_msg_drv(&debug))
printk(KERN_ERR PFX "unable to alloc new ethernet\n");
dev_printk(KERN_ERR, &pdev->dev,
"unable to alloc new ethernet\n");
goto err_out;
}
......@@ -1418,10 +1419,8 @@ rtl8169_init_board(struct pci_dev *pdev, struct net_device **dev_out,
/* enable device (incl. PCI PM wakeup and hotplug setup) */
rc = pci_enable_device(pdev);
if (rc < 0) {
if (netif_msg_probe(tp)) {
printk(KERN_ERR PFX "%s: enable failure\n",
pci_name(pdev));
}
if (netif_msg_probe(tp))
dev_printk(KERN_ERR, &pdev->dev, "enable failure\n");
goto err_out_free_dev;
}
......@@ -1437,37 +1436,33 @@ rtl8169_init_board(struct pci_dev *pdev, struct net_device **dev_out,
pci_read_config_word(pdev, pm_cap + PCI_PM_CTRL, &pwr_command);
acpi_idle_state = pwr_command & PCI_PM_CTRL_STATE_MASK;
} else {
if (netif_msg_probe(tp)) {
printk(KERN_ERR PFX
if (netif_msg_probe(tp))
dev_printk(KERN_ERR, &pdev->dev,
"PowerManagement capability not found.\n");
}
}
/* make sure PCI base addr 1 is MMIO */
if (!(pci_resource_flags(pdev, 1) & IORESOURCE_MEM)) {
if (netif_msg_probe(tp)) {
printk(KERN_ERR PFX
if (netif_msg_probe(tp))
dev_printk(KERN_ERR, &pdev->dev,
"region #1 not an MMIO resource, aborting\n");
}
rc = -ENODEV;
goto err_out_mwi;
}
/* check for weird/broken PCI region reporting */
if (pci_resource_len(pdev, 1) < R8169_REGS_SIZE) {
if (netif_msg_probe(tp)) {
printk(KERN_ERR PFX
if (netif_msg_probe(tp))
dev_printk(KERN_ERR, &pdev->dev,
"Invalid PCI region size(s), aborting\n");
}
rc = -ENODEV;
goto err_out_mwi;
}
rc = pci_request_regions(pdev, MODULENAME);
if (rc < 0) {
if (netif_msg_probe(tp)) {
printk(KERN_ERR PFX "%s: could not request regions.\n",
pci_name(pdev));
}
if (netif_msg_probe(tp))
dev_printk(KERN_ERR, &pdev->dev,
"could not request regions.\n");
goto err_out_mwi;
}
......@@ -1480,10 +1475,9 @@ rtl8169_init_board(struct pci_dev *pdev, struct net_device **dev_out,
} else {
rc = pci_set_dma_mask(pdev, DMA_32BIT_MASK);
if (rc < 0) {
if (netif_msg_probe(tp)) {
printk(KERN_ERR PFX
if (netif_msg_probe(tp))
dev_printk(KERN_ERR, &pdev->dev,
"DMA configuration failed.\n");
}
goto err_out_free_res;
}
}
......@@ -1494,7 +1488,8 @@ rtl8169_init_board(struct pci_dev *pdev, struct net_device **dev_out,
ioaddr = ioremap(pci_resource_start(pdev, 1), R8169_REGS_SIZE);
if (ioaddr == NULL) {
if (netif_msg_probe(tp))
printk(KERN_ERR PFX "cannot remap MMIO, aborting\n");
dev_printk(KERN_ERR, &pdev->dev,
"cannot remap MMIO, aborting\n");
rc = -EIO;
goto err_out_free_res;
}
......@@ -1526,9 +1521,9 @@ rtl8169_init_board(struct pci_dev *pdev, struct net_device **dev_out,
if (i < 0) {
/* Unknown chip: assume array element #0, original RTL-8169 */
if (netif_msg_probe(tp)) {
printk(KERN_DEBUG PFX "PCI device %s: "
dev_printk(KERN_DEBUG, &pdev->dev,
"unknown chip version, assuming %s\n",
pci_name(pdev), rtl_chip_info[0].name);
rtl_chip_info[0].name);
}
i++;
}
......
Markdown is supported
0% or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment
GitLab Nexedi Edition | About GitLab | About Nexedi | 沪ICP备2021021310号-2 | 沪ICP备2021021310号-7